Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Fodps Aitdhsfx Aanspp Location: Supplier

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA Fpsdpfxsztambe Aansp max. width of the processed workpiece: 1100mm max. height of the processed workpiece: 160mm 2 processing units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding processing units cleaning brush – from below pulling belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types 1.1kW motor: 15kW with pneumatic brake additional pneumatic shoe working pressure: 6-8bar diameter of extraction nozzle: 2x160mm, 1x120mm overall dimensions L/W/H: 2700x2100x2200mm weight approx.: 3000kg – German production – 2 processing units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32900 PLN Net price: 7650 EUR, depending on an exchange rate of 4.3 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Fpedsztxpnspfx Aanep Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: excellent (used), CATALOGUE NUMBER 7773 TECHNICAL SPECIFICATIONS - max. width of workpiece: 900mm - max. height of workpiece: 160mm – Top: - metal, sliding roller I unit – ribbed rubber roller for calibrating II unit – 2x metal roller for calibrating + shoe – Bottom: - conveyor belt - pneumatic belt oscillation - electric table lifting Fsdpfx Aasztw D Djnjpp - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6-8bar - diameter of extraction nozzle: 2x200mm - dimensions (L/W/H): 1850x1950x2040mm - weight: approx. 3000kg ADVANTAGES – Made in Italy – Calibrating grinder + shoe – Used grinder, very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, This second-hand Schneider PS-type profile belt sander is designed for machining wood using profile steel. The profile is transferred to the wood by a grinding belt running along the profile steel. Technical data: - Motor: 1.8 kW Fpodpfx As Aigcaoanop - Voltage: 3,880 V

Condition: used, Year of construction: 2004, Wide-belt sanding machine Manufacturer: SCM Type: Sandya 5 Year of manufacture: 2004 Technical data Working width: 1,100 mm Min. workpiece thickness: 3 mm Fpjdpfxs Aigl Ho Aanop Max. workpiece thickness: 170 mm Minimum workpiece length: 370 mm Number of sanding units: 2 1st unit: Steel calibration roller 2nd unit: Rubber-coated contact roller Sanding belt dimensions: 1,115 x 1,900 mm Main motor power: 15 kW Feed rate: 4.5 / 9 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Fodpfx Ajzz Nmmoanepp

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1287, Two-head profiling machine, Cheyenne SP2 600, manufactured in 2024. Connection: 3 x 400 V, CE version. Dimensions: approximately 1300 x 1300 x 1600 mm (H), weight: approximately 580 kg. Maximum workpiece width: 600 mm, maximum thickness: 300 mm, minimum length: 300 mm. 2 brushes (maximum diameter 200 mm), 2 pressure rollers per unit, 2 extraction hoods with a diameter of 150 mm per brush. Adjustable feed rate: 3 - 12 m/min, fixed brush speed: 915 rpm, manual brush adjustment with handwheel and mechanical measuring rod. Motor power: 4 kW. Fjdpfxjz Ngkks Aanepp

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of workpiece 970 mm - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake Fodpfezxg H Sjx Aanopp * from above: - metal roller, sliding - pressure roller - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW Fjdps Ahgkdsfx Aanopp - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, sliding unit metal roller, sliding Fedpfxjzty Rto Aanopp unit with shoe metal output roller, sliding – from below: traction belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11 kW with pneumatic brake operating pressure 6-8 bar diameter of the extraction nozzle 2x150 mm overall dimensions L/W/H 1960x1700x2000 mm weight approx. 2000 kg – manufactured in Germany – 2 units – unpainted – used sanding machine, very good condition Net price: 31900 PLN Net price: 7420 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2000, Wide belt sanding machine Manufacturer: Ferri Claudio Type: ECO 1A 1100 Year of manufacture: 2000 Technical data Working width: approx. 1100 mm Connection: 400 V / 50 Hz Installed power: 24 kW Fodpfo Aigmgex Aanjpp Weight: approx. 1000 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Fpjdez Ngk Repfx Aanep

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Fjdpfsxivbmox Aanjpp

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. Fedjy Uahwjpfx Aanjpp The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture.

Condition: new, Year of construction: 2026, Combined brushing, polishing, and belt sanding machine – conventional, semi-automatic, or CNC-controlled. A universal machine for processing plates, panels, profiles, and structures up to 650 mm in height by brushing, polishing, and sanding with a long belt or a brush. Work table size available from 2,500 mm x 1,000 mm (optional 3,000 mm x 1,250 mm) to 5,900 x 1,300 mm. Dimensions of the brushing or polishing disc: Ø 250 mm x width 200 mm. Sanding belt dimensions: 8,200 mm x width 150 mm (depending on the size, up to 14,500 x 150). Drive power of the brushing and polishing unit: 3 kW. Sanding belt drive: 3 kW. Weight: approximately 900 kg. We also supply the machines with 2 workstations / two sanding belts – for example, with 1 workstation for manual operation and an opposing workstation for manual and automatic operation. The work table is moved to the respective workstation on linear guides. Fsdpfx Ao Ai Ealoanepp

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump Fpedpfx Aajugvxxjnop - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW Fjdpjz Tflnefx Aanspp - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 Fodpfxszbyt Es Aanepp With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Catalog number 8047 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 160 mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt Fsdpfezx Swpjx Aanspp - sliding rubber roller - pneumatic belt oscillation - stepless feed rate adjustment - electric machine body lifting - pneumatic brake - total power: 10.5 kW - operating pressure: 6-8 bar - diameter of dust extraction nozzle: 190 mm - dimensions (L/W/H): 1470x1540x2000 mm – weight: 1260 kg ADVANTAGES – Made in Germany – Single-head grinder with a 1100 mm wide shoe – Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical specifications: - max width of the workpiece 900mm - max height of the workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - slipping rubber roller I unit - 2 x slipping rubber rollers II unit - slipping rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - operating pressure 6-8 bar - diameter of the dust extraction port 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Fpjdpfx Aaezx Rzysnjp Advantages: – Italian-made, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6720 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, PRIMO - 1100 for sale CONSTANT TABLE MACHINE / automatic head positioning Fsdpfs Airt Hjx Aanopp Wide-belt calibrating and fine-finishing machine Combined unit: contact roller and pneumatic sanding pad Belt drive motor power: 9 kW Contact roller pressure adjustable in steps according to grit scale Infeed table with roller support and large, fold-down outfeed table Working width: 1100 mm Feed rate: 3 - 15 m/min, continuously adjustable Automatic workpiece thickness adjustment ENORMATIC quick adjustment First delivery: 2000 Very few operating hours Machine has been WORKSHOP OVERHAULED and is in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Fjdpfezxqapjx Aanepp

Condition: used, Year of construction: 1973, machine/vehicle number: 6938, input voltage: 380 V, input frequency: 50 Hz, grinding belt length: 7,100 mm, We are offering this used Schmid KM wide belt grinding machine, manufactured in 1973, for sale. Type: KM Machine number: 6938 Year of manufacture: 1973 Fjdpfx Ajz Afbioanspp Operating voltage: 380 V Frequency: 50 Hz Grinding belt length: 7,100 mm We are offering the machine for a net price of 1,600 euros. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOGUE NUMBER: 6985 TECHNICAL DATA - Maximum width of the workpiece: 300mm - Height of the workpiece: 200mm - Unit: grooved rubber roller + shoe + metal roller - Work table: 1230x440mm - Belt: 300x1900mm Top: - Slip roller, rubber - Unit approximately 7.5kW - Slip roller, rubber Bottom: - Pulling belt Fodpfx Aaszw Dvbenepp - Pneumatic oscillation - 2 feed speed settings - Feed motor: 0.85kW - Diameter of dust extraction port: 110mm - Dimensions (L/W/H): 1250/1000/1950mm - Weight: 530kg - Unpainted - Used grinder - Very good condition Net price: 13900 PLN Net price: 3230 EUR Net price calculated using an exchange rate of 4.3 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)