Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor Dsdoy H Itfepfx Adiewd 0.4kw belt oscillation motor

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Equipped with an AL-KO dust extraction system (excluding filters) Dwsdpfx Adj Aayf Ujijd

Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Dwsdpfo Aitdhsx Adijd Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Location: Supplier

Condition: ready for operation (used), Working width: 1350 mm Workpiece thickness: 3-160 mm Dwsdpj Ah Rv Njfx Adijd Workpiece length: min. 200 mm Belt speed: 22 m/s Belt dimensions: 1330 x 1900 mm Feed rate: 6-25 m/min Feed motor: approx. 1.1 kW Height adjustment motor: approx. 1.1 kW Drive motor: approx. 18.5 kW Weight: approx. 2750 kg Equipment: Roller assembly Sanding shoe assembly Outfeed and infeed roller guide No cleaning brush The machine can currently be inspected and tested. The data was taken from a data sheet; therefore, no guarantee is given regarding its accuracy.

Condition: used, Year of construction: 2018, total width: 1,899 mm, total height: 2,264 mm, total length: 2,580 mm, working width: 1,350 mm, grinding width: 1,370 mm, overall weight: 1,890 kg, table height: 900 mm, Wide-belt sanding machine Manufacturer: SCM GROUP spa Brand: Casadei Type: Libra 55 RTC 135 Year of manufacture: 2018 Weight: 1,890 kg Technical specifications: Max. working width: 1,350 mm Working height (adjustable table): 4 to 170 mm Working height (optional fixed table): 4 to 200 mm Sanding belt width: 1,370 mm Sanding belt length: 2,620 mm Feed rate: 3 stages: 4, 5, and 9 m/min Power of feed motor: 0.45 / 0.8 kW Power of main motor: 11 kW (15 hp) Purchase price net: €30,000 plus applicable VAT. VAT will be shown separately on our invoice. Dwjdpfx Adjz Ippxjiod Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing available Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. Djde Adfddepfx Adijwd • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: excellent (used), Catalog number: 8120 TECHNICAL DATA - Length of workpiece: 2600mm - Width of workpiece: 800mm - Main motor: 4kW Djdpfxjz Nhv Ij Adiswd - Width of sanding belt: 160mm - Fan - 2 types of rotational speeds + clockwise/counterclockwise - Diameter of dust extraction nozzle: 2x120mm - Overall dimensions (L/W/H): 3700x1250x1500mm - Weight: approximately 800kg ADVANTAGES – Polish-made – With fan – DTR documentation – Unpainted – Used sander, very good condition Net price: 5900 PLN Net price: 1372 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2004, Wide-belt sanding machine Manufacturer: SCM Type: Sandya 5 Year of manufacture: 2004 Technical data Working width: 1,100 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 170 mm Dedpfo Aigl Hex Adiewd Minimum workpiece length: 370 mm Number of sanding units: 2 1st unit: Steel calibration roller 2nd unit: Rubber-coated contact roller Sanding belt dimensions: 1,115 x 1,900 mm Main motor power: 15 kW Feed rate: 4.5 / 9 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Dwsdpfx Asz S Eidodisd Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. Dedpfx Ajz Rzyvodijwd For sale due to new acquisition.

Condition: used, Year of construction: 2000, Wide belt sanding machine Manufacturer: Ferri Claudio Type: ECO 1A 1100 Year of manufacture: 2000 Technical data Working width: approx. 1100 mm Dedpfx Adj Aigmgoiewd Connection: 400 V / 50 Hz Installed power: 24 kW Weight: approx. 1000 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Dwodpszxyfhjfx Adiod Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, This second-hand Schneider PS-type profile belt sander is designed for machining wood using profile steel. Djdpfxs Aigcae Adiewd The profile is transferred to the wood by a grinding belt running along the profile steel. Technical data: - Motor: 1.8 kW - Voltage: 3,880 V

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units Dsdpezw Dchefx Adijwd - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Dedpfo Afunhsx Adijwd Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: excellent (used), Year of construction: 1983, Wide belt sanding machine Dsdpfxs Ahgxre Adijwd Manufacturer: Bütfering Type: C55 2550 Year of manufacture: 1983 Belt speed continuously adjustable via a frequency converter Table: 2,550 x 950 mm Stroke: 400 mm Belt dimensions: 7,100 x 150 mm Sanding motor power: 4 kW Fan motor power: 2.2 kW

Condition: used, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Year of manufacture: 1996 Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes Dodjwnh Eqepfx Adiewd - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Location: Nattheim Djdpfxj Aif E Do Adiewd

Condition: excellent (used), Catalog number: 7431 TECHNICAL DATA - Maximum width of the workpiece: 950 mm - Maximum height of the workpiece: 150 mm From above: - Metal roller, pressure roller - Unit (grooved rubber roller for calibrating + shoe + metal roller) - Metal roller, smooth, sliding From below: - Traction belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed settings - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Operating pressure: 8 bar Djdpfezw Dibjx Adiswd - Diameter of the dust extraction port: 150 mm - Dimensions (L/W/H): 1600x1250x2000 mm - Weight: 1109 kg ADVANTAGES - German made - Additional shoe included - Used machine, very good condition Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1986, Langzauner LZG-K belt grinding machine Motor power 3 kW Table size 2500 x 800 mm Belt length 6800 mm Belt width 150 mm Belt speed 19 m/sec Column overhang 680 mm Column overhang height 280 mm Table height adjustment range 240 mm Footprint 3900 x 1400 mm Weight 300 kg Year of manufacture 1986 Dsdpfxe Ahy Aue Adiewd

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW. Dwjdoznvp Iepfx Adisd

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Dedpfezx R Dnox Adijwd Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: used, Year of construction: 1988, Grinding machine Manufacturer: Johannsen Type: T 84 Year of manufacture: 1988 Technical data Dodpfxe Aigl Rj Adiowd Table length: 2,700 mm Table width: 800 mm Grinding belt length: 7,100 mm Grinding belt width: 150 mm Motor power: 4 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), CATALOGUE NUMBER 7773 TECHNICAL SPECIFICATIONS - max. width of workpiece: 900mm - max. height of workpiece: 160mm – Top: - metal, sliding roller I unit – ribbed rubber roller for calibrating II unit – 2x metal roller for calibrating + shoe – Bottom: - conveyor belt - pneumatic belt oscillation - electric table lifting - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6-8bar - diameter of extraction nozzle: 2x200mm - dimensions (L/W/H): 1850x1950x2040mm - weight: approx. 3000kg Dsdpeztw D Dofx Adiswd ADVANTAGES – Made in Italy – Calibrating grinder + shoe – Used grinder, very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, PRIMO - 1100 for sale CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Combined unit: contact roller and pneumatic sanding pad Belt drive motor power: 9 kW Contact roller pressure adjustable in steps according to grit scale Infeed table with roller support and large, fold-down outfeed table Working width: 1100 mm Feed rate: 3 - 15 m/min, continuously adjustable Automatic workpiece thickness adjustment ENORMATIC quick adjustment First delivery: 2000 Very few operating hours Dwjdps Airt Hofx Adied Machine has been WORKSHOP OVERHAULED and is in TOP CONDITION Available from stock in Lieboch