Used radial drilling machines 1000-1299mm arm length for sale (66)

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals Isdpfx Ahsx Hfugs Ujbf

Condition: new, Year of construction: 2023, 50 mm 1250 mm 1345 - MK 5 bore depth 270 mm Ibjdewp S U Sopfx Ah Ujf spindle turning speed range 56-1450 U/min

Condition: good (used), Year of construction: 1979, machine/vehicle number: 1425, Offer 25414 Iodpfx Ahex Hgixo Usbf Technical Data: - Drilling capacity in steel ST 60: 32 mm - Drilling capacity when reaming: 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Arm reach min. / max.: 250 / 1000 mm - Arm lift: 600 mm - Min. / max. distance, spindle to base plate: approx. 650 - 1250 mm - Machined base plate clamping surface: 1150 x 700 mm - 8 spindle speeds: 100 - 2240 rpm - 4 feeds: 0.15 - 0.30 mm/rev - Drill spindle drive: 400 V / 3.5 kW - Cube table - Coolant system - Space requirement approx.: 1700 (W) x 1960 + 500 (H) x 700 mm - Weight approx.: 1200 kg

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm Ijdpev S Ay Sjfx Ah Usbf spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: good (used), 12 speeds 44–1500 rpm. TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Ibjdpfsxxv Rasx Ah Uef Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Transport dimensions: Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table Ijdsxxpcpjpfx Ah Uobf - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Iodpfx Ajx Eb Rfjh Ujbf Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: good (used), Year of construction: 1996, throat depth: 2,070 mm, Drilling capacity in steel (diameter): 50 mm Arm length: 2070 mm Spindle speed: 800 rpm Total power requirement: 8 kW Approx. machine weight: 6 t Ibsdpfxox Eig Ij Ah Ujf Space requirement approx.: 3.5 x 1.5 x 3.0 m

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Ibjdpfsvm Akgex Ah Usf universal head portable radial

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm Ibsdpfx Aewid Aush Uef range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz Ibjdpfxou T Ty Hs Ah Ujf - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) - CNC adjustable with paper belt filter Isdpjxxpb Sjfx Ah Usbf - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Ijdpfx Ahsxwcyfe Uebf Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, throat depth: 1,250 mm, spindle mount: MK 5, VEB Werkzeugmaschinen Magdeburg Type: BR40/2 x 1250 Refurbished around 2020 Year of manufacture: 1986 Ibsdpfxexzr Tps Ah Ujf Drilling capacity in steel: 40 mm Outreach: 1250 mm Max. workpiece height: 1390 mm Clamping surface: 1450 x 920 mm Table surface: 750 x 1350 mm Clamping surface: 1450 x 920 mm Spindle taper: MK 5 Total power requirement: 5 kW Clamping cube: 620 x 500 x 500 mm Weight: 3 t The drilling machine must be dismantled or collected by December 2025. You can inspect and test the machine at any time. Location: Leipzig.

Condition: excellent (used), functionality: fully functional, total height: 3,100 mm, drilling capacity: 50 mm, total width: 960 mm, total length: 2,180 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 38 rpm, spindle mount: MK 5, overall weight: 3,200 kg, type of input current: three-phase, Heavy radial drilling machine in very good and clean condition, including a large drilling cube and various quick-change tool holders. Ibedsxtf T Topfx Ah Uef

Condition: good (used), Year of construction: 1995, functionality: fully functional, Brand: WMW Heckert Model: BR 40/2 x 1250 Capacity: 40 mm Throat: 1,250 mm Spindle taper: MK4 Stroke: 350 mm Drill head (LxWxH): 600 x 800 x 500 mm Min. speed: 20 RPM Max. speed: 1,200 RPM Speeds: 3-step and variable Automatic feed Ibedpfjxrv Ekox Ah Ujf Machine dimensions (LxWxH): 2,050 x 950 x 2,750 mm Machine weight: 3,000 kg Electric height adjustment Electrically operated axis unlocking and locking Note: The information on this page has been obtained and assembled with the utmost care, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract, and we recommend checking all relevant details. Financial information VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm Ijdpfexvzx Dex Ah Uebf - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Year of Manufacture 2007 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Spindle Stroke 280mm Ibsdpfx Ajxawcmsh Ujf Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Ibodpfxowrukzj Ah Ujf Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light LED lamp Overload protection Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: not inspected (used), functionality: fully functional, Maintained radial drilling machine drilling capacity in steel: 40,0 mm throat: 1300 mm tool holder: MK4 max. swivel angle: +/- 180 degrees quill stroke: 280 mm Min. distance column - drilling spindle (X) 593 mm Max distance column - drilling spindle (X) 1473 mm Speed: 52 - 2000 rpm (12 steps) Feed rate: 0,05-0,1-0,2-0,3 mm/rev (4 steps) column diameter: 250 mm spindle diameter: 68 mm clamping area: approx. 1445 x 810 mm operating voltage: 400 V Total power requirement: 5.5 kW Machine weight: approx. 2815 kg. Space requirement (L x W x H): 2010 x 820 x 2495 mm Equipment: - electric height adjustment - hydraulic clamping of the drilling slide and the column - cube clamping table with T-slots - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from boom - speed adjustment manual - feed adjustment manual - handwheel for drill carriage adjustment We will be pleased to demonstrate the machine under power on site. Ibjdpfsirngaex Ah Uef All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Ibsdpfx Ahovhbpqe Ujf Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Iedsxu Iaropfx Ah Uebf Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Iodpfx Aev Hngmoh Ujbf

Condition: like new (used), Year of construction: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Spindle: MK4 Spindle Speeds: (12) 45-2000 RPM Ibedpog I I Ekefx Ah Ujf Drill head displacement: 350-1250mm Distance spindle base plate: 350-1420mm

Condition: new, column diameter: 432messurements (LxWxH): 3050 x 1185 x 3050weight approx.: 5600drilling performance: Stahl (S235JR) - 70Clamping table length: 1000Clamping table height: 500connected load: 11speed range: 44 - 1023Number of speed ranges: 29 - 1575traverse path - x: 1185traverse path - y: 1000Versatile application range, e.g., drilling, reaming, threading Electrically braked motor 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Heavy, massive, high-quality cast construction Wide reach thanks to horizontally adjustable machine head Clearly arranged control panel Smooth swivel and travel axes Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Robust, torsion-resistant construction of the arm Height adjustment of the arm via powerful motorized drive and lifting spindle Drill head gearbox running in an oil bath Arm guideways hardened and precision ground Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation Drill head and column can be clamped or released together or separately Ibjdpfxowruk Ue Ah Uof Right-left rotation Massive, precise drill table, generously dimensioned Hardened and ground worktable with parallel T-slots Machine light Overload protection Thick-walled cast column ensures smooth running and stability LED lamp Coolant system with coolant tank integrated in the machine base Model: RD 6 / RD 7 Column is hydraulically clamped