Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- She trumps herself with her strong equipmentbig in the smallest space.- The cutting quality and flexibility are outstandingin daily hnical specifications:Double trolley length 2000 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45° max. 72 mmmanual height and swivel adjustment 0-45°Cutting width 1000 mm, manually adjustableCut to length on the miter stopup to 2600mmSuction connection top/bottom 50/100 mmWorking height 910 mmWeight from 450 kg Djb Eovyurpexrbaout

Condition: good (used), Year of construction: 1974, Double edger / edger line with 2 adjustable saw blades Esterer DKV/E-2B (cutting flange) Right-hand machine (adjustable saw blade right + center) Zero-line left With hydraulic-electric adjustment With cross-cut saw With roll feeder With laser device With 2-blade chip separator With pull-off table left + right discharge With inclined conveyor With conveyor belt With length sorting system (3 boxes left, 3 boxes right) With slat head With templates With saw blades Optionally with inclined conveyor Good condition - available immediately Duebev N Iqko Exrbaet Location: Austria, near St. Pölten

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Djb Exeqi Azpjrbajut Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: used, Longitudinal circular saw Longitudinal circular saw Cross saw / longitudinal circular saw built in 1999 works from below for lengths up to 4.7 m Material thickness up to 110 mm also suitable as a traveling saw behind a production line Dueb Exoq E Ivtsrbast INFO! ! For such a new Flender circular saw flat motor 10 KW you pay 4700 EUR so more than at jöma for the whole machine

Condition: ready for operation (used), operating hours: 2,500 h, total length: 12,000 mm, net weight: 3,500 kg, Hello, I am selling a Lignuma band saw, cutting length 9.5 m, good condition, the saw includes a sharpener and additional saws. The machine is ready to work. Dueb Exrbsv Svhcoast

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Dujb Exrevnv U Ujbaet Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dsb Eevyuqfjxrbaout

Year of construction: 2023, Condition: new, Radial Band Saw Dusbjmbbivj Exrbajt

Condition: like new (used), Functionality: fully functional, Panel dividing machine FM 16 - DNC- 3100 x 3100 As good as new, machine no. 33542, Küenle inverter with Stöber synchronous servo drives of the latest generation with integrated absolute encoder guarantee maximum positioning accuracy and control dynamics SCHEERWIN user interface and PLC program, Graphical and intuitive user interface as a document-oriented 64-bit solution under WINDOWS 10 Refurbished and repainted, 1 year warranty Angle stop left consisting of: 1 FM 16-3100 rip saw with hardened guides, with automatic forward and return movement of the saw unit (automatically lowered during return movement); by. Feed speed 2 - 40 m/min, infinitely variable via potentiometer. Return speed rapid traverse, automatically lowered. Extraction ducts in the machine base and in the pressure beam; adjustable Saw motor 7.0 kW Ritzer motor 1.1 kW (can be switched off separately) Cutting length 3100 mm, saw blade projection 80 mm. 1 material feed table HP 5021 for rear mounting on FM 16, with 6 clamping slides, driven by a Stöber servo motor. The dimensions are measured via a pulse generator and measuring rack. Dimensional resolution 0.05 mm - therefore maximum approach accuracy. Feed speed 25 m/min, table length 3100 mm, stop depth 3100 mm, 1 angle pressing device WP with pressure claw for cross sections, adjustment range for 2400 mm, fully automatic 1 SP 5000 offcut device for offcuts up to a minimum of 5 mm 1 HP 5024 angle stop table for front mounting. Machined steel angle, table support made of Pertinax. Table size 1800 x 800 mm 1 workpiece support table HP 5025 for front mounting. Table support made of Pertinax. Table size 1800 x 800 mm 1 air cushion device in the front tables HP 5024 and HP 5025 complete with radial fan incl. 1 circular saw blade KSB 4005 for saw motor, ø 305 mm, Z = 60 1 circular saw blade KSB 4006 for scoring motor, ø 200 Duob Exrounwk Tobast

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Deb Exrstykw Sobasut Roller table is included Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us.

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, cutting height (max.): 100 mm, worktable length: 7,000 mm, TECHNICAL PARAMETERS maximum cutting width 300mm Dsb Esv Td R Uoxrbasut maximum cutting height 100mm maximum element length 6m automatic material pusher cutting out defects with fluorescent pencil length of the feeding table 7m length of the cutting unit 1m length of the receiving table 1.7m maximum disc diameter 500mm engine power 8.9kw year of production 2004 power supply 400v

Condition: used, cutting width max. 375 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw ----- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 500 mm, Z=108. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: Option A: 220x125/310x50mm Option B: 350x80/375x50mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- Dob Exjvnv U Ijrbasut (technical data according to the manufacturer without guarantee!)

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Dusb Exevyup Uerbajt

Condition: good (used), Year of construction: 2000, ACMA EDGE MACHINE: Duob Eevu Dkdjxrbast - cutting length 4 M, - cutting height 100 mm. - saw motor 11 Kw, - laser.

Condition: used, machine/vehicle number: G-KR127757P, Laguna Fusion panel saw, good condition, 1450 watts, 1118 mm table length, 792 mm table width, 79 mm cutting height, 3800 rpm, 110 kg Deb Exrjvw Ec Tsbasut Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Dob Exsv S Uz Ijrbasut Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, cutting width max. 330 mm Cutting height max. 150 mm Saw blade diameter 550 mm Motor output 7,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw ----- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 550 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 220x150/330x50 mm Saw blade motor power: 7.5 kW Saw blade diameter: 550 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Dob Ejvnv T Rjxrbajut Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Dusb Eevyupzoxrbast

Condition: excellent (used), Year of construction: 2008, OMGA MITER SAW: - max distance between blades: 2800 mm Dsb Eevu A Syexrbajut - min distance between blades: 158 mm.

Condition: new, Concept 350 Plus Partnership Edition- Cutting length 3200 mm -General equipment features:Saw unit can be tilted up to 46°Pressure beam, incl.:LED lighting with 3 differentaction colors:- WHITE: machine at rest- RED: pressure beam lowers oremergency stop function- BLUE: saw unit movesvariable support table 800 x 200 mmscoring system using main saw blade in synchronizationautomatic workpiece length detection forminimum travel distancesmovable and height-adjustable control panel,incl.:- Saw blade stand- Template holder- Emergency stop button, start button, selector switchGrooving/scoring, sawing/sawing, rotary switch- Feed speed- Switch for laser (optional)- USB socketPartnership Edition, incl.:- Motorized width stop with 4 aluminium stops that move synchronouslyAll 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long.- Screen control (8" touchscreen). The graphical user interface offersthe following functions:- Tool database- Angle cut calculation at the cross-cut fence- Cutting plans can be created and saved- Programs can be saved, exported and imported on USB- Telescopic fence extendable to 3,400 mm incl. 2 digital displaysTechnical data:- Cutting length: 3,200 mm- Max. Saw blade projection: 100 mmat 90°, 72 mm at 45°- Saw blade: diameter 300 - 350 mm,bore 30 mm- Saw blade rotation: 4,000 rpm- Motor: 5 kW (= 7.5 HP)- Feed speed: 0 - 40 m/min.- Total length: approx. 4,270 mm- Weight: from approx. 1,150 to 1,550 kg(depending on equipment)- Required air pressure: 7 bar- Suction nozzle: 1 x 100 mm, 1 x 120 mm- Order AL202 - 38.060,00 € LVP / Partnership Edition 33.490,00 €Options:- Cutting line laser- Order no.: 36410451 - 985,00 € LVP / Partnership Edition 895,00 €- Saw motor with 7,5 kW (10 HP)- Order no.: ,00 € LVP / Partnership Edition 525,00 €available from stock immediately24 h ready for ?v=Heg6aO4rGdc Dob Exrsvyupnsbasut

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm Dsb Exrjvyt D Debaeut swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Djbsvyd Due Exrbaeut

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm Dujb Exrbovyd Dnoajt

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Djb Ejvyd Dboxrbasut

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, - Saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 1 includes: - 5.5 kW (7.5 HP), 2 speeds - Parallel stop, 1000 mm* - Large suction hood (PSV) - Basic scoring saw with LED lighting Dob Eovyd A Doxrbaout