Used thermoforming machinery for sale (48)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 Klodpfx Amox Uym Hj Eer CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Ksdpfjq A Um Rjx Am Eelr Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 2004, (LIDS PRODUCTION) Machine consists of: -1xRoll-off block -Thermoformer Gabler Swing -Stacking Kjdpfx Amsyh Hhye Eslr

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. All transport-related procedures and requirements are to be carried out at your own expense and risk. The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale. Klodpfxsyk Dr Do Am Eor

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h Kedpshbu E Hefx Am Eolr COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Kljdpsn D Ew Isfx Am Esr Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Klsdeq Nn Hcspfx Am Eer Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 00020, Type: Transfer device R3 Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm. Ksdpfx Amjupi Aqj Eslr

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 YEAR OF MANUFACTURE: 2002 SERIAL NUMBER: 02 2406 TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa Klodpfx Asyin Ugsm Eor WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Kedpfxettlzfs Am Ejlr Year 2011 Condition Excellent Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Klodpfx Aouzi I Esm Eer Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Kjdpfx Amew Rpzqo Eelr Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Kodpoxp H Nuefx Am Eelr Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Total Weight 6,600 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Kodewkkpqopfx Am Eolr Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Delivery date Immediately Stations Three Max tool dimensions TBC Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Depth of draw 120 mm +/- Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Ksdpfex Ekcaex Am Eelr Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW Kledpjg H I Nxofx Am Esr P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), COTEC Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD Unit For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for producing high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Fields of application: • Optics (e.g., eyeglass lenses, precision optics) • Display and electronics industry • Medical technology • Automotive and supplier industry • Consumer goods and decorative surfaces Technical data & features: Model: COTEC HCS 100 P-UH Process duration: approx. 12 minutes per batch Capacity: up to 110 substrates Ø 70 mm (2 racks) Internal chamber: Ø 600 × 540 mm Heatable chamber up to 65 °C Fully automatic process control (PLC) with 19'' operator panel Vacuum system with integrated evaporator for DURALON materials Uniform coating, even on complex 3D geometries No post-treatment required Weight: approx. 300 kg Condition: used Scope of supply: (See image) Kljdpfx Aow Tbvrom Eer (Subject to change and error in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, total height: 4,000 mm, overall weight: 12,000 kg, temperature: 900 °C, Equipment: safety light barrier, TOOLS FACTORY TF Millenium 875 Plus Thermoforming machine Stairs Metal mould frame – 3 pieces Punch (die) Cooling system modification Black resin used for moulds and metal frame New filters for the machine Dimensions of the thermoforming machine: 2 identical sections, each 350 cm x 550 cm x 355 cm, weight per section is 6 t. We provide machine dismantling, packaging, and loading onto truck. We can also offer installation of the machine at your facility (optionally, upon agreement). Klsdpfx Asyy Rrdsm Ejr

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: Kedpjwf Dvajfx Am Eslr 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Klodpfowf D R Rox Am Ejr Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table Kedpfxjft S Eas Am Eolr > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Drawing depth: 600 mm Ksdowf Ebwjpfx Am Eolr If you would like further details or a quote, please contact us.

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators Klsdpfxsfug Ane Am Eor > Upper stamping system > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding

Condition: reconditioned (used), functionality: fully functional, Max. forming area 960 x 660 mm Min. forming area 269 x 444 mm Max. sheet thickness (manual loading) 12 mm Max. sheet thickness (automatic loading) 10 mm Max. tool height 450 mm Year of manufacture 2000 Technical features of forming station UA 101 L: - Siemens control with swiveling operating panel - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater Kjdpfx Amswf Dtxo Eelr - Upper plunger system - Parallel clamping frame - Automatic window plate adjustment, lower frame - Automatic window plate adjustment, upper frame - Vacuum for sub-table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening with pneumatic interlock for tool change - Film sag control - Film pre-blow control - Vacuum preparation at the upper plunger - Tempering connection - Automatic tool change system, large setup - Vacuum pump Technical features of loader BE 101 L: - Upper and lower preheating - Powered movement of upper and lower heaters via rocker arm - Upper heater: 5 temperature control circuits via pilot radiators - Lower heater: 3 temperature control circuits via pilot radiators - Height-adjustable upper heater - Motorized, parallel lifting film transport - Film transport via pin chain - Film guidance with rollers - Automatic transport width adjustment - Motorized sheet lifter with automatic tool clamping - Mobile sheet loading trolley Options (price on request): - Pyrometer in upper heater for measuring temperature on film - Retrofit for roll material processing

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Kedpswf Ea Tefx Am Eolr Forming area: 1200 x 1460 mm Drawing depth: 700 mm If you would like further details or a quote, please contact us.