Condition: good (used), Hacksaw RUCOCO RSR 500-4 Dsb Exnisvc Dnxe Rekl -sawing diameter 500mm -stroke rates 34-48-60-85 strokes/min -miter cutting device -Replacement saw blade 850x75mm -Machine feet -roller conveyor -Coolant device -Documentation Dimensions: LxWxH 2,2x1,1x1,5 meter / weight 2750Kg Errors / input errors excepted

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Semi-automatic glass cutting machine with mechanical measuring device. Dksbstqlpnj Exni Rol

Condition: not inspected (used), Year of construction: 2015, machine/vehicle number: F00112, 6500 mm jaw feed Remaining piece flap strip deviation control Micronizer Dkebogwq Ige Exni Rsl SLE 600 Extension version M330 3M Vertical roller VR-M Remaining piece remover DSTV interface

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0799140181, cutting length (max.): 4,500 mm, saw blade diameter: 380 mm, Double mitre saw DG 79 used, year of manufacture 2018, mat. no. 0799140181 - Cutting length 4500mm - Saw blade diameter 380 mm - Swivel range from 0° - 45° infinitely adjustable to the left and right, therefore external and internal dimension cuts possible - Locking points at 15.0°, 30.0° and 45.0° - Hydropneumatic saw feed for precise saw cut - Infinitely variable with rapid traverse - Vertical and horizontal pneumatic material material clamping devices ensure optimum profile fixing Electronics E 111 - Manual cutting length adjustment with digital display - Switchover from absolute dimension to chain dimension - Actual value storage of the display when the power is switched off Technical data: - Smallest cutting length: 520 mm - Voltage: 400 V, 3 PH, 50 Hz - Power output per motor: 3000 W / 4.1 HP - Compressed air connection: 7 bar - Air consumption per work cycle without spraying: 35 l with spraying: 45 l Dkjbeu Hhmds Exni Rol Accessories supplied: - 2 HM saw blades (used) - Dosing spray device - Mobile workpiece support - Profi S3 mobile extraction unit

Condition: excellent (used), saw band length: 6,300 mm, total height: 41 mm, Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. Guidance of the saw unit via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The control system offers simple machine operation. The length can be set via a counter with 0.1 mm resolution. The number of pieces is set via a piece counter, which switches the machine off when the number of pieces is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. Djb Exnijt Tvqio Rekl KASTO - fully hydraulic horizontal bandsawing machine HBA 420 AU CNC ( 420 mm x420 mm /Ø 420 mm) Fully hydraulic high-performance bandsawing machine in heavy-duty design, with horizontal parallel moving band saw blade, for cutting profiles, tubes and solid material in all qualities, including grades, including extremely difficult-to-cut materials (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit in solid design made of polymer concrete, thus ensuring maximum running smooth running and long service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw blade guides. Material clamping via two horizontal frame vices. Material feed via a non-driven roller conveyor integrated in the machine with twelve transport rollers. transport rollers integrated in the machine, making it easy to transport short offcuts. Cutting range round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed infinitely variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction infinitely adjustable Material support height 700 mm Saw blade dimensions 6300x41x1.3 mm Shortest cut-off length in automatic mode 6 mm Remaining piece length in automatic mode 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg Year of construction 1989 Accessories: chip conveyor, coolant device

Condition: good (used), Year of construction: 2004, saw band length: 2,530 mm, saw band width: 20 mm, For details see description and pictures; Dkoboqqh N Ao Exni Rsl incl. mobile base frame and roller table incl. 3 pieces of completely new saw blades - dimensions 2540 x 20 x 0.9 mm

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 26045, saw blade diameter: 420 mm, It performs cuts with double angle. It is supplied complete with input roller conveyor and output roller conveyor equipped with measurement reader. Dkob Exniev Hfc Ej Rsl

Condition: new, Year of construction: 2024, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Dkob Est D Azcjxni Rol Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Item number supplier: 3951407 Saw blade speed: 20 - 80 m/min. Saw blade length: 2865 mm Djb Exoth Ugyeni Rskl max. cutting height: 205 mm throat: 356 mm table width: 500 mm Working height: 990 mm

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Dkobeuw T Sts Exni Rjl Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: excellent (used), Technical data: Bandsaws KASTOdisc Deboucnuwe Exni Rjkl Machine type M7 Technical Data Cutting area 135x80 mm Drive power saw gear. 1.3-1.8 KW Cutting speed 33/60 m/min Saw feed Hydraulic Manuel Saw blade dimensions 315x2.5x32 mm Material support. with base frame mm Machine dimensions Length/width 600x800 mm Height 950 mm Weight of the machine 270 kg

Condition: new, Machine in stock and immediately available Double mitre metal band saw S 255 DG cutting range round / square 90°: 255 mm / 210 x 210 mm cutting range flat 90°: 310 x 210 mm Cutting range round / square 45°, right: 220 mm / 210 x 210 mm Cutting range flat 45°, right: 220 x 200 mm Cutting range round / square 45°, left: 230 mm / 200 x 200 mm Cutting range flat 45°, left: 230 x 200 mm Cutting range round / square 60°, right: 135 mm / 135 x 135 mm Cutting range flat 60°, right: 135 x 135 mm saw blade dimension: 2750 x 27 x 0,9 mm cutting speeds: 35 / 70 m/min Motor input power S6 40%: 2,2 kW working height: 930 mm Scope of delivery: Dkob Eed R Sipoxni Rel - Saw blade - material stop - Manometer (band tension) - Saw band carbide guides - Vice with quick clamp - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic limit switch - Underframe

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, saw band length: 2,700 mm, saw band width: 27 mm, Features: - solid saw frame made of cast steel - miter cuts 0° - 60° right and 0° - 45° left - hard metal saw blade guides - manual vice with quick-release lever - movable vice - mechanical blade tension with electrical blade monitoring - ergonomically arranged controls Technical data: Motor power 1.3 kW Belt speed 35/70 m/min. Vice clamping width 275 mm Belt dimensions 2700x27x0.9 mm Electric coolant pump 0.06 kW Working height 990 mm Machine weight 424 kg Deb Exnevpuqksi Rskl Machine dimensions WxDxH 0.9x1.45x1.6 m Cutting range: Round Square Rectangle 90° 240 mm 240x240 mm 310x200 mm 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm 45° L 150 mm 135x135 mm 145x125 mm

Condition: new, Year of construction: 2024, 2-column guided band saw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP no. 0491120) Particularly suitable for universal use with different cross-sections cross-sections, materials and frequently changing miter cuts. Center of rotation remains unchanged at every angle setting, thus exact length measurement at 90° and in the miter area. MEBA Eco-Saw-Innovation 2000 The universally applicable MEBA 335 DG mitre band sawing machine is ergonomically perfected and has an optimum price-performance ratio. Simple central operation. The machine control system complies with CE standard 89/289 Technical data: Cutting range: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit - Saw band 3 kW ; 400 V, 50 Hz - Hydraulics 0.55kW - Coolant pump 0.11kW Saw frame feed: infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without set-up elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Subject to technical changes. Basic equipment of the MEBA 335 DG-500 Semi-automatic sawing sequence with workpiece clamping-sawing-up to set height after cutting is complete MEBA high-performance package: Infinitely variable hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital reading with 0.1° accuracy Rapid traverse lowering of the saw frame via pushbutton up to the material edge Patented double mitre system (ERP no. 0491120) Unique double mitre bandsaw with which mitres on both sides can be set simply and economically by swivelling the saw frame and the material support. Dob Ejt Dpw Rexni Rekl Automatic movement of the clamping vices and digital miter adjustment The material clamping vise moves automatically in the direction of flow according to the desired miter, so the material is always clamped at right angles, close to the saw band. The mitre pivot point is the intersection point between the saw blade and the fixed clamping jaw, which means that the length dimension does not change when the angle position changes. Hydraulic full-stroke workpiece clamping. Quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Stable two-column linear saw frame Saw blade set at a 3° angle to the material support surface. Central machine operation Saw frame clearance height adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Rotating chip cleaning brush Saw blade tension with torque wrench Operating instructions and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Year of construction: 2025, NEW MACHINE Please ask for delivery time! Item number supplier: 3951610 Saw blade speed: 20 - 80; 250 - 1000 m/min. saw blade length: 3140 mm max. cutting height: 255 mm Dsbjtddz Hs Exni Rjkl throat: 396 mm table width: 600 mm Working height: 1000 mm

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: D0100105, saw blade diameter: 400 mm, feed length X-axis: 600 mm, FOM Industrie - Mirage. Automatic pneumatic feeder. Feed of 1 aluminum profile and saw on small pieces. Dksb Exnov Etc Rji Rjl year 2006, working condition - good.

Year of construction: 1992, Condition: reconditioned (used), The fully hydraulic production hacksaw has a universal hydraulic system for cutting thin and thick-walled profiles as well as solid material exclusively or alternately without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, equipped as standard with infinitely variable mitre device as standard. Lifting of the saw bow in rapid motion. Pendulum vice for perfect saw blade utilisation. Longitudinal guide with ground and hardened guide rails for transferring the cutting pressure forces to the saw bow. Automatic limit stop. Push button operation for functions on, off and upward movement of the saw bow. Manufacturer KASTO Metal hacksaw Machine type EBS 360 U Drive power: 4,4 KW Stroke rates: 37/51/74/102 min Dsb Eeh Ug Egoxni Rskl Cutting speed: 14/20/28/39 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 660 mm Cutting range flat: 360x200 mm Mitre 0-45 ° Material support height: 500 mm Weight: 820 kg. Length/width: 1915x750 mm Height: 1090 mm Saw blade dimension: 550x45x2 mm Accessories. Coolant system The function of the machines has been checked and repaired. If you have any questions, please do not hesitate to contact us. If you need a different cutting range, please let us know, as we still have other machines in stock. We reserve the right of ownership until all our claims have been paid in full. With kind regards Michael Maurath

Condition: new, Year of construction: 2025, 2-column-linear guided saw frame Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Central and easy to use control panel Adjustable saw frame height by sensor system Saw frame mounted over working surface, thereby guidance is clear Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Mounting elements Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Digital mitre display 90°- 30° Centre of rotation is at intersection of saw blade and fixed vice line, there is no change in measurement at any mitre angle Integrated roller support 2000 mm Dkeb Exnjbi S E Rsi Rjl Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut Chip box inside Environmentally-friendly micro spray lubrication system Model Semi-automatic Miter 90° Ø 260mm, square 300x260mm 45° right Ø 240mm, square 220x260mm 30° right Ø 140mm, square 140x200mm Motor: [kW] 1,5 Saw blade: [mm] 3350x27x0,9 Speed: 15-150 m/min Working height:[mm] 750

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, saw band length: 3,420 mm, saw band width: 9 mm, total height: 27 mm, coolant pump power: 80 W, Semi-automatic metal band saw (fully hydraulic) for miter cuts from 0° to 60° right and 0° to 45° left -3-part saw frame: 1. Die-cast aluminum on the front to reduce weight and vibration dampening 2. Traverse made of rectangular steel tube 120x100x4 mm 3. Cast steel on the motor side to reduce vibration -solid substructure with integrated 40 l coolant tank -Hydraulic lowering of the saw frame, continuously adjustable via a flow regulator -Automatic raising of the saw frame after the end of the cut; the lifting is automatic up to the last starting position, which saves time due to unnecessary "air sawing" -solid, hydraulic vice, can be moved on linear guides -mechanical saw blade tension with electrical blade monitoring -gear reduction gear with slanted, hardened and ground teeth -drive roller fastening using an adjusting nut -infinitely variable blade speed from 16 - 100 m/min Dsb Exjvph Hfjni Rjkl -hard metal blade guides -solid rotary table with cutting channel to prevent damage to the table. -engraved degree scale -mechanical miter stops at 0°, 45° and 65° -chip removal brush integrated in the saw blade guard -electric coolant pump and coolant shut-off valves on each blade guide block -ergonomically arranged control panel -24 volt control

Condition: new, Year of construction: 2024, Patented miter system Infinitely variable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic clamping of the material Powerful frequency controlled saw blade drive Swivel range 30° right / 45° left Cutting range in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° r. round 360, flat 420 x 360 30° r. round 300, flat 300 x 300 Remaining piece length without bundle tension 60mm incl. the special accessories Microspraying device laser light clamping pressure regulator driven chip brush manual lifting roller Set-up elements Dkob Esh S Nxpsxni Rjl

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Item number supplier: 3952013 Saw blade speed: 15 - 120; 190 - 1500 m/min. Dkebsth Uh Us Exni Rjl Saw blade length: 3950 mm max. cutting height: 330 mm throat: 503 mm Table width: 700 mm Working height: 990 mm

Condition: new, Year of construction: 2025, MEBAbase: The must-have for doers. The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone. The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop. The universally applicable MEBAbase 24 DG mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio. Simple centralised operation. Technical data Cutting range 90° - 240 - 310x240 45°l. - 200 - 200x200 45°r. - 200 - 200x200 30°r. - 140 - 200x140 Remaining piece length 60mm Cutting speed 35 and 75m/min pole switchable Drive - saw blade 1.10/1.8kW; 3 x 400V, 50Hz Saw frame feed Infinitely variable up to 200mm/min, hydraulically adjustable Saw blade tension Mechanical Saw blade dimensions 2910 x 27 x 0.9mm Working height 900mm (without set-up elements) Weight 470kg Dimensions 800 x 1750 x 1500mm Basic equipment of the MEBAbase 24 DG MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. Manual mitre adjustment from 90° - 30°, infinitely variable according to scale to 1.0° accuracy The mitre pivot point is the intersection point between the saw blade and the material system, which is why the length dimension does not change when the angle is changed End stops at 30° - 45° - 90° - 45° Hydraulic quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame. Centralised machine operation Cutting pressure reduction due to the dead weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight equalisation spring Saw blade drive with limit stop Stepless clamping jaw adjustment Movable band guide arm, adjustment to material width Saw blade deflection roller carbide guide Practical chip collection tray with drip tray Dkob Esnfvl Soxni Rol Rotating chip cleaning brush Mechanical saw blade tensioning Operating instructions and spare parts list (digital) 1 MEBA bimetal band saw blade 4/6 ZpZ mounted on machine Complete coolant system Paint finish anthracite (RAL 7016) Subject to technical changes. You will receive details of the exact delivery time in the order confirmation.

Condition: new, Year of construction: 2024, 2-column guided automatic metal band saw with infinitely variable miter adjustment of 90°- 45°- 30°. Particularly suitable for universal use with different cross-sections, materials and frequently changing miter cuts. Center of rotation unchanged at any angle setting, thus exact length measurement at 90° and in the miter range. Technical data: Cutting range: 90° round 335mm, flat 500x335mm Dsb Ejh S Nxzsxni Rekl 45° right 330mm, flat 320x335mm 30° right 200mm, flat 200x335mm Cut-off length: Single stroke up to 600mm, multiple stroke up to 6000mm. Cutting speed: AC frequency controlled drive 15-150 m/min infinitely variable at the control panel with the following additional equipment: Control panel free standing incl. the special accessories micro spraying device laser light Clamping pressure regulator 7" CE panel Set-up elements

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-135° The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does not change with the mitre angle Digital mitre display, accuracy 0.1° Fast material clamping. Material is always clamped at 90° regardless of the angle to be cut Hydraulic material clamping via full-stroke clamp MEBA – Power-Package “HSS“ Hydraulic lifting and lowering of the saw frame hydraulic Dksb Exobrq Txsni Rjl clamping of the material stepless, hydraulic cutting pressure- and feed regulator display of lowering speed via scale display of cutting pressure via manometer rapid lowering of the s aw frame via button until material edge Complete coolant equipment with electro-pump Chip box Saw blade drive with end of cut stop Combined precise saw blade carbide-roller guidance with saw blade brush Instruction manual and spare parts list on CD-ROM Frequency regulated AC-drive 15-150 m/min, 3 kW Colour silvergrey/ bluegrey (RAL 7001 / RAL 7031) 1 saw blade 4/6 tpi Additional standard equipment for 405 DG --ᐳ Control panel separately mounted Model Semi-Automatic Miter 90° Ø 325mm, square 500x300mm 45° right Ø 360mm, square 300x300mm 30° right Ø 200mm, square 200x200mm 45° left Ø 300mm, square 300x300m Motor:[kW]3 Blade:[mm]4200x34x1,1 Blade speed: 15-150 m/min Working heigt:[mm]750

Condition: new, Year of construction: 2023, 50 A is a single head miter saw coming from below with saw blade ø 500 mm. The saw table can be adjusted in the angle of +/- 22,5° and is equipped with 7 fixed angles in the "A" version (manual). The angle reading for setting the intermediate degrees is provided by a scale directly on the saw table. Dsb Exjhmfhfeni Rekl The sturdy steel and cast iron construction is ideal for industrial use thanks to a saw motor with 4 kW power and a minimum spray. Profile clamping is ensured by a pair of horizontal and vertical clamping cylinders with high/low pressure system. See also our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.