Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 604348, functionality: unexamined, operating temperature: 100 °C, heating capacity: 9 kW (12.24 HP), No minimum price – guaranteed sale to the highest bidder! Tjdjyxc Tqepfx Abued TECHNICAL DETAILS Maximum drying temperature: 100 °C MACHINE DETAILS Dimensions LxWxH: 143 x 70 x 35 cm Type of heating: electric Electrical data Rated voltage: 400 V/230V 50 Hz Connected load: 11 kVA Heating capacity: 9 kW Rated current/Fuse protection: 16.5 A / 20 A Protection class: IP 43

Condition: good (used), Internal item no.: 25121 Tedpfx Aoyxpdcobued Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Tjdpfx Abjzdupleusd 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Tsdpfx Aszdc D Ssbujd Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model N81 Serial Number 72019 Year of Manufacture 1988 Tjdpozc Ihasfx Abujd Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 140 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 700 mm Todpfxszbrfte Abusd Compartment width: 850 mm Nr. Of turbines: 1 Power of turbine: 4 kW Max. turbine flow: 56 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES Max. installed power: app. 12 kW !!! NEW Rubber bel installed !!!

Condition: good (used), Tumble rubber belt blast machine Todpfx Aeza Eq Tobued Max. batch volume: 250 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 900 mm Compartment width: 930 mm Nr. Of turbines: 1 Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES 2.000 m3/h Max. installed power: app. 15 kW

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Max. workpiece load weight: 800 kg Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request. Todjy Nbm Depfx Abuod

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift Todpfx Ajyyxa Nobujd - Rotary table available as an option

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period. Tsdpoynz Idjfx Abujd

Condition: used, Year of construction: 2014, functionality: fully functional, workpiece height (max.): 1,500 mm, workpiece length (max.): 7,000 mm, ENGLISH: Powder Coating Line for Aluminum Profiles – Almost New, Fully Operational and Ready for Sale We are offering a complete automatic powder coating line by NYS Equipments Co., Ltd., very lightly used, fully operational, and currently in commercial production. This line is ideal for coating aluminum profiles up to 7,000 x 300 x 1,500 mm (L x W x H), with a production capacity of up to 15 jigs/hour. Key Technical Features: ✅ Process: Automatic electrostatic powder coating with 16 automatic and 4 manual corona-type guns ✅ Curing Oven: Gas-fired heating (RIELLO), 700,000 kcal/h capacity, internal dimensions 11.1 x 7.8 x 2.59 m, PID temperature control with ±2 °C precision ✅ Drying Oven: Gas heating (200,000 kcal/h), internal dimensions 8.0 x 1.5 x 2.3 m ✅ Conveyor System: Dual chain design with adjustable jigs (2,250 mm spacing), automatic lubrication, and drive motor of 3.75 kW with adjustable speed (0–6 m/min) ✅ Powder Recovery System: Cyclone and after-filter recovery system with automatic vibrating sieve and 24 long-fiber filters. Fan flow rate up to 19,263 m3/h, automatic reverse air cleaning ✅ Control System: PLC with touch-screen interface, fully automated monitoring and control of spraying, curing, and recovery. Additional Advantages: – Currently in commercial operation, available for inspection and staff training – Sale is “as is, where it is” – Disassembly and transportation are not included, but can be organized on-site Price: €60,000 SRPSKI: Tsdpfx Abjwvaaiouod Linija za elektrostatsko plastificiranje aluminijumskih profila – skoro nova, potpuno ispravna i spremna za preuzimanje Prodaje se kompletna automatska linija marke NYS Equipments Co., Ltd., vrlo malo korišćena i u odličnom tehničkom stanju, koja se i trenutno nalazi u komercijalnoj proizvodnji. Linija je idealna za obradu aluminijumskih profila maksimalnih dimenzija 7.000 x 300 x 1.500 mm (DxŠxV) i kapacitetom do 15 nosača/h. Osnovne tehničke karakteristike: ✅ Proces: automatsko elektrostatsko nanošenje praha sa 16 automatskih i 4 ručna pištolja (Corona tip) ✅ Peć za polimerizaciju: gasno grejanje (RIELLO) kapaciteta 700.000 kcal/h, PID kontrola temperature sa preciznošću ±2 °C, unutrašnje dimenzije 11,1 x 7,8 x 2,59 m ✅ Sušara: gasno grejanje kapaciteta 200.000 kcal/h, unutrašnje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dupli lanac, razmak između nosača 2.250 mm, pogonski motor 3,75 kW, automatska kontrola brzine (0–6 m/min), sistem automatskog podmazivanja ✅ Reciklažni sistem praha: ciklon + after-filter sa automatskim vibracionim sitom, kapacitet ventilatora do 19.263 m3/h, filtracija 24 filtera (long fiber), automatsko čišćenje reverznim vazdušnim mlazom ✅ Kontrola: PLC sa touch-screen komandnim panelom, kompletan nadzor i kontrola procesa (kretanje transportera, temperatura peći, reciklaža) Pogodnosti: – Linija spremna za preuzimanje „viđeno–kupljeno” (it is, as is, where it is) – Mogućnost probe i obuke osoblja pre preuzimanja – Demontaža i transport nisu uključeni u cenu, mogu biti organizovani na licu mesta Cena: 60.000 €

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: Todex H Tadjpfx Abujd - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane Tedpowrxczsfx Abusd SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Maximum workpiece height: 320 mm Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Total weight: 1,100 kg EQUIPMENT Light curtain Todjzh Nggopfx Abuod

Condition: reconditioned (used), functionality: fully functional, We offer refurbished turbines from a continuous blasting machine – Rösler RRB 22/5-L. Turbine type: Hurricane H42. The stated price is for 1 unit. Turbines are refurbished using original spare parts made of tool steel. Blasting machine, blasting nozzle, blasting and sanding, sandblasting, blasting, shot blasting turbine. Tjdpfx Abeztp Aljujd

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Tjdpfszkt I Tsx Abujd

Condition: used, functionality: fully functional, 2x Sulzer Unicoat Powder Coating Systems Todpfxjz Hc The Abusd Please view all the sale related information on AllSurplus.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Tjdjw Ivp Nspfx Abuod

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Tedpfx Absw Ivqgoued Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Tjdpfx Abjw Ivrkjuod Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Tedpfxsxzuimo Abued Type: V40 Series: firestar Year of manufacture: 2018

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS Tjdpowzmcbjfx Abuod After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Todpfxoxm U Exo Abuod Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Todpjxnbf Ujfx Abuod Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Tsdpfx Aoyg H Dhobujd 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡