Condition: good (used), Year of construction: 1991, Functionality: fully functional, cutting length (max.): 2,800 mm, cutting width (max.): 1,000 mm, table length: 2,800 mm, overall weight: 1,100 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, ALTENDORF panel saw, type F45 with scoring unit and 2800mm sliding table, tilting up to 45° Csliqddewd Nazj Ejgt

Condition: excellent (used), Year of construction: 2006, FH 2 jointing saw and fine-cutting saw with jointing unit (planing unit) and veneer stop table Robust mechanical engineering by Mayer A video of the machine in operation can be sent upon request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm The saw unit and jointing unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on precise linear guides. Rear support table with full-length finger stop, adjustable from 2 - 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, milling unit 1.0 kW The motors can be conveniently switched on using the handle, meaning they only run when needed. Carbide-tipped fine-cutting blade, sharpened Z4 planer head, equipped with new knives and spare knives included Practical front veneer support, extendable for planing unit Left-hand angle stop 100mm extraction connection with extraction duct Emergency stop switch CE mark Operating instructions On-board tool kit Original paint, only a few areas touched up Machine dimensions approx. 4350 x 1700 x 1400mm (LxWxH) Weight approx. 800kg. Cjliqowamnzjdd Esgt The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: ready for operation (used), Year of construction: 2018, Brand: Rema Model: FX 550 Machine no: 026 Year of manufacture: 2018 Siemens touch screen Controls saw blade up/down/tilt, cutting fence Digital gauge on length stop Cgoliqddowdtzie Eot Technical data Sliding table length 3900 mm Saw length 3900 mm cutting width 1400 mm Cutting height with 550 blade 90 degrees 120-20 0mm, 45 degrees 85-140 mm Motor 6 kW Scoring unit motor 0,75 kW Power 400 volt, 50 Hz, 3 phase Stock no: 2002350BXA

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 4892/1-902, saw blade diameter: 250 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 55 mm, input voltage: 400 V, saw blade bore: 30 mm, For sale is a Holzher Sector 1255 Pro vertical panel saw. It features automatic pneumatic locking and digital stops. It has the usual signs of wear but functions perfectly. The machine has been disassembled and is ready for shipping. Cjliqddswhaqls Eogt

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 1,350 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 170 mm, saw blade diameter: 500 mm, table length: 3,300 mm, total length: 3,300 mm, main saw diameter: 500 mm, height adjustment type: hydraulic, overall weight: 1,300 kg, extraction nozzle diameter: 125 mm, type of motor: three-phase motor, slide length: 3,300 mm, table width: 1,350 mm, type of input current: three-phase, power: 5.5 kW (7.48 HP), Equipment: scorer, Martin T72A sliding table saw, in very good condition, from a one-man operation. Fully equipped. Hydraulic lifting and tilting with digital displays. Width stop adjustable with handwheel up to 1350 mm, foldable. Crosscut stop up to 3500 mm with digital displays. Aluminum cross-cut table angle adjustment with digital displays, continuously adjustable from -45 to +45 degrees. Additional second support table for hanging. Cgjljwg Tn Ieiqdd Eet Front table support foldable. Counter-angle stop on the crosscut guide up to 180 degrees. Sliding table length 3300 mm. Saw blade up to 500 mm. Cutting height 170 mm. Scoring device adjustable from the outside, continuously adjustable. Various saw blades. Forklift available. Can be viewed while still in operation. Price €8,200 plus VAT.

Condition: used, Year of construction: 2008, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 7 Feedrate max: 120 m/min Continuously variable feed: Yes Saw blade projection: 95 mm Scoring saw: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left Coliqjwfgwtsdd Ejgt Control: SELCO OSI Total connection: 21 kW Weight: 3.880 kg

Condition: good (used), Year of construction: 1996, Crosscut and Miter Saw GRAULE Type ZS 200 Year of Manufacture: 1996 400 volt three-phase brake motor, 5.0 kW Cjliqewc Tgvodd Eegt Saw blade diameter: 520 mm, bore: 50 mm Cutting height: 200 mm Cutting length: 420 mm Machine stand Hydraulic feed brake Pneumatic saw blade spray system Saw blade: 520 x 4.4 x 50 mm, 60 teeth

Condition: new, Net price: €4,900 -Including table extension (folding) -Including parallel stop -Including crosscut stop The ZBV 500-S is a height- and angle-adjustable construction site table saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with high cutting heights on the construction site. This makes it ideal for processing the increasingly popular insulation material in conjunction with the AVOLA special HM/A/PH circular saw blade (see above). Motor power P1/P2*: 6.4 / 5.0 kW Cgjliqdjwf Nd Ned Est Power supply: 40 V Frequency: 50 Hz Device plug: 532CEE Saw blade diameter/bore: 500/30 mm Cutting height 90° / 45°: 0-170 / 0-120 mm Incline adjustment: 90°-45° Table size length/width/height: 1223/850/850 mm Weight: 210 kg

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: - Wheel diameter: 600 mm - Belt speed: 1550 m/min - Cutting height: 400 mm - Cutting width: 580 mm - Blade length max.: 4735 mm - Saw blade width min. / max.: 15 mm / 30 mm - Optional with special coating Saw blade width min. / max.: 8 mm / 25 mm - Table size: 810 x 590 mm - Table height: 920 mm - Suction nozzle: 2 x Ø 100 mm - Motor power: 2.2 kW / 3 HP - Voltage: 400 V / 50 Hz - Color: RAL 7035 light grey and RAL 5000 violet blue - Net weight: approx. 275 kg TECHNICAL DESCRIPTION - Solid German mechanical engineering - Machine stand in elegant, modern, torsion-free double chamber welded steel construction - Upper and lower door secured by limit switches - Upper and lower precision band saw blade guide APA 2, size 2 - Finely planed cast iron table - Swivel table top up to 45 - Dyn. balanced band saw wheels with vulcanized rubber bandages - Stop guide can be used to the left of the saw blade, stop profile can be folded down - Blade tension indicator - 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, no. 3780.250D - Mechanical height adjustment of the saw blade guard by handwheel with locking pinion - From 2.2 kW - Rotary cam switch with direct start and emergency stop button - From 3.0 kW - Rotary cam switch with star-delta start and emergency stop button - Mechanical motor brake with main switch and motor protection relay - CE-compliant incl. transport pallet incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Hochheim Celiqdeudqlujd Ejgt

Condition: used, Year of construction: 2015, Cutting length: 4.500 mm Width of lifting table: 2.200 mm Number of grippers: 9 Feedrate max: 140 m/min Continuously variable feed: Yes Panel thickness min: 10 mm Saw blade projection: 95 mm Saw blade diameter max: 380 mm Main motor power: 15 kW Scoring saw: Motoric adjustment BIESSE DigiSet: Yes Groove cutting function: Yes Lift table: loading from behind For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes SELCO QUICK OPTI: Yes PC office licence: Yes SELCO Quick Change: Yes SELCO Side aligner: Yes Cgoliqddjwd Si Se Est Head aligner: Yes SELCO Discharge unit for thin boards: Yes Control: PC control, BIESSE OSI PLUS Conformity marking: CE mark Total connection: 33,5 kW Weight: 8.060 kg Space requirement Length: 10,28 m Space requirement Width: 6,65 m

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €11,990 -Scoring unit -Saw blade tilt and height adjustment are manual -Cutting height 200mm -Scoring unit with separate drive motor -Main saw blade with belt drive and speeds of 2800/3665/4800 rpm -High weight ensures vibration-free operation -Large outrigger table with material roll, parallel stop with round bar guide -Extendable aluminum rip stop with two folding stops -7.5 kW main motor mounted on a robust cast iron frame -Four-bearing sliding table made of anodized aluminum with high torsional rigidity -Multi-position locking on the sliding table. Comes standard with table extension and table extension made of heavy-duty sheet metal -Large pendulum guard can be easily raised using a gas spring -Saw blade clamping via tool-free Rapid system +Connection Extraction Extraction nozzle diameter: 120 mm Extraction nozzle diameter of saw blade guard: 80 mm +Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Power input: 8.3 kW Power output: 7.5 kW +Sliding carriage and table Cslowf Ndcoiqdd Ejgt Format sliding carriage length: 3200 mm Format sliding carriage height: 890 mm Table height: 890 mm +Circular saw unit Cutting width with parallel stop: 1450 mm Max. cutting width to the left of the saw blade: 3200 mm Saw blade inclination: 90 – 45° Max. cutting height 90°: 200 mm Max. cutting height 45°: 140 mm Saw blade diameter: 550 mm

Condition: new, Year of construction: 2021, New machine Year of construction: 2021 Equipment and technical data: HOLZKRAFT HBS S - Precision wood band saw in heavy professional design with saw band quick clamping system for the professional user Heavy-duty professional design with high dead weight for maximum running smoothness Smooth and precise running thanks to torsion-free machine housing Large, one-piece cast iron saw table with ground and polished surface The solid saw table is easily and conveniently adjusted via a handwheel rack and pinion guide the inclination is infinitely adjustable from 0° to 45° (patented) Fast and precise cutting height adjustment via handwheel and toothed rack with millimeter scale Large cast parallel fence With angle stop as standard Technical data: Work table dimensions 830 x 600 mm Cutting speeds 1615 m/min Flywheel Ø 630 mm max. cutting height 400 mm max. cutting width with/without fence 570/ 610 mm Celiqdskwhatod Esgt Saw blade length 4600 mm Precision guide top / bottom Saw table inclination 0 - 45° Motor power 400 V /50 Hz/P2 3.75 kW Suction nozzle diameter 2 x 120 mm Incl. saw blades: (Uni 4600x10x0.5 mm; Z4) (Uni 4600x20x0.5 mm; Z4) (Uni 4600x25x0.5 mm; Z4) Location: Hochheim Availability: Immediately

Condition: new, Net price: €3,990 Roll diameter D = 640 mm Cgoliqjwf Nb Ijdd Ejt Saw blade length 4780 mm Work table 870 x 620 mm Max. cutting height 400 mm Max. cutting width 620 mm Saw table inclination 0 to 15° Motor 2.2 kW / 400 volts Weight approx. 320 kg

Condition: new, Year of construction: 2022, New machine Year of construction 2022 large radial circular saw for cutting to length and trimming floorboards quick changeover between double miter cuts or cutting to length robust cast iron swivel arm with interchangeable hexagonal guides saw arm can be swiveled 45° on both sides Cutting height 90° max 640x20/610x60 mm Cutting height 45° max 380 x 100 mm Cutting height -45° max 330 x 100 mm Cutting depth with motor 0°/45° 100/50 mm Diameter of saw blade/bore 350/30 mm Saw blade speed 2800 rpm Table (LxW) 1675x1060 mm Cjliqdjq Ilxwod Ejgt Motor 3 KW/400 V Weight 220 kg Availability: short term Storage location: Hochheim

Condition: good (used), Bäuerle PKS mobile pendulum circular saw with a braked 5.5 kW motor. Net price: €4,200 - Cutting height 125 mm Coliqdjwf I I Tsd Ejgt - Rewound motor - 5.5 kW (braked) - Pivoting - On a mobile base You will receive an invoice with VAT shown. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: used, Year of construction: 1968, Used machine Used metal cutting saw of the company Maschinenbaugesellschaft type MS 60 Cjlsunn Ntsiqdd Esgt MNo.: 1083 Availability: short term Location: Solingen

Condition: new, Altendorf F25 demonstration/exhibition machine at a special price of €11,250 net. BASIC EQUIPMENT: Cgsliqdjwf Iutjd Eot • Manual height and tilt adjustment 0–46° of the saw blade, with digital display • Double sliding table, carriage length 3,200 mm • Crosscut miter stop, cutting to lengths up to 3,450 mm • Saw blade diameter max. 315 mm, saw blade projection max. 104 mm • Cutting height 100 mm, 70 mm at 45° • Machine height 880 mm OPTIONAL EQUIPMENT: ▶ 5.5 kW (7.5 HP), 2 speeds ▶ DIGIT X parallel stop, 1,000 mm* ▶ Large extraction hood (PSV) ▶ Scoring unit with LED lighting ▶ Front support roller F25 ▶ Template holder F25 You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex warehouse Haldensleben.

Condition: used, Year of construction: 1983, Double mitre saw Year of construction 1983 for dimensionally accurate cutting of small cross sections of wood, plastic and aluminum Cgsliqdst Haf Ded Eet e.g. for galley rails, picture frames, edgings etc. both saw units are infinitely adjustable for 90° to 45° cuts the length is set by hand according to the scale or, in the case of pre-cut lengths by scanning with a special pair of slotted fences, which are removed from the cutting area during sawing (optional) Cutting length max. 2200 mm min. 240 m Pneumatic saw feed with oil brake cylinder, infinitely variable Clamping device from the front and/or from above, pneumatically operated, from above up to max. 50 mm workpiece height Pneumatic control Safety two-hand control, individual switching for each saw unit Compressed air connection 6-7 bar Air consumption/working clearance 3-4.5 NL Connection for suction 50 mm Saw blade drive 2 x 1.1 kW three-phase motors 2800 rpm Dimensions 2940 x 1100 x 1220 mm Weight approx. 360 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2023, Net price: €5,750 New HEMA Garant 600 ...fully equipped with special upper and lower roller guides, with mechanical height adjustment of the guide rod, pivoting table, vulcanized band saw wheels, motor protection switch, and dust extraction nozzle. Roller diameter, mm: 600 Motor power, kW (HP): 2.2 (3) Cutting speed, m/min: 1,550 Celiewf Itieqdd Eogt Cutting height, mm: 355 Cutting width, mm: 565 Blade length, max. mm: 4,500 Weight, kg: 280 You will receive an invoice with VAT. Price is gross ex Haldensleben warehouse. Shipping by freight forwarder is possible.

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay Cslieudqlnsqdd Eogt · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Eumacop ER 600 band saw with APA precision guide. Technical details are shown in the last photo. Cjlijwf Iq Ijqdd Esgt You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment: BASIC MACHINE Tectra 6120 CLASSIC cutting length 3100 mm - Width stop cutting width 3100 mm, with SL 3100, welded steel construction - absolutely stable and torsion-free - Angle - air cushion table and stop ruler 1800, table size 1800 mm x 600 mm, permanently mounted - 2 support air cushion tables 1800, table size 1800 mm x 600 mm, permanently mounted Cgoliqdjun Dybed Est - Feed roller on the front (1 per table), prevents damage to the panels when placing them on or putting them down - 5 workpiece clamps - floating design, the workpiece clamps can compensate for unevenness in the panels/packages via a linear guide - no pressure points on rollers - Control system CUTCONTROL 2, 21.5"" TFT display" - Saw carriage standard 7.5 KW, 400 V 50/60 Hz - 4400 mm - EASY-PLAN - dongle version, especially for the simple and quick optimization of parts lists - OPTI-CUT software is based on office optimization - OPTI-BASE optimization software for the office - 1 x office license - dongle version (USB hardlock) - Angle pressure device pneumatically controlled - infinitely variable up to 1200 mm - Angle pressure device program-controlled, path-optimized - infinitely variable up to 1200 mm - Automatic central lubrication, no maintenance required for lubricating the machine - EasyLabel - label printer for HOLZ-HER machines, label printer for direct connection to machine computer - Hand-held control unit for remote control of the machine for easier operation of the machine - Control panel complete standard monitor for Classic The vacuum lifting device shown in the picture is not included in the scope of delivery! Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1999, Functionality: fully functional, power: 5.5 kW (7.48 HP), Equipment: scorer, Net price: €3,300 Panel saw with various accessories from Robland. -Front support roller -Scoring unit -5.5 kW motor -Saw blade pivots up to 45°* -Large extraction hood -3200 mm carriage length -1400 mm cutting width -Year of manufacture: 1999 -Side trimming shoe -400 mm saw blade possible (500 mm without scoring unit) Cjliqddowf Ip Ro Esgt -Clamping lever for clamping the workpiece You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex-works in Haldensleben.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional with special covering saw blade width min. / Cgoliqev Huggsdd Est max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Extraction nozzle 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Machine stand in elegant, modern, torsion-free, double-chamber welded steel construction, upper and lower doors secured by limit switches, upper and lower precision band saw blade guides APA 2, size. 1 Finely planed gray cast iron table Table top can be swiveled up to 45° Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Stop profile can be folded over Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth width 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion Push button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE-compliant GS tested Machine stand left-hand version Drive motor 1.5 kW / 2.0 HP Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Cgjlieuvab Reqdd Est Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.