Used straightening-, and bending machines for sale (83)

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench Cgjdpfx Aasxcux Roaor - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Year of construction: 2023, condition: new, DPM 1070 x 150ton Hydraulic Garage Press Cap: 100ton Many other sizes and capacities available. Csdegyta Hopfx Aaajgr • Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ) • Adjustable table height • Table up-down movement attachment • Control with special joystick • Right- Left moving piston by hand (DK) • Built According to EC Safety Directives and has CE • User’s manual

Condition: excellent (used), Hydraulic straightening press Brand: S.A.R.L. Constructeur Capacity: 90 t Maximum installation height: 1000 mm Stroke: 450 mm Table diameter: 600 mm Internal width: 1000 mm 380 Volt Csdpfx Asywh Dfjaajgr Year of manufacture: 2007 Transport dimensions: Length: 1600 mm Width: 650 mm Height: 2430 mm Weight: 900 kg

Condition: new, square edge steel 20x20 / 25x25 mm Codsxcuyhspfx Aaaogr flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Cgodpfx Aovgcpceaajr Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel Codpfx Aaoyxnzysasgr - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,000 × 2,000 mm Table, 1,000 mm Clear Height The machine shown here was built and delivered as a custom order. We can manufacture this machine for you on short notice – taking individual options into account. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and processing of large-format components. Base price: €102,000 net Optional Equipment (on request): Csdpfx Aajyxnw Ujasgr The listed options are based on realized customer projects and allow precise adaptation of the machine to your specific application. The base machine is a functional standard version, which in practice is usually enhanced with additional features and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 controller with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various versions) ==== Technical Data & Information: ==== General Specifications Type: Portal Press Pressing force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Clear height: 1,000 mm Frame gap: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder movement: ±900 mm Portal longitudinal travel: 2,500 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: lever control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Features - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-component coating (RAL colors selectable) ===== For straightening steel structures, vehicle manufacturing, maintenance, assembly work, special constructions Portal press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 1989, pressure 16 t throat 200 mm stroke 160 mm dayligth 490 mm Cedpfeyx Ii Rsx Aaaogr table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1975, pressure 40 t throat 280 mm stroke 160 mm dayligth 420 mm table surface area 2000 x 500 mm table height over floor 870 mm ram surface 85 mm power requirement 7,5 kW weight of the machine ca. 3,2 t required space 1,7 x 2,0 x 2,3 m Csdpfx Aaeyx Ihasaogr with oilhydraulic drive, shaft straightening device, manual lever control can be inspected in running condition in our warehouse

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths Cgedpfjxrb Nbox Aaaor - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: good (used), Year of construction: 2011, Pressure 160 t Cgodjyx Tpcjpfx Aaaor Total power requirement 18.5 kW Machine weight approx. 13.5 t

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Cjdpfx Ajh Agnusaajgr BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Cgedpfx Aehyc Nwoaajr Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob Cgedpfx Ajyia D Rsaaer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm Cedpfjyghvfsx Aaaegr ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec Csdpfofxyigjx Aaaogr :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t Codpod Ttydjfx Aaaegr

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge Cgodpfx Aoymf Nvoaasr - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW Csdpfeymf Ilsx Aaaegr weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, Year of construction: 1966, pressure 10 t table surface area 1.800 x 205 mm ram stroke 150 mm ram head width 50 mm throat 150 mm quantity of oil 75 l connected load 380 V / 50 Hz Cjdpfx Aeymp R Rsaasgr dimensions of the machine ca. 2,0 x 1,0 x 2,10 m Straightening Press EITEL - RP 10

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Cedefxygwopfx Aaajgr space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. Codpfx Ajf Sqckeaasgr The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible. Csdpfx Aexldiqoaasgr

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Cgodpfx Aokvmi Sjaaer Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2019, machine/vehicle number: DF0369, pressing force: 220 t, pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm Cgedpfx Aajfxyivsasr :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON