Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Coler Elmwsn Tlizerb Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Functionality: fully functional, - New machine offer - Pneumatic saw blade feed Motor power 7.5 KW Cross section max. 280 x 135 mm, or 360 x 55 mm Celn Tliou Nyktszorb complete with: * 1 mtr. work table to the left and right of the saw blade * beveled plate behind saw cut for removal of trimming cuts trimming cuts * 2-hand operating device * Front saw blade guard * Carbide saw blade diam. 500 mm * Fixed front guard (no protective grid) Further options on request

Condition: used, Year of construction: 2024, machine/vehicle number: L24100210, Neue Ausstellungsmaschine! Crjln Tlowggakjizeb Besonders schwere Ausführung mit hohem Eigengewicht für maximale Laufruhe • Besonders ruhiger und präziser Lauf dank verwindungssteifem Maschinengehäuse • Großer Guss-Parallelanschlag mit Rundstangenführung, leicht verschiebbar • Guss-Schwungräder mit Gummibelag und Reinigungsbürste •Großer Grauguss-Sägetisch, schwenkbar mit geschliffener und polierter Oberfläche • Präzise Schnitthöhenverstellung über Zahnstange mit Millimeterskala • Endschaltergesicherte Türen • Selbstbremsender Motor • Zwei Absaugstutzen Techn. Daten: Abmessungen Tisch (L x B x H) 720 x 520 x 860 mm Schnittgeschwindigkeit 1.650 m/min Gewicht ca. 240 kg Schnitthöhe max. 350 mm Schnittbreite max. 520 mm Sägeblattlänge max. 4.260 mm Sägeblattstärke min./max. 0,5 / 0,6 mm Präzisionsführung oben / unten Sägetischneigung 0 - 20 ° Abmessungen (L x B x H) 870x 620 x 1970 mm

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AB/183594, cutting length (max.): 3,800 mm, cutting width (max.): 1,700 mm, cutting width at rip fence: 1,700 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,800 mm, total length: 4,200 mm, total width: 4,250 mm, height adjustment type: electric, table height: 905 mm, length stop: 2,150 mm, pivoting range: 45 °, power: 5.5 kW (7.48 HP), workpiece length (max.): 3,400 mm, Equipment: motor brake, scorer, Carriage 3.80m long / saw blade can be pivoted to one side up to 45° / scoring unit / new motor (5.5kW) since March 2024 / all stops manually adjustable / cutting height with 350mm saw blade 105mm, max. saw blade diameter 400mm / accessories: 1 hold-down clamp, 2 clamps, 1 separate angle stop Colnov I S Rlo Tlizerb

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. Coln Tlijv Aalyezerb - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Year of construction: 2003, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Crjln Tlewcgcwsizeb These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 03/1792 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, HOLZKRAFT S 400 elite S 32 MA Professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504757 Machine equipped with : - motorized height adjustment and tilting of the saw unit - Digital display for tilting - Integrated on/off switch of the motors in the edger carriage Standard equipped with scoring unit with sepa- drive motor, adjustable from the outside - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine Crelnji Dpgye Tlizeb subject to prior sale

Condition: used, Year of construction: 2003, Functionality: fully functional, Saw blade diameter 500 mm Crslnouglvte Tlizsb Saw blade motor power 4.0 kW ATTENTION: No motor brake Roller conveyors: 1 m to the left of the saw blade 2 m to the right of the saw blade Roller diameter 60 mm Usable width approx. 590 mm 2 manually adjustable folding stops Scale rubbed off and difficult to read Emergency stop switch in the operating area Working height approx. 760 mm Connected loads: 400 V 3Ph, 50 Hz Suction connection diameter: 100 mm Optional: Renewal of the dimension scale

Condition: used, Year of construction: 2023, Special price exhibition machine, Bad Wimpfen. Basic machine. Cutting technology meets the future. The CONTROL has always defined a class all its own – the premium class for vertical panel saws. But this advancement never stops. We have expanded the CONTROL into a premium-class vertical cutting center, with a higher level of sawing process automation and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved operating comfort in every detail. Saw frame • Machine manufactured with precision parts to 1/100 mm • Solid, self-supporting, firmly welded, torsion-resistant saw frame • Full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller blocking during sawing Saw beam • Stable, durable saw beam steel construction • Automatic saw beam locking with interface detection Saw unit • Play-free, smooth-running guides • Robust bearings of the motor carriage ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Saw motor 1-n, 400V, 50Hz • Speed 4800 rpm • Greater comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic immersion and pivoting of the saw motor • Pneumatic clutch for easy conversion to manual operation • SUPERSILENT sound insulation to reduce sawblade noise • Electromagnetic motor brake Control • 12" inch touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Continuously adjustable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour meter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vert. Axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple awards (including the Swiss Design Award) • Functional and user-friendly ergonomics Installation • Wall or freestanding (optional) installation possible Note: Permissible ambient temperature: min. + 5 degrees / max. + 40 degrees Celsius Relative humidity: 19-95% Without mains voltage fluctuations greater than +/-10% of the nominal voltage, a voltage stabilizer must be installed at the installation site. Illustrations may contain special accessories. Type 6224 Cutting area 5300x2240/2100x80mm Pcs Cutting length 5300mm Cutting height vertical cut 2240mm Cutting height horizontal cut 2100mm Cutting depth max. 80mm Cutting depth min. 4mm (automatic feed) Cutting depth min. 2mm (manual feed) For the exact installation dimensions, please refer to the brochures or installation plans. ProLock Easy-Fix tool clamping system Pcs Scoring saw unit VSA Continuously adjustable Pcs Permanently installed scoring saw unit with pneumatic retraction. Push button with indicator light directly on the saw unit and control box. Good, easily accessible adjustment of the scoring unit. Continuously adjustable scoring width. (incl. scoring saw blade) Crolnjwhr Ngj Tlizsb

Condition: excellent (used), Year of construction: 2006, FH 2 jointing saw and fine-cutting saw with jointing unit (planing unit) and veneer stop table Robust mechanical engineering by Mayer A video of the machine in operation can be sent upon request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm The saw unit and jointing unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on precise linear guides. Rear support table with full-length finger stop, adjustable from 2 - 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, milling unit 1.0 kW The motors can be conveniently switched on using the handle, meaning they only run when needed. Carbide-tipped fine-cutting blade, sharpened Z4 planer head, equipped with new knives and spare knives included Practical front veneer support, extendable for planing unit Crsln Tljwamnzoizjb Left-hand angle stop 100mm extraction connection with extraction duct Emergency stop switch CE mark Operating instructions On-board tool kit Original paint, only a few areas touched up Machine dimensions approx. 4350 x 1700 x 1400mm (LxWxH) Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: good (used), Year of construction: 1991, Functionality: fully functional, cutting length (max.): 2,800 mm, cutting width (max.): 1,000 mm, table length: 2,800 mm, overall weight: 1,100 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, ALTENDORF panel saw, type F45 with scoring unit and 2800mm sliding table, tilting up to 45° Celswd Nazen Tlizerb

Condition: used, Year of construction: 2012, total length: 2,250 mm, total width: 3,250 mm, total height: 1,700 mm, Weight: 890 kg - Table width [mm]: 1040 - Scoring saw blade diameter [mm]: 120 Creln Tlewcd D Ssizob - Roll table length [mm]: 3200 - Controlled axes: 1 - Digital readout: 1 - Max. saw blade diameter [mm]: 400 - Scoring blade: 1 - Year: 2012 - Documentation available: No - Serial number: AB/211050 - Voltage [V]: 400 - Transport dimensions: 2250mm x 3250mm x 1700mm (l x w x h) - Transport weight [kg]: 890kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2007, Striebig panel saw Evolution 6224, year of manufacture 2007 Croln Tlijvk Sh Aszob Type 6224 Year of manufacture: 2007 Motor 5.5 kW Cutting length approx. 5300 mm Cutting height approx. 2100 / 2240 mm Digital display in Y Center support Cutting depth 80 cm Saw blade diameter approx. 303 mm Free-standing installation Slatted frame moving away Wooden back wall Extraction connection D 120 mm Space requirement approx. 6300 mm x 1250 mm x 2720 mm Weight approx. 1200 kg Total connected load approx. 5.5 kW Location: from warehouse 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: new, Year of construction: 2024, Functionality: fully functional, NEW MACHINE - READY FOR DEMONSTRATION IN STOCK Aluminum arm Unit runs on linear guide rails Constant zero point even when the cutting angle is changed Cjln Tlisu Rafajzorb Automatic pneumatic opening of the saw blade guard Return spring for return of the saw unit in idle position Support table equipped with exchangeable MDF sacrificial plate Complete operation of the machine from the front Motor 400/3/50 PS.5,5 (kW 4) Total weight 320 kg Machine complete with: with: Carbide saw blade Ø 500 mm F=30 Motor speed 2800 rpm Horizontal tilting +60 / 0° /-45° Vertical tilting 0° +45° Horizontal tilting pneumatically locked Dust extraction nozzle 150 mm Cutting width with horizontal swivel: at 90°: 600 mm. at 60° rotation: 300 mm. at 45° rotation: 420 mm. Cutting height with vertical swivel at 0°: 175 mm. at 15°: 130 mm. at 45° - bevel: 100 mm. Further options on request

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Coln Tliowhr Euozerb Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2018, Brand: Rema Model: FX 550 Machine no: 026 Year of manufacture: 2018 Siemens touch screen Controls saw blade up/down/tilt, cutting fence Digital gauge on length stop Technical data Sliding table length 3900 mm Celn Tliowdtziszorb Saw length 3900 mm cutting width 1400 mm Cutting height with 550 blade 90 degrees 120-20 0mm, 45 degrees 85-140 mm Motor 6 kW Scoring unit motor 0,75 kW Power 400 volt, 50 Hz, 3 phase Stock no: 2002350BXA

Condition: used, Year of construction: 2010, total length: 3,400 mm, total width: 2,300 mm, total height: 2,000 mm, Weight: 1.250 kg Price: On request Touchscreen of the machine does not work. Settings can only be adjusted using a computer mouse.  Cjln Tliowca Ndezerb - Table width [mm]: 1150 - Roll table length [mm]: 3200 - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: 604.09.062.10 - Transport dimensions: 3400mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2024, EVOLUTION - precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic plunge-cutting and ejection of the saw unit, make your daily work much easier. your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Crslehf Dqben Tlizob Complete free-standing support Paper holder High-end grid made of synthetic materials Small parts support aluminum complete UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 6224 5300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm At 80° 200x35 mm, 50x63 mm Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Celn Tev Aub Nolizorb Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Storage location: Customer Coln Towhr Eholizorb

Condition: new, Year of construction: 2025, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Crjleih Dwvon Tlizeb Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, - NEW MACHINE OFFER - Cutting of fixed lengths according to cutting list and cutting out of defects Cutting cycle: Capping of imperfections by chalk marking Cutting with fixed lengths, Standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 lower infeed rollers 1 loading table 2 mt. Right with double marking table 1 pc. Outfeed table 1 mtr. with rear stop Height of rollers adjusted manually 12 pcs. luminescent chalk Cutting capacity: Creln Tlieu Nhcqezsb Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming variants: - Defect caps through marking - Working with cutting list consists of 10 dimensions, repetition option for each dimension each dimension and total number of pieces for each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with no. 1 ejection kicker (ejection kicker optional) Technical features: Feed system motorized adjustment brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. Carbide blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Minimum bar width mm.40 min. Workpiece thickness 15 mm Further options on request

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Storage location: Nattheim Crsln Tlswhrvajizsb

Condition: excellent (used), Year of construction: 1996, Striebig Standard TRK 6206 Year 1996 max. cutting width : 5300 mm max. cutting height : 2060 mm saw blade diameter : 300 mm max. machining thickness : 80 mm saw blade bore : 30 mm Csln Tljpwf U Asizorb tilting saw head : manual saw feed : manual saw blade speed : 4750 min-1 slatted frame : can be moved out of the way mounting : free standing suction : external suction locking saw bar : manual weight approx. : 1200 kg dimension 6250x1500x2900 mm engine power : 4.3 kW Location : Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2018, Sliding table: 3200 mm CNC parallel stop Parallel stop: 1000 mm Motor power: 5.5 kW Vario drive Continuous speed: 2000-6000 rpm 3-axis Rapido Plus scoring unit including parking position and LED display Extended cutting height Table extension Front support roller Angle miter stop DIGIT LD Template holder Colowhlxuon Tlizerb Storage location: Supplier