Condition: excellent (used), Year of construction: 1994, Wide belt sander Manufacturer: Bütfering Type: AWS 2 KC 1100 Fpjdpfx Aevuza Neanop Year of manufacture: 1994 Working width: 1,100 mm Max. passage height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding shoe power: 11 kW Feed power: 1.5 kW Feed: 3 - 15 m/min, continuously adjustable Weight: approx. 3,300 kg Dimensions: 1,750 x 2,210 x 2,280 mm

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Fedpfx Ajzxqapsanepp

Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Fpodpfx Aae Aitdhsnep Location: Supplier

Condition: used, This second-hand Schneider PS-type profile belt sander is designed for machining wood using profile steel. Fpsdpfx Ae Aigcaeanop The profile is transferred to the wood by a grinding belt running along the profile steel. Technical data: - Motor: 1.8 kW - Voltage: 3,880 V

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. Fpodpozxyfhofx Aansp The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Abrasive belt width, 1st unit: 1115 mm 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Control: Hand-operated control panel Fedpfx Aez R Duvjanspp Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Motor power: 15 kW Dust extraction diameter: 2x160 mm Location:

Condition: used, Year of construction: 2004, Wide-belt sanding machine Manufacturer: SCM Type: Sandya 5 Year of manufacture: 2004 Technical data Working width: 1,100 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 170 mm Minimum workpiece length: 370 mm Number of sanding units: 2 1st unit: Steel calibration roller Fpodpfo Aigl Hox Aansp 2nd unit: Rubber-coated contact roller Sanding belt dimensions: 1,115 x 1,900 mm Main motor power: 15 kW Feed rate: 4.5 / 9 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller Fedpfe Af Uubsx Aanepp 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface mechanical oscillation Fedpoy N Ry Hofx Aanepp adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Mobile construction CE marking External dimensions: 2300x1200x1600

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg Fpedpfs Ahgkdox Aanep

Condition: used, For sale is a wide-belt sanding machine from Hans Johannsen, with a table size of approximately 2600x900mm. Machine footprint: Length approximately 3800mm Width approximately 2000mm The wide-belt sanding machine is functional and in used condition, commensurate with its age. You are welcome to inspect it. Transfer in as-is condition, as inspected, Fpedpfx Aj Ad Rhusanep without any warranty or guarantee. Available for pickup in 41334 Nettetal.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: Fpjdpfe Adfddox Aansp • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm Fpjdpfx Ajz Rmxdeansp - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Fpjdpoznvp Ijfx Aanep Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. Fjdpfxey Uahwo Aanspp The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture.

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm Fjdpfx Aaezw Dchonepp - weight: approx. 1305 kg - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment - Motor: 3.4 kW Fpsdpfx Ajy N N N Heanep - 380 V - Year: 1992

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, Fjdpfezkvd Rex Aanjpp infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: used, Technical specifications: Fpjdpfx Aaoziawfonop 1. Grinding unit: 650 Motor power: 11 kW Belt speed: 19 m/s Rubber and grooved contact rollers: 80 Shore 2. Grinding unit: Motor power: 7.5 kW Belt speed: 14 m/s Rubber and grooved contact rollers: 80 Shore Feed motor power: 1.5 kW Height adjustment motor: 0.37 kW Working pressure: 0.6 - 0.8 MPa Suction air capacity: 4500 m3/hour Max. working width: 650 mm Min./max. pass height: 2 - 160 mm Length of workpiece: 420 mm Sanding belt dimensions: 680 x 1900 mm Feed speed: 6 - 30 m/min Machine dimensions: Width: 1365 mm Depth: 1900 mm Height: 2010 mm

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Fpedpfoxivbmex Aansp

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm Fpodsy N N Ntspfx Aanep - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V - Year: 2002

Condition: excellent (used), Catalog number: 7431 TECHNICAL DATA - Maximum width of the workpiece: 950 mm - Maximum height of the workpiece: 150 mm From above: - Metal roller, pressure roller - Unit (grooved rubber roller for calibrating + shoe + metal roller) - Metal roller, smooth, sliding From below: - Traction belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed settings - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Operating pressure: 8 bar - Diameter of the dust extraction port: 150 mm - Dimensions (L/W/H): 1600x1250x2000 mm - Weight: 1109 kg ADVANTAGES - German made - Additional shoe included Fpodpozw Dibofx Aanjp - Used machine, very good condition Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2000, Wide belt sanding machine Manufacturer: Ferri Claudio Type: ECO 1A 1100 Year of manufacture: 2000 Fodpfe Aigmgsx Aanjpp Technical data Working width: approx. 1100 mm Connection: 400 V / 50 Hz Installed power: 24 kW Weight: approx. 1000 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Fedpfxozznh Ns Aanspp Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Manufacturer: Johannsen Model: Wide belt sanding machine Fpedpozzlvwsfx Aanjp Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.