Condition: excellent (used), Year of construction: 2022, Specification: Feed Speed: 2.5-13m/min Workpiece Thickness: 3-160mm Working Width: 1100mm Workpiece Recognition 35 Infeed Roller Table with 2 Rubber Rollers Outfeed Table with 2 Rubber Rollers Contact Roller for Workpiece Calibration Steel Contact Roller 140mm dia Pressure Element Infront and Behind Unit Dwodpfx Aij Air A Dszjd Blow Off Device Pressure Pad system EPS 35 for Fine Sanding Rubberised Contact Roller Pressure Element Behind Unit Brush Cleaning Unit Operator Control unit 15.6” 400V 50Hz CE

Condition: used, Year of construction: 2008, working width: 1,350 mm, power: 85 kW (115.57 HP), roller diameter: 250 mm, TECHNICAL DETAILS Working width: max. 1,350 mm Number of processing units: 4 Feed motor power: 5.5 kW Sanding unit 1 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 2 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 3 Roller diameter: 250 mm Motor power: 15 kW Speed: 2,905 rpm Sanding belt width: approx. 1,350 mm Dwodpfx Ae Aihpajizsd Sanding unit 4 Roller diameter: 320 mm Motor power: 15 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm MACHINE DETAILS Installed total power: 85 kW EQUIPMENT Calibrating, sanding, and finishing machine Work table with fixed height for line operation NC-controlled feed speed regulation Sanding unit with steel roller Sanding units with rubber rollers Touchscreen control CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8401

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Dwsdpfx Aiszd Uzhezjd Year - 2016 CE.

Condition: used, Year of construction: 2011, Number of units: 2 R = Calibrating unit with a profiled steel contact roller (160 mm diameter) C = Combination unit with a profiled, rubber-coated contact roller, 65° Shore (160 mm diameter), and an electronic segmented pressure bar with a 35 mm segment width. Working width: 1100 mm Sanding belt width: 1120 mm Sanding belt length: 1900 mm Workpiece thickness: 3 - 160 mm Dwedpfxo Aitc Ij Aized Drive motors: 1st unit: 15 kW 2nd unit: 11 kW Cutting speed: 21 / 12 m/s Feed motor: 1.1 kW Feed speed: 2.5 - 13 m/min Compressed air: 6 bar Compressed air consumption: max. 20 l/min Belt blowing device: 440 l/min per device Extraction capacity: approx. 2880 m³/h Air velocity: 20 m/sec Dimensions: 1850 x 1700 x 1900 mm Total connected load: 28 kW Weight: 1800 kg Storage location: Supplier

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Dodpszd Uzzefx Aizswd Main engine power: 7.5 kW Power: 400V Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 26695, type of input current: AC, overall weight: 415 kg, conveyor belt speed: 14,000 mm/s, height adjustment type: electric, input voltage: 400 V, grinding belt length: 2,600 mm, grinding belt width: 200 mm, input frequency: 50 Hz, Wegoma KS 2600 FU Edge Grinding Machine – Year of Manufacture 2012 For sale is a Wegoma KS 2600 FU veneer and solid wood edge grinding machine, manufactured in 2012. This machine is ideally suited for grinding veneer edges and solid wood edges, as well as for other grinding applications in professional carpentry and joinery workshops. The long grinding belt, with a length of 2,600 mm and a width of 200 mm, allows for comfortable and uniform processing of workpieces. The machine features a sturdy work table and a robust construction. The belt speed is 14 m/s. An integrated extraction system, in conjunction with a suitable extraction unit, ensures efficient dust extraction. In addition, an Eumacop EVS 48 infeed device from 2014 is mounted. This enables a uniform and controlled workpiece feed and simplifies processing during repetitive grinding operations. Technical data: - Manufacturer: Wegoma - Model: KS 2600 FU - Machine type: Veneer and solid wood edge grinding machine - Year of manufacture: 2012 - Grinding belt dimensions: 2,600 x 200 mm - Belt speed: 14 m/s - Electrical connection: 400 V - Grinding belt motor power: 2.25 kW - Auxiliary motor: 0.35 kW - Rated current: 6.0 A - Weight: approx. 415 kg Additional equipment: - Eumacop EVS 48 infeed device, year of manufacture 2014 - Dust extraction connection - Sturdy work table - Grinding belt guide with adjustable stops Inspection and test run: The machine can be inspected and tested at our location in Luxembourg by prior appointment. This gives you the opportunity to personally verify the function and condition of the machine before purchasing. Invoice and delivery: - Invoice from Luxembourg Dsdpfx Aio Ahd Thszewd - Intra-Community supply to other EU member states to eligible companies, under the legal conditions, with 0% Luxembourg VAT is possible - Loading and transport by arrangement If you are interested or have any questions about the machine, please do not hesitate to contact us. An inspection with a test run is possible at any time by prior arrangement.

Condition: excellent (used), Year of construction: 2002, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: A20430 RC1, feed rate Y-axis: 512 m/min, total width: 2,480 mm, total height: 2,500 mm, total length: 3,660 mm, working width: 1,650 mm, grinding width: 1,650 mm, grinding height: 200 mm, working height: 200 mm, table height: 780 mm, height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 75 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 200 mm, table length: 3,400 mm, table width: 1,650 mm, input frequency: 50 Hz, input voltage: 380 V, workpiece width (max.): 1,800 mm, Calibrating machine with integrated PC-based adjustment and color touch screen. Two rubber rollers plus a third buffer roller. Used machine, operated on a non-intensive cycle, solely for sanding spruce (soundboards for pianos, harps, and other small musical instruments). On average, it has been used for 5-6 hours/week – 230 hours/year. Feed conveyor belt in perfect condition (replaced). Operating and maintenance manuals AVAILABLE. Dsdpfx Aij Aduanozewd

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: max. 80 mm Workpiece thickness: min. 3 mm Drive power: 2.5 kW Feed rate: 4.5–22 m/min Feed rate control: stepless Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between guide rollers: 40 mm Dwjdpfxo Ah Rt Hj Aizjd Workpiece vacuum clamping system Fan power: 5.5 kW Operating side: left Operator terminal: graphical Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm Weight: approx. 4,200 kg EQUIPMENT Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding Transport table with individual conveyor belts Refurbished conveyor belt Steplessly adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Stepless electronic sanding belt speed control via frequency inverter Wear-free braking system Pneumatic sanding belt tensioning Intermittent belt dust extraction system Infrared belt control Graphical operator terminal for entering machine setting values Numerical thickness adjustment Fault source display Workpiece throughput display Feed rate display Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape Workpiece vacuum clamping system with fan

Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Dwjdpfx Ae Aitdhjizod Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Location: Supplier

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Dwodpfx Aj Ah Rxcoizjd Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. Dwodpfxjz S Ufbe Aizjd The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding capability. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, with edge segments that can be switched on and off. Segment width of the pressure bar: 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency converter from 2 - 18 m/s. Belt feed speed steplessly adjustable via frequency converter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension: 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outfeed table. Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200mm, 1 x 140mm, and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar contact points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connecting cable. Original paint, only spot-repaired in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier". Dwsdpozqvmrjfx Aizod

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Dedpfx Aiszx Tgrozewd Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with grooved stop guide (for veneer overhang). Veneer sanding attachment with fine adjustment, foldable. Spring-loaded table, height adjustable and can be positioned laterally. Angle stop. Rear, inclinable work table for sanding solid wood. Both tables are height adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Side extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable chassis, 2 swivel casters, 2 steering casters and lever brake for locking. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller". Dwedpjz I T Apjfx Aizsd

Condition: used, PRIMO - 1100 for sale CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Combined unit: contact roller and pneumatic sanding pad Dodpfxj Airt Hs Aizjwd Belt drive motor power: 9 kW Contact roller pressure adjustable in steps according to grit scale Infeed table with roller support and large, fold-down outfeed table Working width: 1100 mm Feed rate: 3 - 15 m/min, continuously adjustable Automatic workpiece thickness adjustment ENORMATIC quick adjustment First delivery: 2000 Very few operating hours Machine has been WORKSHOP OVERHAULED and is in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), Year of construction: 2002, power: 11.03 kW (15.00 HP), workpiece height (max.): 170 mm, input voltage: 400 V, workpiece width (max.): 950 mm, Wide belt sander SCM Sandya 3 RTC wide-belt sander. A reliable and easy-to-use wide-belt sander. Equipped with 2 sanding belts, a combination unit, a roller, and a sanding pad. ✔ Compact & efficient – ​​Takes up minimal space while delivering maximum results. ✔ User-friendly – ​​Clear control panel on the front for smooth operation. ✔ Versatile sanding – Perfect for sheet materials, solid wood, veneer, and much more. Working width: 950 mm Working height: 4–170 mm Sanding belt width: 970 mm Dwodpfx Aio Ah Txaozod Main motor: 15 hp with automatic star-delta (Y/Δ) starter 2 feed speeds: 4.5/9 m/min Automatic centering of the feed belt Automatic setting of processing thickness with digital readout Calibrated and in perfect working order. Transport throughout Europe can be arranged at a good price.

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Djdpfs Agbi Dox Aizewd Overall width 2210 mm.

Condition: used, Year of construction: 2017, Calibration grinding machine Manufacturer: Viet Type: S1 213 2200 RKRT Dwsdpfxj Ahg Rks Aizsd Year of manufacture: 2017 Technical data - Grinding width: 1300 mm - 1x Calibration grinding unit - 1x Combination grinding unit - Feed rate: 10 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: Dodpj Aazaaefx Aizowd - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece 200mm - max. height of workpiece 180mm - 2 grinding units: - top: metal roller + shoe + metal roller - bottom: metal roller + shoe + metal roller - top: - 2 feed rollers, rubber, pulling - grinding unit - 2 feed rollers, rubber, pulling - bottom: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW - 6 feed speed settings + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.75kW - main motors 2x4kW - diameter of dust extraction nozzles 80mm - overall dimensions L/W/H 1500x740x1600mm - weight 560kg Dodpfx Aszxqrleizowd ADVANTAGES - Made in Germany - 2 units - Unpainted - DTR documentation - Used grinder, very good condition Net price: 10900 PLN Net price: 2530 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1999, High-quality veneer cutter with a maximum processing length of 3600 mm. Dodpfx As Ahgaioizowd Features a programmable width stop. Includes a spare blade.

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm * Feed speed: 4–20 m/min * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW Dwedpfx Ajzgbxfsizjd * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel * CE compliant Machine suitable for professional woodworking and panel processing applications.

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Djdpfs Aayf Usx Aizowd Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Equipped with an AL-KO dust extraction system (excluding filters)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Dedpfx Aiownr A Hjzewd Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Dsdpfsy H Itfex Aizjwd Handwheel rise and fall to worktable Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor