Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. Ncodpfx Asd Nm Sism Tsw

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) --- Nsdsfci D Aopfx Am Tscw

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers Ncedpfx Amoffh Atj Tjw + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, Ncedpfx Amsfmqq Es Tew for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Nedpfsd Nnwljx Am Tscw Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Nodpfx Amsfhql Tj Tecw Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net Nodpfj E Dquex Am Tocw -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Pressure: adjustable up to a maximum of 250 bar Throughput: up to max. 220 kg/h Ncjdpswcc D Rsfx Am Tew Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size less than 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Pay attention to: sand, stones, and minerals - Compressed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at an extra cost: Plant construction / mütek system technology: - mütek Shredder MRZ shredding technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Transport screws - Silos - Control system interfaces of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with a stirrer. In each of the 4 corners of the storage silo, there is a vertical screw that compacts the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either when the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput up to a maximum of 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces via screw feed. Fully automatic 24-hour operation possible. High energy efficiency. Briquettes/pellets with consistently high quality and density. Nodpfjfbb Arex Am Tecw For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar-based materials).

Condition: used, amount 20 weight 0,5 kg Nedpfey Spv Sjx Am Tocw material HSS

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm - hopper diameter: 1000 mm Ncjdpfx Amozbazve Tjw - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg ADVANTAGES – Italian manufacture – used briquetting press – not repainted – very good condition Net price: 33,900 PLN Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations) Ncodpfx Aszbavysm Tjw

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Nodjr Iyrmjpfx Am Tjcw Bonding patterns: line: - square plate 640x320 mm - parallel parallel plate 640x320 mm

Condition: excellent (used), Year of construction: 1997, Kallesoe Press LV5019 with feeder and glue applicator Ncedpfjt Ea E Isx Am Tjw

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm Ncedpfx Asyi Ht Iom Tow Capacity ca. 3.000 - 5.000 kg/h Number of press rollers 2 Münch RMP 660 pellet press for producing wood pellets and biomass pellets from sawdust, wood chips, and other organic waste materials. The machine is suitable for industrial pellet production with high pressing performance and consistent pellet quality. Ideal for wood processors, sawmills, and biomass companies.

Condition: used, length 2.800 mm width 600 mm height 1.800 mm Ncedpfeviwqmjx Am Tsw Number of pressing cylinders 6 Stk. work height max. ca. 1.000 mm Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without pressure shoe.

Condition: used, Year of construction: 2003, power: 250 kW (339.91 HP), CPM 7930-4 Pellet Mill High-capacity pellet production machine manufactured by CPM. Designed for processing wood, biomass, animal feed and other pelletizable materials into pellets. The machine has been used for only one season and is in very good technical condition. Equipped with: Electric motor: 250 kW Mixer Feed screw conveyor Complete set of rollers Die Manufacturer: CPM Ncodpfx Aezlgxbom Tjw Model: 7930-4 Year of manufacture: 2003 A key machine for a complete pellet production line – ready for installation and operation.

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system Ncjdpfxjzlyv Te Am Tsw • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Shelf press Tiger 1000x2200 19/26 Nodpfxszkh H Rs Am Tocw

Year of construction: 1985, condition: used, closing pressure 4360 kN Ncodpjtqqr Esfx Am Tsw table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: excellent (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 30,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Nsdpfxey U D Uus Am Tecw

Year of construction: 1998, condition: excellent (used), Press with working dimensions 4.5m X 1.9m Ncedpfjlzi S Nex Am Tsw

Year of construction: 2000, condition: excellent (used), Please contact us for more information Nedpfsk Nn Ilex Am Tjcw

Year of construction: 2002, condition: excellent (used), Machine used for disassembly in very good condition. We can also offer a disassembly and assembly service as well as technical inspection. Nsdehq Dcyspfx Am Tocw

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Maximum pressing force approximately 1000 kp. Njdpfx Asy Tly Aom Tjcw Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.