Used surface finishing machines for sale (171)

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 Hsdpfx Astq E N Eebvjni The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2025, condition: new, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,500 mm, door opening width: 3,450 mm, door opening height: 2,780 mm, inner dimension height: 2,800 mm, inner dimension length: 6,920 mm, inner dimension width: 3,920 mm, volume flow: 30,000 m³/h, machine/vehicle number: TEC/PR/15, PRISMATEC 15 represents a new generation of spray booth systems — combining mechanical precision, modular European design, and intelligent process control powered by AI. Developed for both industrial and professional finishing environments, it ensures a stable process, exceptional energy efficiency, and consistent surface quality. Each system is fully Industry 4.0-ready, with native integration into ERP / MES / QMS / SCADA environments. Key Features Hnodoxv D Sgjpfx Abvoi - Construction & Insulation: PIR sandwich panels (walls and ceiling), galvanized 1.5 mm steel frame, aluminum doors and panels, raised grid floor and platform (300 mm) for optimal airflow and structural durability. - Ventilation: Dual NICOTRA-GEBHARDT centrifugal fans, providing balanced pressure and uniform air distribution throughout the booth. Equipped with motors ranging from 7.5 kW to 11 kW, delivering total airflow from 25 000 m³/h up to 35 000 m³/h at a static pressure of 800 Pa (for both supply and exhaust systems). - Smart Control (NVIDIA AI-Edge): 14″ industrial HMI, real-time AI algorithms for temperature, pressure, and airflow control; Gun-Idle ECO mode, predictive diagnostics, full data logging, and open API (REST) compatibility via Modbus TCP / OPC UA / MQTT. Seamless integration with ERP, MES, and QMS systems for traceability and predictive maintenance. - Thermal Monitoring (optional): AI-based infrared imaging with object recognition (YOLO), automatic heat mapping, and adaptive curing profiles for reduced energy consumption. - Lighting: Programmable Daylight LED system with precise CRI and brightness control, 45° side and ceiling fixtures ensuring shadow-free illumination. - Heating System: Stainless-steel heat exchanger (oil version) with optional gas / oil / electric sources; heating time to 60 °C ≈ 4–5 min; up to 30 % energy saving through AI-based heat recovery. - Design Details: Hidden lock system (no protruding parts) for easy cleaning, foil application, and minimal maintenance. Model Range PRISMATEC 15/18/22 (7×4 m) – compact, high-efficiency configuration for workshops and industrial applications; full AI-Edge control. LS22 / Custom Series – available upon request for robotic integration, conveyors, or multi-zone temperature control. Connectivity & Reporting Direct ERP / MES / QMS integration (open API). Automated production, energy, and quality reports with OEE / KPI dashboards. Remote diagnostics, data visualization, and cloud management via TEC NOVA AI Cloud. Compliance & Certification Fully European-built, compliant with Industry 4.0 standards. Structural and welding quality certified under EN 1090-1 and EN ISO 3834-3 (TÜV Thüringen Polska). Available Options - Infrared + AI thermal monitoring - Advanced analytics & remote support - Presets for water-based paints - ECO Gun-Idle mode - Robotic or conveyor integration - Multi-zone thermal control (Custom Series)

Condition: refurbished (used), Year of construction: 2001, XXL-Center RAS 75.06 - General technical data (in mm): Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Hnedpfxjx Hf Tve Abvsi Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper jaws travel range: 10 – 750 mm Clearance in front of jaws up to: 300° Extendable loading tables: yes Gripper jaws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2001 Condition: To be completely overhauled - Images are for reference only -

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Hodpsnl Ekrofx Abveni Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: good (used), Dimensions of the blasting cabin approx.: - 1.40 m wide Hnedswtyd Aspfx Abvji - 1.65 m high - 1.00 m deep Dimensions of the extraction unit approx.: - 0.7 m wide - 2.60 m high - 0.8 m deep

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Width: 1820 mm Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Hnjdpox Hgvlefx Abvji Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Year of construction: 2002, condition: used, Technical details: control: Soft - PLC burner heads: 1 Stück Distance between centres: ca. 4000 mm Rotary-table: Ø 890 mm Rotary-table: drehbar 360° mm Rotary-table: schwenkbar: 130° mm electrics - voltage/frequency: 3x400 V / 50 Hz V/Hz total power requirement: ca. 22 kVA weight of the machine ca.: 5,0 t dimensions L x W x H: 5,7 x 2,4 x 2,8 m dimensions electric cabinet: 1600 x 640 x 1500 mm PTA-welding, Plasma coating system Plasmabeschichtungsanlage mit 8-Achsen Performance: Coating of sealing plates, seat rings, cones, tapered spindles and other wear parts. Powder dosing system: -control process control system / adjustment of the powder quantity -Powder quantity approx. 10kg, powder grain size 25µ - 500µ -Quantity regulation of the powder dosage Current source: -control MOSFET; rangePilot max. 200A and Tranfer 300A -digital display -air cooled -control 0-10V / 0-20mA Plasma torch: -water cooled Hnjdeu Nwf Iepfx Abvoi -continuous power P max. pilot 100A and transfer 300A High frequency ignition unit: -HF generator for arc ignition Gas control system: -process controlled for fully automatic flow. -plasma gas system flow unit electrically controllable -gas = Argon 99.99 pure gas -flow rate plasma gas system 0,05 - 5 l/min.; powder gas system 0,50 - 20 l/min.; protective gas system 1,50 - 30 l/min. Support stand with moving tip Water cooling unit Control panel Housing *

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm Hnsdpfsu Nu I Tex Abvei - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Hedpjyap Icefx Abvoni Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 1980, condition: used, Technical Specification Manufacturer: Sledum (Netherlands) Model: RG-270 Crankshaft Grinding Machine Manufacturing period: Industrial design from the 1970s–1980s The Sledum RG-270 is a high-precision, industrial-grade crankshaft grinding machine engineered for precision grinding of main and pin journals on crankshafts and similar rotating components used in internal combustion engines. The machine features a robust cast-iron bed, providing high stability and excellent vibration damping. Its design allows for uniform and highly accurate machining of large crankshafts. Hsdpfxjyrpu Tj Abveni Main technical features: • Distance between centers: 2000 mm • Maximum swing diameter: 270–275 mm • Workpiece types: crankshafts, shafts, eccentric rotating components • Grinding spindle mounted with high-rigidity bearings • Cross and longitudinal slides with fine feed adjustment • Machine bed equipped with precision guideways • Adjustable steady rest system for stable support of long workpieces • High-performance grinding motor intended for industrial continuous operation • Manually operated feed and positioning system • Stable, vibration-dampened industrial machine frame • Coolant system preparation • Heavy-duty industrial construction designed for long service life

Year of construction: 1999, condition: good (used), functionality: fully functional, OTEC DF70 drag finishing machine for sale in good condition. Various tool holders included, including one 8-position holder with independent rotation. 2 process containers included—optionally available with various grinding/polishing media. Speed control via frequency inverter. Hnodpfx Ajydqf Robvei With drag finishing systems you can, for example: - achieve precise edge rounding in the micrometer range on milling tools - polish forming tools - polish watch parts and jewelry #dragfinishingmachine #massfinishingmachine #dragfinishing #surfacefinishing #edgepreparation #surffinishing #streamfinishing #OTEC #Rösler #massfinishing

Condition: good (used), Manufacturer: Graul Process: Electrolytic Polishing Process Sequence: E-polishing, multiple rinsing cycles Cycle Time: variable Maximum Load Weight: 50 kg Heating: electric Preheating Time: 3 to 4 hours Polishing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Usable dimensions: 770 x 200 x 400 mm Volume capacity: 315 l Heating power: 2.9 kW Rectifier Maximum DC output: 500 A Power consumption: 13.1 kW Dimensions: 490 x 300 x 912 mm Weight: 48 kg Single Rinsing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Volume capacity: 315 l Manual Rinsing Station Internal dimensions: 970 x 600 x 700 mm, open at the front Hedpfx Aboycid Njvsni External dimensions: 1,170 x 670 x 850 mm Total connected load: 17 kW Condition: ready for operation

Condition: ready for operation (used), HGH 6040 DUO Sandblasting Cabinet Manufacturer: HGH Model: 60 40 DUO External dimensions: approx. 1300mm x 720mm x 1350mm (W x D x H) Working area: 590mm x 400mm x 250mm (W x D x H) | 590mm x 400mm x 250mm (W x D x H) Weight: approx. 120 kg You are welcome to arrange a viewing appointment. Hnjdpfxjyba Ays Abvji We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Year of construction: 2026, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. Hnedpfx Aovugxwsbvoi The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Hnedpfx Aev R Tihjbvoi Dimensions: 1050 x 600 x 850 mm

Condition: like new (used), Year of construction: 2019, operating hours: 454 h, functionality: fully functional, machine/vehicle number: 7438, drilling depth: 3,000 mm, total length: 11,515 mm, total width: 5,415 mm, total height: 2,350 mm, workpiece weight (max.): 2,500 kg, overall weight: 14,450 kg, spindle speed (min.): 13 rpm, spindle speed (max.): 1,800 rpm, rapid traverse Z-axis: 6,000 m/min, type of input current: AC, input voltage: 400 V, Skive burnishing machine, for finishing the inner surfaces of tubes by combining two processes in one pass: material removal (skiving) and surface hardening/smoothing (roller burnishing). It achieves exceptional surface finishes (Ra 0.1–0.4). Tube is fixed and the tool rotates. Hedexzq Ryspfx Abvoni This machine cannot be used for deep-drilling, boring, honing. Machine in excellent conditions due to very limited usage: 454 hours. Tooling of diameters 40-50-63-80-90-100-110-140 are available and included in the price. Selling because of business change.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S/1-085-0603, operating pressure: 7 bar, total width: 1,500 mm, total height: 1,800 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 450 kg, inner dimension width: 600 mm, inner dimension length: 1,000 mm, inner dimension height: 750 mm, Equipment: cabin, documentation/manual, lighting, Sandblasting plant MHG SMG 45 incl. movable rotary table. - Movable rotary table and roller conveyor - Working area 1000x600x750 mm - Work gloves - Two side doors, dust-tight closure - Double-walled, noise-insulated with foam - On/off extraction and lighting - Pressure regulator, manometer, and foot switch - Viewing window Dimensions: LxWxH 1.5x1.5x1.8 m / Weight 380 kg Hnedpjx Swimsfx Abvei

Year of construction: 1998, condition: excellent (used), 1 x centrifuge Aryma / Rimann 2.5 LIT year of construction: 1998 with open basket in optical and technical perfect condition Hnedpjigni Isfx Abvei Technical data: Max. Charging: 3 Kg/2,5 l The machine can be viewed at any time with pleasure under power.

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Hjdpfelbmm Ejx Abvsni Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. Hedpfxoiq I Nlo Abvsni The handling of the machines is easy to learn.

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling, and cleaning of materials and components. These are absolute professional-grade machines. Ideal for classic car restorations as well as use in the automotive, metal, and plastics industries. We are happy to assist you in finding the right solution and can test your application here at our factory. The operation of these machines is easy to learn. Hnsdpfx Ajwzv Dujbvsi

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). Hnedpfjwry R Tjx Abvji The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Hsdewrza Nspfx Abvjni Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg Hjdjwrzbgjpfx Abvoni The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Condition: new, Technical specification: - Chamber volume: 690 liters - power supply: 230V ~ / 50Hz - power of dedusting system: 1 200 watt - Nominal operating pressure: up to 10 bar - Cleaning capacity: up to 13 m2 / h - Cleaning degree: SA-2.0 (deep and extensive corrosion) - Air demand: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 1,500 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: vacuum BRAGO - Gun: vacuum CTR - Working area dimensions: 1 150x710x850 mm - Sight glass dimensions: 305x610 mm - Working table load: up to 250 kg - Lighting: LED, adjustable in the range of +/- 90 degrees (two parts) - coating protection: powder coating - Working temperature: - 10 to + 50 degrees Celsius - Common work table: Yes - Inspection valve: Yes - Weight: 195 kg The offer includes: - Land Reko SCI-690-10 chamber cleaner. - Dust removal system of the OP-1200 - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal - Pnematic connection Hnedpfx Aoft Sqbobvsi - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months warranty for entrepreneurs