Condition: excellent (used), Year of construction: 2022, Specification: Feed Speed: 2.5-13m/min Workpiece Thickness: 3-160mm Working Width: 1100mm Workpiece Recognition 35 Infeed Roller Table with 2 Rubber Rollers Outfeed Table with 2 Rubber Rollers Contact Roller for Workpiece Calibration Steel Contact Roller 140mm dia Pressure Element Infront and Behind Unit Blow Off Device Pressure Pad system EPS 35 for Fine Sanding Rubberised Contact Roller Dwsdpfx Ao Air A Dsizsd Pressure Element Behind Unit Brush Cleaning Unit Operator Control unit 15.6” 400V 50Hz CE

Condition: used, Year of construction: 2008, working width: 1,350 mm, power: 85 kW (115.57 HP), roller diameter: 250 mm, TECHNICAL DETAILS Dwedo Aihpaepfx Aizsd Working width: max. 1,350 mm Number of processing units: 4 Feed motor power: 5.5 kW Sanding unit 1 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 2 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 3 Roller diameter: 250 mm Motor power: 15 kW Speed: 2,905 rpm Sanding belt width: approx. 1,350 mm Sanding unit 4 Roller diameter: 320 mm Motor power: 15 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm MACHINE DETAILS Installed total power: 85 kW EQUIPMENT Calibrating, sanding, and finishing machine Work table with fixed height for line operation NC-controlled feed speed regulation Sanding unit with steel roller Sanding units with rubber rollers Touchscreen control CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8401

Year of construction: 2021, condition: used, Offered is a lightly used edge sander with pneumatic belt tensioning. Operating pressure: 6bar, pressure limit: 7bar, tiltable sanding unit with angle scale, front worktable, additional table at the idler roller, dust extraction connection, compressed air filter regulator with pressure gauge, an operating manual and additional sanding belts included. Inspection possible by arrangement. Dwsdpj Aiu S Hofx Aized

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc Dedpozd Uzhofx Aizjwd 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Year - 2016 CE.

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: max. 80 mm Workpiece thickness: min. 3 mm Drive power: 2.5 kW Feed rate: 4.5–22 m/min Feed rate control: stepless Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between guide rollers: 40 mm Workpiece vacuum clamping system Fan power: 5.5 kW Operating side: left Operator terminal: graphical Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm Weight: approx. 4,200 kg Dwodps Ah Rt Hsfx Aized EQUIPMENT Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding Transport table with individual conveyor belts Refurbished conveyor belt Steplessly adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Stepless electronic sanding belt speed control via frequency inverter Wear-free braking system Pneumatic sanding belt tensioning Intermittent belt dust extraction system Infrared belt control Graphical operator terminal for entering machine setting values Numerical thickness adjustment Fault source display Workpiece throughput display Feed rate display Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape Workpiece vacuum clamping system with fan

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Djdpfs Ah Rxcex Aizowd Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Djdpfxszd Uzzo Aizjwd Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: used, Year of construction: 1992, functionality: fully functional, For sale is a used and robust wide-belt sanding machine from the reputable manufacturer Bütfering, model WAS 2 KC 1100, manufactured in 1992. The machine is ideal for carpentry shops, joineries, or wood processing companies looking for a reliable machine for precise sanding results. Dodpfx Aj Airfyjizowd Technical specifications: Manufacturer: Bütfering Model: AWS 2 KC 1100 Year of manufacture: 1992 Max. sanding width: 1,100 mm Max. sanding height: 160 mm

Condition: excellent (used), Year of construction: 2002, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: A20430 RC1, feed rate Y-axis: 512 m/min, total width: 2,480 mm, total height: 2,500 mm, total length: 3,660 mm, working width: 1,650 mm, grinding width: 1,650 mm, grinding height: 200 mm, working height: 200 mm, table height: 780 mm, height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 75 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 200 mm, table length: 3,400 mm, table width: 1,650 mm, input frequency: 50 Hz, input voltage: 380 V, workpiece width (max.): 1,800 mm, Calibrating machine with integrated PC-based adjustment and color touch screen. Two rubber rollers plus a third buffer roller. Used machine, operated on a non-intensive cycle, solely for sanding spruce (soundboards for pianos, harps, and other small musical instruments). On average, it has been used for 5-6 hours/week – 230 hours/year. Dede Aduanspfx Aizowd Feed conveyor belt in perfect condition (replaced). Operating and maintenance manuals AVAILABLE.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 26695, type of input current: AC, overall weight: 415 kg, conveyor belt speed: 14,000 mm/s, height adjustment type: electric, input voltage: 400 V, grinding belt length: 2,600 mm, grinding belt width: 200 mm, input frequency: 50 Hz, Wegoma KS 2600 FU Edge Grinding Machine – Year of Manufacture 2012 For sale is a Wegoma KS 2600 FU veneer and solid wood edge grinding machine, manufactured in 2012. This machine is ideally suited for grinding veneer edges and solid wood edges, as well as for other grinding applications in professional carpentry and joinery workshops. The long grinding belt, with a length of 2,600 mm and a width of 200 mm, allows for comfortable and uniform processing of workpieces. The machine features a sturdy work table and a robust construction. The belt speed is 14 m/s. An integrated extraction system, in conjunction with a suitable extraction unit, ensures efficient dust extraction. In addition, an Eumacop EVS 48 infeed device from 2014 is mounted. This enables a uniform and controlled workpiece feed and simplifies processing during repetitive grinding operations. Dwsdpfx Ais Ahd Thezod Technical data: - Manufacturer: Wegoma - Model: KS 2600 FU - Machine type: Veneer and solid wood edge grinding machine - Year of manufacture: 2012 - Grinding belt dimensions: 2,600 x 200 mm - Belt speed: 14 m/s - Electrical connection: 400 V - Grinding belt motor power: 2.25 kW - Auxiliary motor: 0.35 kW - Rated current: 6.0 A - Weight: approx. 415 kg Additional equipment: - Eumacop EVS 48 infeed device, year of manufacture 2014 - Dust extraction connection - Sturdy work table - Grinding belt guide with adjustable stops Inspection and test run: The machine can be inspected and tested at our location in Luxembourg by prior appointment. This gives you the opportunity to personally verify the function and condition of the machine before purchasing. Invoice and delivery: - Invoice from Luxembourg - Intra-Community supply to other EU member states to eligible companies, under the legal conditions, with 0% Luxembourg VAT is possible - Loading and transport by arrangement If you are interested or have any questions about the machine, please do not hesitate to contact us. An inspection with a test run is possible at any time by prior arrangement.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with combined unit and electronic segmented pressure beam, edge segments can be switched on and off. Segment width of the pressure beam 35 mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed frequency-controlled from 2 - 18 m/s. Belt feed infinitely variable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimension 1360 x 1900 mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and a connector for an optional blower is available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200 mm, 1 x 140 mm and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam application points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier". Dwjdpfx Aijzqvmrezjd

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, grinding width: 1,250 mm, grinding height: 160 mm, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, Working width 1250 mm. Longitudinal sanding belt length mm. 2620 Standard working thickness mm. 3÷160 3 units from the bottom 3 units from the topp First machine: 1st Bottom Working unit: C250 - Working unit with cylinder ø mm. 250 Motor with one speed of rotation, with power kW 37 Cutting speed of sanding belt m./sec. 30 Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90 Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 30 Cutting speed of sanding belt m./sec. 25 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 3rd Bottom Working unit: T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure Motor with one speed of rotation, with power kW 18 Cutting speed of sanding belt m./sec. 16 Second machine: 1st Top Working unit: C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit; Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt. Cylinder with steel surface and helicoidal grooves for cooling C-steel Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 37 Cutting speed of sanding belt m./sec. 30 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 2nd Top Working unit: C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit; Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt. Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90 Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 30 Cutting speed of sanding belt m./sec. 25 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 3rd Top Working unit: T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily interchangeable; depth of deployment mechanically adjustable Motor with one speed of rotation, with power kW 18 Cutting speed of sanding belt m./sec. 16 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood Djdpfx Ais Aiua Dszswd S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180 SR - Rotary blowers for blowing the dust. For technical specification please read included data sheet below. This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge-grinding machine with oscillation and 200mm grinding height. Langzauner LZK 4-S with a veneer edge-grinding side and a solid wood grinding side. 200mm grinding width Motorized belt oscillation, therefore no compressed air connection is required. Drive motor 400V / 3kW Front work table for grinding veneer edges, grooved with a stop guide (for veneer overhang). Veneer grinding attachment with fine adjustment, foldable. Spring-loaded table, height-adjustable and can be moved to the side. Angle stop. Rear, adjustable work table for grinding solid wood. Both tables are height-adjustable to make full use of the grinding belt. Belt dimensions 3000 x 200mm. Side extension table for radius grinding on the 150mm belt roller. Dsdez I T Apjpfx Aizswd Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable frame with 2 swivel casters, 2 steering casters, and a lever brake for locking. CE marking. All graphite pads and suction hoses have been renewed. Original paint, with only minor touch-ups in places. Excellent condition from a small restoration workshop. Some grinding belts are included. Dimensions approximately 1800 x 1000 x 1250mm (L x W x H). Weight approximately 650kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: used, Year of construction: 2011, Number of units: 2 R = Calibrating unit with a profiled steel contact roller (160 mm diameter) C = Combination unit with a profiled, rubber-coated contact roller, 65° Shore (160 mm diameter), and an electronic segmented pressure bar with a 35 mm segment width. Working width: 1100 mm Sanding belt width: 1120 mm Sanding belt length: 1900 mm Workpiece thickness: 3 - 160 mm Drive motors: 1st unit: 15 kW Dedps Aitc Iefx Aizjwd 2nd unit: 11 kW Cutting speed: 21 / 12 m/s Feed motor: 1.1 kW Feed speed: 2.5 - 13 m/min Compressed air: 6 bar Compressed air consumption: max. 20 l/min Belt blowing device: 440 l/min per device Extraction capacity: approx. 2880 m³/h Air velocity: 20 m/sec Dimensions: 1850 x 1700 x 1900 mm Total connected load: 28 kW Weight: 1800 kg Storage location: Supplier

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Dedpfx Aioz S Ufbszswd Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us. Dedszx Tgropfx Aizjwd

Condition: excellent (used), Year of construction: 2002, power: 11.03 kW (15.00 HP), workpiece height (max.): 170 mm, input voltage: 400 V, workpiece width (max.): 950 mm, Wide belt sander SCM Sandya 3 RTC wide-belt sander. A reliable and easy-to-use wide-belt sander. Equipped with 2 sanding belts, a combination unit, a roller, and a sanding pad. ✔ Compact & efficient – ​​Takes up minimal space while delivering maximum results. ✔ User-friendly – ​​Clear control panel on the front for smooth operation. ✔ Versatile sanding – Perfect for sheet materials, solid wood, veneer, and much more. Working width: 950 mm Working height: 4–170 mm Sanding belt width: 970 mm Djdpfj Ah Txajx Aizjwd Main motor: 15 hp with automatic star-delta (Y/Δ) starter 2 feed speeds: 4.5/9 m/min Automatic centering of the feed belt Automatic setting of processing thickness with digital readout Calibrated and in perfect working order. Transport throughout Europe can be arranged at a good price.

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Dwedpfxo Agbi Dj Aizsd

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece 200mm - max. height of workpiece 180mm - 2 grinding units: - top: metal roller + shoe + metal roller - bottom: metal roller + shoe + metal roller - top: - 2 feed rollers, rubber, pulling - grinding unit - 2 feed rollers, rubber, pulling - bottom: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW - 6 feed speed settings + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.75kW - main motors 2x4kW - diameter of dust extraction nozzles 80mm - overall dimensions L/W/H 1500x740x1600mm Dodezxqrlspfx Aizewd - weight 560kg ADVANTAGES - Made in Germany - 2 units - Unpainted - DTR documentation - Used grinder, very good condition Net price: 10900 PLN Net price: 2530 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 Dwedj Aazaaopfx Aizjd - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Calibration grinding machine Manufacturer: Viet Deds Ahg Rkspfx Aizjwd Type: S1 213 2200 RKRT Year of manufacture: 2017 Technical data - Grinding width: 1300 mm - 1x Calibration grinding unit - 1x Combination grinding unit - Feed rate: 10 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, 3-Belt sanding machine with lacquer finishing and brush unit. 1st roller (steel), 2nd combination unit, 3rd shoe. TECHNICAL DATA: Max. working width 1350 mm Max. workpiece thickness 160 mm Min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1380 mm Sanding belt speed 18 m/s Feed rate - infinitely variable 3 - 18 m/min Motor power sanding unit 15 kW Motor power thickness adjustment 0.55 kW Motor power feed conveyor 2.2 kW Motor power brush unit 5.5 kW Operating pressure 6 bar Djds Aitdhepfx Aizowd Air consumption 30 l/min Dust extraction port - sanding unit 3 x 150 mm Machine width 2060 mm Machine depth 2660 mm Machine height 2100 mm Weight approx. 4200 kg Standard equipment: 1. Sanding belt: Contact roller 200 mm diameter, steel roller with grit compensation. Automatic feed via programming. 2. Sanding belt: Combination sanding unit with contact roller 150 mm diameter, 85 Shore hardness, height-adjustable with grit compensation. Electronically controlled membrane sanding shoe, segment width 27 mm, with automatic engagement and disengagement for high-quality veneer fine sanding. 3. Sanding belt: Electronically controlled membrane sanding shoe, with automatic engagement and disengagement, segment width 27 mm, for high-quality veneer and lacquer intermediate sanding. Reading system for the electronic sanding shoes, optical and therefore absolutely contactless! Lacquer intermediate sanding device consisting of: VT 13 vacuum table with perforated surface and vacuum generator 3.0 kW, B2 additional sanding belt speed for lacquer intermediate sanding, 4.5 m/sec on the 3rd sanding belt, BA 13 belt brush, oscillating, and workpiece-dependent, on the 3rd sanding belt (additional dust extraction 2 x 120 mm diameter), OS 13 satinizing brush unit, oscillating for perfect surface finish (dust extraction port 120 mm diameter), STR 13 texturing unit with 5.5 kW motor including texturing brush, automatically adjustable, AT 13 outfeed roller table 400 mm Location: Supplier

Condition: good (used), Year of construction: 1999, High-quality veneer cutter with a maximum processing length of 3600 mm. Features a programmable width stop. Includes a spare blade. Dweds Ahgaijpfx Aizsd

Condition: used, Year of construction: 2001, Working width 1100 mm Number of sanding units 3 st. Used Machine Year of Manufacture: 2001 Condition: Refurbished by a Bütfering specialist Dwsdpozk Nm Sefx Aizod Features and Technical Specifications: Grinding width: 1100 mm Sanding belt length: 1,900 mm Workpiece thickness: 3–150 mm Feed speeds: continuously variable, 2.5–13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd grinding unit: 11 kW With table extension at the infeed With table extension at the outfeed Total power consumption: 43 kW Extraction capacity: approx. 6,750 m³/h Air velocity: 20 m/s Compressed air connection: 6–8 bar Air consumption: approx. 30 l/min Dimensions: 1,750 x 2,740 x 1,890 mm Weight: 3,100 kg Availability: available shortly Location: 65439 Flörsheim

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Dwodpfozgbxfex Aizod Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm * Feed speed: 4–20 m/min * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel * CE compliant Machine suitable for professional woodworking and panel processing applications.