Used Sawing and cutting for sale (153)

Year of construction: 1984, condition: excellent (used), An Edging Saw in very good condition Isdpfjhuiwxox Ag Njtn

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator Itodew Tkt Hjpfx Ag Non driven roller conveyor with pull-off device control system and electrical cabinet

Condition: reconditioned (used), • 150 mm cutting height Isdjw I Sg Depfx Ag Netn • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: ready for operation (used), Slab recovery line with below machines: Itedjgwqk Sepfx Ag Non One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: used, Chipper canter line IDC000094 - Soderhamn Eriksson/Kockum 240 12 2C - with 132 kW electric motors, pulling chain in the middle, outfeed pulling arms. - Soderhamn Eriksson/Kockum 240 12 2C - with 110 kW electric motor - - Outfeed with side falling ability Iedpfx Agoupt Tms Netn - Centering feed table with moving arms - Max. log diameter: 500 mm - Min gap between discs: 0 mm - each chipper canter weight: ~ 4000 kg

Condition: reconditioned (used), very robust resaw for sawmill use Isdpfoiiiamox Ag Notn available immediate guided sawblades on multi tooth shaft including casting device for blade guides several sawblades max cutting hight: 250 mm max cutting width: about 500 mm

Year of construction: 1999, condition: ready for operation (used), Linck EWD pre-cutting group consisting of: - Linck EV 40 infeed table, with 1x pair of turning rollers - EWD FZ 3 (mounted on PF19 frame with guide shafts DM 200mm) 2x drive motors with 75/45kW. 1 pair of pull-out rollers - Centering unit EVW - FR 14 side cutting saw with limit cutter 4 x 50KW + 2x 75kW - Side fabric separating transport - incl. hydraulic unit - without switch cabinets Machine is in very good condition! Iodpoufr Ndsfx Ag Notn System can also be overhauled and offered with a new control system!

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Iodpfx Asv I D Ezog Netn Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Iedpexfrmwefx Ag Nstn Line speed: 70-150 m/min Chip length: 20-30 mm

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Drive power: 4 x 132 kW Feed rate up to 150 m/min Ijdpfowww Iysx Ag Nstn

Condition: used, ARI Vislanda log edger - Manufacturer: ARI Vislanda Itjdpfx Astq Aczsg Nen - Model: KS12 - Sawblade diameter: 1000 - 1150 mm - Min. log length: 2,5 m - Max. Cutting height: 445 mm

Condition: used, Year of construction: 1987, No. 3186 Itsdpjvcqanefx Ag Nen Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2015, functionality: fully functional, Complete Fully Functional USTUNKARLI Sawmill. With Conveyors included. Price also includes installation in anywhere in Europe. Ijdpfx Ajxl Aahog Nstn

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Iodpfxoxcidnj Ag Netn

Condition: not inspected (used), WD FR8RM edging line - maximum length of wood 7000 mm - minimum timber length 1100 mm Itedjtwmlaepfx Ag Nsn - width of wood max 700 mm - maximum height of wood 100 mm - made in Germany TECHNICAL PARAMETERS: 1 cascade cross feeder - total length 7250 mm - total width 2100 mm - distance between chains 300 mm - five sections with chain - motor power 4 kW - six drop chains 2 cross feeder - total length 7000 mm - total width 2300 mm - feed motor power 0.75 kW - material levelling saw - power of saw engine 2.2 kW - blade diameter max 350 mm - cutting height 80 mm 3 centering roller table - total length 7000 mm - total width 160 mm - five bottom drawing rollers - roller diameter 160 mm - length 1000 mm - four hydraulic top presses - six material centering clamps - hydraulic feed 4 WD edging machine - motor power 55 kW - two moving sleeves - sleeves length 60 mm - max diameter of discs 400 mm - disc spacing hydraulic - four bottom pulling rollers - two top trailing rollers 5 drop receiving table - total length 7850 mm - total width 1200 mm - four top presses - 70 mm prism guide - hydraulic feed

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm Iedpfxewh U Dms Ag Netn  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Year of construction: 1982, condition: ready for operation (used), We offer you frame sawmills 1. frame sawmill Bogli 71 with feeding and auxiliary carriage and distribution device behind the sawmill Sawmill TYPE Bogli Marathon 71 Frame 710 mm, hydraulic sawmill Hydraulic adjustment of the saws, lifting and lowering of the roller 55 KW motor Itedpfx Agsn I Udxj Nen Carriage with auxiliary carriage, track spacing 90 cm Distributor behind the sawmill Everything as in the pictures nr 1, 2, 3, 4 Price is negotiable 2. creel Linck E 28-28 Frame stroke 600 mm Everything as on the pictures nr 5, 6, 7, 8 Price is negotiable 3. creel Linck with a loading wagon and a distribution device behind the sawmill. Trak Linck 71 - Frame width 710 mm - feed 12 m/min - Fully hydraulic: hydraulic shifting of the saws, lowering and lifting of the roller Linck hydraulic loader wagon with additional equipment. Distribution device behind the sawmill (bag, wedge) Everything as in the pictures nr 9, 10, 11, 12, 13 Price is negotiable

Condition: good (used), Year of construction: 1983, functionality: fully functional, cutting height (max.): 200 mm, rotational speed (max.): 580 rpm, roll width: 100 mm, roller diameter: 110 mm, Vertical trend and slitting band saw Manufactured by Raimann Type B 11 Year 1983 Roller diameter 110 mm Roller width 100 mm Speed -580 rpm Motor 18,5 Kw Itsdpov T R R Uofx Ag Nsn Cutting width R/L of blade-per.200 mm Cutting height 200 mm Feed stepless 10-40 m/min 1.5 kw Length of band saw blades 6300-6500 mm Electric motorized blade tensioning Pneumatic roller carriage adjustment

Condition: good (used), Year of construction: 1994, - quantity of knives 4 - lenght of knives 720 mm Iodpfx Agow U Diwe Nstn - diameter of drum 900 mm

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm Iodpfxsvw Rplj Ag Nstn -motor 30kW

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm Isdpfx Agemv Ehze Notn

Year of construction: 2005, condition: used, functionality: fully functional, – Polish production – DTR – Used machine, very good condition Itodswu U Ifopfx Ag Nsn TECHNICAL PARAMETERS: – max. processed log diameter: 320 mm – minimum processed log length: 1600 mm – number of spindles: 2 pcs – spindle diameter: 70 mm – spindle working length: 230 mm – saw blade diameter: 450 mm – main motor power: 75 kW – feed motor power: 2 x 2.2 kW – upper feed rollers motor power: 1.1 kW – side discharge feed rollers motor power: 2 x 1.1 kW – 2 geared feed rollers – infeed table length: 2100 mm – outfeed table length: 2600 mm – machine dimensions (L/W/H): 600 x 200 x 185 cm – weight: ~3800 kg

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm Ijdpfx Agsktg She Notn the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm Isdjmv Ekyopfx Ag Notn spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production Itedpji Ezwmefx Ag Nsn TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg