Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Djde Aflwyjpfx Apmokw

Year of construction: 2005, operating hours: 5 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 333, Hello, Djdpfjz R Iy Asx Apmokw We have a Zimmerman VBZ250 machine for sale. The machine is in full working order, has a 6.5 kW engine, and features an electrically adjustable base.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Dksdpfxezxyfho Apmow Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Dsdpfx Aezx R Dnepmekw Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Dedpfxe Afunhj Apmekw Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm Dodpfx Apoz Tflnemjkw - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). Dksdpfxs Adfdde Apmow • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Dkedpjzxqapjfx Apmow

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Dksdpfezz Nmmex Apmew

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Dkjdpfxs Ahgkde Apmsw Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Dksdpfxez Ngk Ro Apmew

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Dodpfx Apeugvxxemskw Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1287, Two-head profiling machine, Cheyenne SP2 600, manufactured in 2024. Connection: 3 x 400 V, CE version. Dimensions: approximately 1300 x 1300 x 1600 mm (H), weight: approximately 580 kg. Maximum workpiece width: 600 mm, maximum thickness: 300 mm, minimum length: 300 mm. 2 brushes (maximum diameter 200 mm), 2 pressure rollers per unit, 2 extraction hoods with a diameter of 150 mm per brush. Adjustable feed rate: 3 - 12 m/min, fixed brush speed: 915 rpm, manual brush adjustment with handwheel and mechanical measuring rod. Motor power: 4 kW. Dkjdpfx Apoz Ngkkemow

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Dodpfjz S Eidjx Apmokw Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Dkedpfo Af Uubsx Apmow Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Abrasive belt width, 1st unit: 1115 mm 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Dkjdpfx Apsz R Duvsmow Control: Hand-operated control panel Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Motor power: 15 kW Dust extraction diameter: 2x160 mm Location:

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface mechanical oscillation adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Dedpfxsy N Ry Hj Apmskw Mobile construction CE marking External dimensions: 2300x1200x1600

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm - Sanding belt 1115 x 1900 mm Dedpfoz Rmxdjx Apmjkw - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Dksdpfxjznvp Is Apmsw Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW Dkedpfx Aoy N N Ntopmsw - 400 V - Year: 2002

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm Djdpfx Aey N N N Hepmjkw - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment - Motor: 3.4 kW - 380 V - Year: 1992

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of workpiece 970 mm - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake * from above: - metal roller, sliding - pressure roller Djdpfxjzxg H Se Apmskw - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. Dksdpfx Asy Uahwepmow The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable Dkodpfx Apszznh Nemow integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: used, For sale is a wide-belt sanding machine from Hans Johannsen, with a table size of approximately 2600x900mm. Dsdpfo Ad Rhusx Apmskw Machine footprint: Length approximately 3800mm Width approximately 2000mm The wide-belt sanding machine is functional and in used condition, commensurate with its age. You are welcome to inspect it. Transfer in as-is condition, as inspected, without any warranty or guarantee. Available for pickup in 41334 Nettetal.