Condition: new, Year of construction: 2025, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Bedeum Uflepfx Aaajwk Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2025, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: Bwjdpfx Aebqk Nbjaajk The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Year of construction: 2005, condition: used, functionality: limited functionality, Fischer / Stocker Electric Recirculating Oven with Blower, Year of manufacture: 2005 Upgraded 2022/23 including: - Additional insulation with cladding - Siemens control system with programmable selection and memory - Heat-resistant fan shaft, including repositioning of the fan unit within the chamber - Installation of three additional 1.5kW heating elements Connection load: 45kW Increased heating capacity from original +250°C to +450°C Bedpfx Aeyx H Swsaajwk Fully extendable slide-out floor Installation dimensions (D x W x H): 3,100mm x 2,750mm x 2,900mm (including attachments) Usable internal chamber dimensions (D x W x H): 2,500mm x 1,700mm x 1,500mm Originally used in GRP component production for aerospace parts, purchased second-hand by us in 2020 and modified as detailed above for curing/heat-setting paint jobs. Due to changing project requirements, this oven became too small for our needs and was never put into operation at our facility! Ideal for electrostatic and/or wet painting, tempering, or special applications! Electrically fully functional and thus immediately ready for operation. However, due to extended storage, partial touch-ups to adhesive seals (cladding) and door seals will likely be necessary! Price: net ex works, negotiable!

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Manufacturer: Ruscher Model: RU-FE Bwodpfexyyc Ajx Aaajk Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Dimensions Length: 11,000 mm Width: 800 mm Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: good (used), Year of construction: 2017, dispersion and UV varnishing sheet size min 152x152 mm max 760x760 mm Bwsdpfx Aasyv Dm Heask paper thickness 0.1 - 1.2 mm UV varnish dispersion varnish 120 g/m² without surface treatment and higher 150 g/m² with surface treatment and higher 200 g/m² with surface treatment and higher automatic setting time 5 minutes automatic washing time 10 minutes Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes 8.5” x 11” / 215 mm x 280 mm sheets width 12,700 sheets/hour 12” x 18” / 305 mm x 450 mm sheets width 9,900 sheets/hour 14” x 21” / 355 mm / 530 mm sheets width 8,800 sheets/hour 21” x 30” / 530 mm x 750 mm sheets width 6,300 sheets/hour 28” x 40” / 710 mm x 1020 mm sheets width 5,000 sheets/hour Painting speed 4,600 B2/hour anilox rollers for the machine 3;9;12;18 Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes UV drying IR drying (suitable for dispersion varnish and primer for HP Indigo) kit for processing thin materials varnish application using a chamber doctor blade high feeder 2 independent varnish circuits with automatic washing Anti-Ghost system innovated sheet delivery system

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Bsdpfx Aasyk S Uyjaewk Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.

Condition: used, Year of construction: 2018, total width: 1,400 mm, total height: 4,400 mm, total length: 1,500 mm, type of input current: three-phase, filter area: 56 m², suction capacity: 3,000 m³/h, intake manifold diameter: 250 mm, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum unit for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is positioned on the clean air side, minimizing the risk of explosion. The device was used with a shot blasting machine. Device in CE Ex ATEX II 3 D c -T3 version Technical data: Capacity – 3000 m³/h Filtration area – 56 m² Antistatic aluminized cartridge filter elements – 4 pcs Motor power – 4 kW Inlet diameter – 250 mm Complete with AIRCOM non-return valve – the most robust and resistant solution for safety management in explosion-hazard industrial environments, especially when metal dust is present. Dimensions: Height – 4.40 m Width – 1.40 m Depth – 1.50 m Bjdpfxjyt Dl Nj Aaaewk Stock no.: 1117

Year of construction: 2014, condition: like new (used), FOUR-BELT TWO-LINE FURNACE - Brand: IKEO (Italy), year 2014 o Inlet dimensions: 80*35 o Conveyor speed: 0.1 to 3 m/min o Heating chamber dimensions: 80*35*1140 o Cooling chamber dimensions: 80*35*1525 o Temperature: 1100°C o Conveyor belt made of thin stainless steel sheet o Atmosphere: Nitrogen + H2 or Argon o Power: 25 kW Bwedpfx Aoymdzqoaask This furnace will only be available in June. Viewings possible in Switzerland.

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system Bodsyn Inwopfx Aaaewk - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Bodpfx Aaedrtansaswk Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period. Bwodeynz Idopfx Aaaek

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t Bwsdpsupxd Dofx Aaask

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar dimensions 1,0 x 0,61 x 1,65 m Bwedpfx Ajupw Smeaaok 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Bwodpfeyqynuox Aaaek External reference: 7615

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Bwjdpfx Aaeyx Irljajk Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m Bwjdpfx Aeynr E Tsaajk - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Bsdpjynr E Hofx Aaaowk Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Bodpfx Asynr Emjaajwk Manufactured in Germany

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Bwsdsylm U Rjpfx Aaaek

Condition: excellent (used), functionality: fully functional, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2 in EXCELLENT condition. Purchased: 2023 (as-new condition) and only in operation for 6 months. Version: Professional Version (excellent feature set) - High speed coating up to 4x faster - 3 coating processes in one unit - Suitable for components up to 1200x570 mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital job-documentation system, currently under review) - Large paint tank capacity for tall components - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment subject to clarification), you can track at any point which component was produced, when, where, by whom, and how. All requirements regarding ISO/TS 16949 are fulfilled. When setting up a tool, the PDM system automatically recognizes all necessary parameters for coating. Work instructions, videos, technical data sheets, processing notes, etc. – everything at your fingertips! 19″ swivel smart touch panel Viscosity control Tool monitoring: automatic recognition and adjustment Electrically height-adjustable machine Coating processes: - Dip Coating (DipCoat) - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight carrier upon request. Bwjdjv I Tb Eopfx Aaaek #8300

Condition: ready for operation (used), Hornich ISK 800 SF Sandblasting Cabinet Injector Blast Cabinet Fine Blasting Unit Bwodpoyr Dlajfx Aaask Work Surface: W=740 mm D=480 mm H=360 mm Required Space: W=800 mm D=770 mm H=1480 mm Electrical Power Consumption: 220 V/50Hz, 400 watts Air Consumption: approx. 400 l/min depending on the air nozzle You are welcome to arrange a viewing. We can organize low-cost shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The stated company names and trademarks are the property of their respective owners and are used only for identification and product description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor Bwedpfsyxy D Tjx Aaajk - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Year of construction: 2026, condition: new, We manufacture blowers for air supply to factory halls, barns, or any location requiring substantial air exchange. The air intake can be fitted with one or two pipes, and an adjustable air inlet can also be installed. Air inlets are available with adjustment options or with flange outlets. The air outlet comes with a flange for connecting pipes that transport air either from or into a room. Upon request, we can produce custom inlet or outlet ends. We can also manufacture blowers without smooth, electronic motor speed control. Entire unit is hot-dip galvanized. Motor: 5.5 kW (7.5 kW available upon request), 2800 rpm. Fabrication of steel bends and pipes is also possible. Equipped with an electronic motor speed controller. Bwsdpfx Aaowt Ihcsaek Shipping or pickup in Poznań. Net price. Price may be subject to change. We also produce pneumatic dispensers for dispersed concrete reinforcement, pneumatic grain conveyors, joint cord inserters, joint cleaning machines, and several types of milling machines for joint chamfering, as well as trowels and concrete discs.

Condition: new, -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 2 LED panels -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 400V Bwsdpsnbd Iljfx Aaaek Supply: -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating - heating supply 12kW Filters - preliminary, cardboard, carbon Security: -Emergency stop -Pressure lock on the door Equipment: -16A socket -Air preparation team - Pneumatic retractor

Year of construction: 2012, condition: like new (used), functionality: fully functional, Rösler RSKI 1400-SAT – Satellite Indexing Blast Cabinet, Automatic, 2 Nozzles For sale is a near-mint Rösler injector blast cabinet, model RSKI 1400-SAT. This system is designed for the automatic blasting of small and medium batch series, making it ideal for components up to approximately 280 mm in diameter. Parts are evenly blasted via a rotating satellite table—ideal for cleaning, deburring, descaling, derusting, or roughening precision components. Once raw parts are loaded, the blasting time per satellite can be set at the control panel. After confirming raw part loading using the button directly next to the cabin door, the individual satellites index into position and are processed. Upon completion of the blasting cycle and after all parts have been treated, a finished message is displayed and the system can be reloaded and unloaded as needed. Thanks to the generously dimensioned integrated filtration technology, the blasting machine is suitable for virtually all types of blasting media, including finer mineral abrasives without issue. Originally used in medical technology, the interior of the system is lined with rubber. This presents no disadvantages for other industries or users; indeed, it provides additional wear protection for both media and machine and dampens noise. This means the unit operates both more efficiently and more quietly than an unlined cabin. By removing the front manual access cover, manual blasting can also be performed at any time with minimal setup effort. Additional nozzles can be retrofitted if required. Key technical data (excerpt): - Manufacturer: Rösler Oberflächentechnik GmbH - Model: RSKI 1400-SAT Satellite Blast Cabinet - Year of manufacture: 2012 - Blast system: Injector blasting with 2 boron carbide nozzles SPI 38 - Satellite rotary table with six workpiece holders - Power connection: 400 V, 3Ph/N/PE, 50 Hz Bjdpfxoyudhaj Aaaewk - Connected load: 4.0 kW - Main drive: 0.75 kW - Control voltage: 24 V DC - Separate control cabinet, operation via buttons/switches and foot pedal Your advantages at a glance: - Automatic satellite blast cabinet for series and precision components - Originally equipped for use in medical technology - Uniform all-round processing of parts without direct component contact - Two blast nozzles for excellent surface coverage and reduced processing times, with optional expansion - Large front door and viewing window for convenient loading and optimal process monitoring - Compact, rugged construction—easily integrated into existing production environments