Year of construction: 2005, Condition: used, - working width (mm): 2600 Deliqh Nsnxkyfemeut - engine power (kW): 37 - Top rollers: with PU rubber coating

Condition: used, Year of construction: 1999, Horizontal panel saw SCM Sigma 90, year 1999 for sale! Dismantled Dsliqh Nev S Um Romsut Cutting length 4500 mm Cutting height 90 mm Type horizontal Blade diameter 350 mm Engine power 11 kW Scoring unit Yes Weight ~3040 kg CE marked

Condition: used, Year of construction: 1980, Functionality: fully functional, Equipment: documentation/manual, Maximum cutting height 200 mm Training belt width 350 mm 2 motors with 37 kW per unit Doliqov Rf N Hsh Nmeut Maximum blade diameter 300 mm New automatic lubrication with electric pump Dimensions length/width/height 3000 x 2300 x 1900 mm Weight approx. 5000 kg Comes with many accessories, including saws, bushes, and spacer rings

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 452-0822, cutting length (max.): 2,550 mm, cutting height (max.): 1,250 mm, total height: 1,850 mm, total length: 3,500 mm, workpiece weight (max.): 100 kg, total width: 700 mm, overall weight: 100 kg, workpiece height (max.): 40 mm, For: chipboard, plywood, blockboard, MDF, plexiglass, acrylic, polycarbonate, fiberboard, veneered panels, sandwich panels, Alucobond, Dibond, PROMAT, Rigips, Fermacell, Trespa and much more. The panel saw consists of a special aluminum profile frame and an MDF support plate. This construction gives the panel saw optimal stability with low weight. The sliding carriage is guided horizontally by 8 ball bearings and 2 toothed belts. A repeat stop including scale (up to 700mm) is mounted on the left of the sliding carriage. This stop enables strip cutting from the top edge of the panel material. The sliding carriage contains the turntable made of VA sheet steel, which is suspended on 2 pull ropes. The plunge saw TS 75 EBQ is mounted on this turntable. The turntable can be rotated by 90° for horizontal or vertical cuts. A locking bolt fixes the positions. There is also a pressure shoe under the turntable. This pressure shoe presses the panel material onto the MDF support plate. Dueliqov E Egneh Nmot

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer K3Winner Comfort panel saw with a cutting length of 300 mm. The machine was only in use for a short time and can therefore be described as new. Technical data: - Panel sliding table 2000 mm - Outrigger table 1100 mm - Miter ruler 1300 mm - Degree grid index - Circular saw swivels 90-45° - Cutting height max. 104 mm with saw blade D315 mm Deliqhov H Adme Nmout - Cutting width 800 mm - 5.5 HP (4 kW) motor 400 volts - Year of manufacture 2024 The circular saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, hammer, panel saw, format Reference: R-E2B61

Condition: used, cutting height (max.): 100 mm, cutting width (max.): 2,200 mm, overall weight: 600 kg, working width: 2,200 mm, Saw blades can be tilted up to 45 Dimensions 4100x1700x1550 mm Dsliqheua Apws Nmout

Condition: new, - profile width max. (mm): 90 - profile height max. (mm): 80 - saw blade diameter (mm): 350 - saw blade bore (mm): 30 - motors: 2 each 1,5 kW - suction connections: 2 each Ø 80 mm - Pressure (bar): 6 - 7 - weight (kg): 300 - Cutting of mouldings: for wood, plastic and aluminum frames - Saw blades: 2 fixed at 45°. - Pneumatic aggregate stroke: with two-hand operation - Adjustable stroke speed - Pneumatic lamella clamping: in machine cycle - Automatic lamella adjustment: to profile shape - Diagram plates (mm): 700 long on the right and left side - Pneumatic length stop - Motor protection switch Duoliqhefiqhbo Nmot - Motor brakes - Tool kit - maintenance unit - Pressure switch Machine features - Easy handling - Quickly executed work cycle - Low maintenance and cleaning effort

Year of construction: 1993, Condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Dusliopcgy Hsqh Nmst

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Year of manufacture 1990 On stand Dsliqhet Sin Se Nmout With pneumatic clamp Hydraulic feed brake Saw blade for aluminum 2 kw/380 Volt

Condition: used, Year of construction: 1962, Functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Dusliqh Nouprqwsmst Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: ready for operation (used), Year of construction: 1998, Kölle sliding table saw KS340 Year of construction 1998 CE- KONFORM carriage length 3200 mm Doliqhjrhghao Nmout Cutting width 1050 mm tiltable up to 45° by means of handwheel Height adjustment of saw blade with handwheel Cutting height 90° 110 mm Cutting height 45° 77 mm Speed 3000/4400 rpm Scoring unit Digital display: - Rip fence - Angle fence - Cross table Parallelogram table can be tilted 45° on both sides, digital display Suction connection D 120/80 mm Space requirement approx. 3300 mm x 1900 mm x 1600 mm Weight 740 kg

Condition: used, Twin mitre saw from Hüllhorst Djliqh Njua Apqsmjut 2x 90 ° 170 cm Pneumatic tool clamping; Working width 1700 mm Working height 100 mm Machine weight approx. 600 kg Dimensions approx. 3400x1800x1100 mm IMMEDIATELY AVAILABLE

Year of construction: 2004, Condition: excellent (used), - working width (mm): 1200 - total power (kW): 47,6 - saw shaft top: 1 - saw shaft bottom: 1 - 5 saw shafts: included Dolieihf Hxoqh Nmeut - 1 shaft carriage: included - various spacer rings - top rollers: with PU rubber coating - bottom rollers: corded - machine was technically overhauled approx. 1 year ago by Paul company

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm Duslsp H Tgbeiqh Nmst cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood dimensions 3250x3100x830mm Weight 922 KG

Condition: excellent (used), KFS40 sliding table saw Upper suction unit Rear roller table Djliqhot Ecabe Nmeut 1250 mm right of blade 45° tiltable Table 2600 mm

Year of construction: 1975, Condition: good (used), A decoupling saw with a table circular saw from Behrens is offered here. Type: CB 3121 Built: 1975 Dimensions: 2010 x 1000 mm Motor speed of the decoupling saw: 600-1000 upm/rpm infinitely variable Deliqh Ned Sd Sksmjut Cutting height: 40mm Extension: 1700 mm Cutting height of the table circular saw: 35mm Saw blade diameter: 250mm The circular saw is foldable and is equipped with a suction system.

Condition: used, Cleaned, function checked, test run 4 x sanding pad: - 2 x surfaces 25 mm - 1 x convex approx. 20 mm - 1 x convex approx. 30 mm   second hand Make Braun Type BP 700 Working width 700 mm Swiveling table Grinding height 190 mm Required space approx. LxWxH mm 1400 x 700 x 1700 Storage location 97447 Gerolzhofen Delivery in the current condition as seen - free on truck - Dusliqh Njvw Dxgsmot

Year of construction: 1978, Condition: used, machine/vehicle number: 1010, Roll diameter 1.000 mm band saw blade length 7.100 mm, max. cutting width 960 mm, max. cutting height 620 mm, motor 5,5 kW, table size 1.450 x 1.030 mm, Duoliqshzgnzoh Nmet installation dimensions L x W x H: 1,900 x 1,160 x 3,130 mm Sale in "as is" condition, ex location Seevetal, without freight and packing, subject to prior sale

Year of construction: 1991, Condition: used, - Grooving saw unit: controlled (on and off) Deliqh Nob Scc Dsmjut - Main saw unit - Note: This machine has been specially built for grooving and ripping drawer fronts. In general, panels can be grooved or split.

Condition: excellent (used), Veneer saw FM8 Dslijtu Imxeqh Nmout Rear fence table Year of construction 1991

Condition: used, Functionality: unexamined, machine/vehicle number: 80234, HEMA band saw with roller diameter 800 mm, blade length max. 5600 mm, motor 3 kW ( 4 HP), upper and lower saw blade guide, ex location Seevetal, Sale in "as is" condition as inspected, Dusliqheumav Ae Nmst without transportation, subject to prior sale

Year of construction: 1996, Condition: used, - Connected load (kW): 2 Deliqsbazzpjh Nmeut - Control voltage (V): 24 - Supply voltage (V); 400 - Compressed air supply (bar): 7 - Saw blade diameter (mm): 300 - Sawing width max. (mm): 150 - Sawing height max. (mm): 100 - Stop table length (mm): 4000 - Outfeed table length (mm): 2500 - swivelling: via control

Condition: excellent (used), Year of construction: 2009, Griggio Fromat circular saw SC 1400 4 kw year of construction 2009 table 1500mm Delotp Tm Ueiqh Nmsut

Condition: like new (used), Year of construction: 2023, machine/vehicle number: KK00040333, cutting length (max.): 1,600 mm, cutting width (max.): 700 mm, cutting width at rip fence: 700 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, overall weight: 277 kg, power: 4 kW (5.44 HP), Circular saw minimax sc 2 c compact, Cutting length max. 1,600 mm, Saw blade max. D = 315 mm, Cutting height max. 100 mm, (79 mm at 45°), max. cutting width at rip fence 700 mm, Extendable aluminum telescopic angle mitre fence, Duoliqhjt Epnls Nmjt Motor 4 kW (S6), 400 Volt, 50 Hz, Saw blade speed 3,500 rpm, ex stock Seevetal, without transportation, Subject to prior sale,

Year of construction: 2023, Condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Doljf A Ehtoiqh Nmjut Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction