Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Cjdpez Ngk Rjfx Abrohd

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Csdpjzxqapefx Abrshd

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Chjdpsugvxxefx Abrod Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface mechanical oscillation adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts Chsdpfxjy N Ry Hj Abrsd total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Mobile construction CE marking External dimensions: 2300x1200x1600

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Csdpfxevvkipj Abrjhd

Condition: excellent (used), CATALOGUE NUMBER 8128 Technical specifications: - Length of workpiece: 2600 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 170 mm - Fan - 2 speed settings + clockwise/counterclockwise rotation - Diameter of dust extraction port: 120 mm - Overall dimensions (L/W/H): 3650x1330x1500 mm - Weight: approximately 800 kg Chsdpfx Ae Aac Eqobrsd ADVANTAGES – Polish production – With fan – DTR documentation included – Unpainted – Used sander, very good condition Net price: 6200 PLN Net price: 1442 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece 200mm - max. height of workpiece 180mm - 2 grinding units: - top: metal roller + shoe + metal roller - bottom: metal roller + shoe + metal roller - top: - 2 feed rollers, rubber, pulling - grinding unit - 2 feed rollers, rubber, pulling - bottom: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW - 6 feed speed settings + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.75kW - main motors 2x4kW - diameter of dust extraction nozzles 80mm - overall dimensions L/W/H 1500x740x1600mm - weight 560kg ADVANTAGES - Made in Germany Cedpezxqrlsfx Abrohd - 2 units - Unpainted - DTR documentation - Used grinder, very good condition Net price: 10900 PLN Net price: 2530 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Code: 0509 Brand: SOCOMEC Model: LNE 210 - CE Standard Codpfxo Agb A Ij Abrehd Belt sanding machine for wood, furniture, steel, aluminium, metals, plastics, etc. – CE Standard Work surface dimensions 2100 x 700 mm Manual table lifting by handwheel Belt width 150 mm Belt length 5950 x 150 mm Pulley diameter 200 mm Three-phase motor 4 Hp Suction inlet diameter 120 mm Overall dimensions mm 3100 x 1300 x 1700 h Weight kg 340

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Working width 280 mm Cjdpfxjzynpko Abrjhd Working height 120 mm Arbor diameter 35 mm Table length 1100 mm

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 11068, total width: 230 mm, total height: 230 mm, total length: 320 mm, overall weight: 6,000 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, We offer this demonstration machine, Heesemann Type HSM .4 RQHD, manufactured in 2026. It is currently located in our showroom in AT-4894 Oberhofen am Irrsee. Machine Type: Type HSM .4 RQHD, ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S, Grinding width 1,350 mm Machine Number: 11068 Year of Manufacture: 2026 Machine Data: Multi-purpose surface grinding machine, Type HSM .4 RQHD ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S Grinding width 1,350 mm Frame construction with conveying table With continuous conveyor belt, feed rate 3 - 15 m/min, frequency-controlled, constant working height 880 mm, machine upper part adjustable (3 - 160 mm) depending on the workpiece thickness, integrated control cabinets. Cjdpfx Abe Aft Rbsrohd Pressure roller (Ø 50 mm), pivoting, in the machine infeed, incl. oversize control Workpiece suction system with variable vacuum (controlled via vacuum sensor) for the safe transport of workpieces shorter than 500 mm in the feed direction, integrated fan with frequency inverter, drive power 4 kW Automatic workpiece thickness measurement in the infeed Non-driven rollers (in the machine infeed and outfeed) Fold-down table in the machine outfeed, with wooden plate Industrial PC 15.6" Program memory for 1,000 programs Program for remote maintenance Program for dust extraction flap control MMI package consisting of: Intuitive machine operation with self-explanatory symbols LED strips in the outfeed and infeed as operator assistance for the workpiece (Infeed workpiece positioning for better grinding belt utilization, outfeed displays workpiece position) Display of belt manager status on the unit (screen) Unit information with grit size (screen) Visualization of the workpiece position during passage through the machine 1 Contact roller unit with steel roller Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 Transverse grinding unit Grinding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency inverter 1 Longitudinal grinding unit with pressure fin belt system Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 16 m/s Drive power: 15 kW Frequency inverter 2 Pressure bar with computer-controlled selective pressure control system CSD® (10 years warranty) 1 Rotating disc brush unit DB-S 10 driven disc brushes, working in 2 rotation directions, central height adjustment for abrasive wear, incl. quick-change device for disc brushes Brush covering: Flex-Trim K220 (1 set) Diameter: 150 mm 1 additional set (10 pcs.) of discs with stranded wire covering (0.25 mm) Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply Energy Management System EMS Belt support side: left Terminal: front left If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, Csdpfjzkvd Rox Abrshd electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Chjdpezbyt Ejfx Abred Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1973, machine/vehicle number: 6938, input voltage: 380 V, input frequency: 50 Hz, grinding belt length: 7,100 mm, We are offering this used Schmid KM wide belt grinding machine, manufactured in 1973, for sale. Type: KM Machine number: 6938 Cjdpfez Afbiex Abrjhd Year of manufacture: 1973 Operating voltage: 380 V Frequency: 50 Hz Grinding belt length: 7,100 mm We are offering the machine for a net price of 1,600 euros. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Catalog number 8047 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 160 mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation - stepless feed rate adjustment - electric machine body lifting - pneumatic brake - total power: 10.5 kW - operating pressure: 6-8 bar - diameter of dust extraction nozzle: 190 mm - dimensions (L/W/H): 1470x1540x2000 mm – weight: 1260 kg ADVANTAGES – Made in Germany – Single-head grinder with a 1100 mm wide shoe – Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.30 EUR Cjdszx Swpopfx Abrjhd (Prices may vary due to larger fluctuations)

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Abrasive belt width, 1st unit: 1115 mm Codpjz R Duvofx Abrjhd 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Control: Hand-operated control panel Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Motor power: 15 kW Dust extraction diameter: 2x160 mm Location:

Condition: used, Year of construction: 1999, Number of grinding stations: 1 Maximum workpiece cross-section: 390 x 390 mm Grinding belt dimensions: 400 x 1800 mm Length: 1150 mm Width: 1120 mm Weight: approx. 1020 kg Dust extraction connection diameter: 2 x 150 mm Roller conveyor: 3300 mm Chjdpszxqflefx Abrjd Location: Supplier

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW Cjdpfxjy N N Nts Abrshd - 400 V - Year: 2002

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Chjdsw Iqvqspfx Abred Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Manufacturer: Johannsen Model: Wide belt sanding machine Year of manufacture: 1996 Chjdozzlvwspfx Abrsd If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment Codpjy N N N Hsfx Abrshd - Capability to grind curved elements - Manual table height adjustment - Motor: 3.4 kW - 380 V - Year: 1992

Condition: excellent (used), Wide belt sanding machine HOUFEK Buldog 5 SPB 1100 - used - Combination unit with contact roller and sanding platen, Contact roller made of steel, Pneumatic activation of the contact roller, Digital display for sanding height, Automatic thickness adjustment, Stepless feed rate, Automatic carpet centering, Sanding belt oscillation ----- Technical data ----- Working width: 1100 mm, Number of belts: 1 piece, Sanding belt size: 1120 x 2200 mm, Sanding belt speed: 3--24 m/s, Feed rate: 3--15 m/min., Max. workpiece thickness: 160 mm, Min. workpiece thickness: 3 mm, Dust extraction port Ø: 140 / 140 mm, Dimensions (L x W x H): 1800 x 1800 x 2350 mm, Weight: 1390 kg Chjdpfxjz E Rz Re Abrsd Quality information: - Belt run / imbalance checked - Sanding platen checked / refurbished - Height adjustment checked - Complete basic cleaning - Immediately ready for use

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Cjdpfxsyy Nnks Abrohd Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: excellent (used), KÜNDIG BASIQ Cods Agm H Ispfx Abrehd Single-sided edge sanding machines 1 single-sided sanding unit, standard configuration for sanding solid wood edges, oscillating, manually adjustable in height, tiltable Sanding belt width up to 200 mm Drive motor 2.2 kW

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm Chedpfx Aozuzbcsbrjd - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, For sale is a wide-belt sanding machine from Hans Johannsen, with a table size of approximately 2600x900mm. Machine footprint: Length approximately 3800mm Width approximately 2000mm The wide-belt sanding machine is functional and in used condition, commensurate with its age. You are welcome to inspect it. Transfer in as-is condition, as inspected, without any warranty or guarantee. Cjds Ad Rhuepfx Abrshd Available for pickup in 41334 Nettetal.