Used spot welding machines for sale (138)

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Lodpshpf Iyjfx Afwehk Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Lhodpfx Afjycv Saowjk Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V Lodeu A Dg Eepfx Afwehk with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: like new (used), Water-cooled spot welding unit, mobile Rated power at 50% duty cycle: 100 kVA Lhsdpfx Afjhlhh Aewek Secondary short-circuit current: 9.5 kA Secondary open-circuit voltage: 14-18 V with secondary cable for welding electrode and counter electrode, 3000 mm long Synchronous welding control with pulse operation T-1050 / 8 Main switch Weight: 300 kg

Condition: excellent (used), Water-cooled, manually operated DALEX spot welding tongs Type 3218 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN with cardan suspension and mounting bracket 1 pair of electrode arms, 170 mm reach included: DALEX synchronous welding control unit RS 12 Lhedpsf Hi A Ejfx Afwjk Power control via phase angle control Weld time 1-99, adjustable in synchronisation with connecting cable and 32 A CE plug and main switch

Condition: good (used), Projection welding machine Make DALEX Type PMS 16-1 Projection: 350 mm Rated power at 50 % ED: 250 kVA Sec. short-circuit current: 110 kA Sec. open circuit voltage: 12.5 V Electrode force: 340-2,040 daN with double stroke cylinder and feed stroke with synchronous welding control 5/36 TT Weight: 988 kg function-tested Lhsdpfxsubdato Afwok Machine is still being refurbished

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs for industrial applications Type DALEX 3427 D Lodpfogibv Eox Afwjhk Nominal power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN with double-acting cylinder - long stroke 62 mm - pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with universal joint suspension and suspension bracket 10 m connection cable and control cable Electrode arms 350 mm Arm spacing 170 mm with synchronous welding control 15036

Condition: refurbished (used), pneumatically operated spot welding machine DALEX, type PMS 10-4 arm reach 350 mm with EH cylinder, electrode force 65-390 daN rated power at 50% duty cycle: 50 kVA secondary short-circuit current: 34 kA secondary open-circuit voltage: 2.5-5.0 V with add-on control cabinet according to VDE 0100 main switch 4-stage switch synchronous welding control 8033 start via foot pedal weight 410 kg Lhodjhnh Etspfx Afwok

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm Lhsdpfehmvawex Afwok with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm Lodpeu Nv Emsfx Afwohk arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: like new (used), Year of construction: 2020, Power at 50%: 25kVA Short circuit-current: 18kA Electrode force: 240daN Throat depth: 230-550mm --- Weld control: TE101 (13-parameters, 99-program) --- Extra Equipment: Lhsdpfxozgxfie Afwok - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA Lhedpfx Afjzh Izcswjk - Fuse rating 125A - Outreach 670mm - Arm spacing 350mm - Electrode force 500daN - Stroke approx. 30mm - Control unit TE500 with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function - Language selection: German, English, Italian, French, etc. with operating manual - 2-stage foot switch according to UVV standards - Main machine switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with wiring diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an additional cost The system is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed based on actual effort.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Lodpfx Afjy Snycewshk

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Lhedpfsy N Dukjx Afwjk Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation Lodpfxoxrb Tgs Afwshk - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Lsdpetvpilofx Afwehk We also have a number of single point welding machines for steel wires.

Condition: good (used), nominal power at 50% duty cycle: 50 kVA, - Power 50 kVA - Pneumatic - Throat depth 425 mm - PX 1500 Plus control Lsdpjyda Dvjfx Afwshk - 400V

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off Lsdpfx Aocxxwnofwehk

Condition: good (used), Peco welding machine spot welding machine Peco welding machine welding flat strip and electric cable Peco LA 40 air control Bosch E35...DYF welding controller More welding machines in other sizes - new and used - you will find in our store! Lhjdpfx Aeivappefwsk International shipping costs on request!

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Lhsdpfxel Smn Se Afwek Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* Lsdpfxjq H Aqxo Afwohk - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Dalex-Werke Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Ljdog Rcpxopfx Afwshk Machine weight: 341 kg

Year of construction: 1970, condition: used, Spot welding machine Lhsdpfx Aok Tt Hfefwsk Manufacturer: Dalex Type: SF 16 Continuous power output: 16 kVA at 50% duty cycle.

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm Ljdsz H Dyjpfx Afwshk weight: 750 kg

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm spark plug air gap: 120 mm Lhjdsbh Nxrepfx Afwek welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg