Used thread rolling machines for sale (45)

Condition: used, Year of construction: 2003, Thread rolling machine ESCOFIER H20Z 2-roll 2 moving heads (in sync) 2 - 20 Ton rolling pressure workpiece diameter: 75mm max. tool diameter: 140-200 mm Max plunge width 160 mm Shafts dia: 69.95 Swivelling: +/-6°, Laedpjt Hmv Nofx Ah Usk New: 2003 under power in our warehouse, M i M u machine tools

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm Lasdpfx Ahjt Hwzcj Usk thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump Lasdsuhb Uhopfx Ah Usk - 2 boring wheel 80, diameter : 260 [mm]

Condition: like new (used), functionality: fully functional, Thread rolled both ends the same time! Diameter range M6-M16 Max total length 600 mm. Lodpswalx Eefx Ah Usak Max threaded length 60 mm. Adjustment is not difficult at all. We could offer machine with dies according to your wish, be made by our factory too. We are located at Athens, Greece, near to the center. You can view machine under power after appointment.

Condition: good (used), Maximum pressure 25tn • 69 and 85mm axles • Machine in very good condition, completely revised Lajdpsgqumpjfx Ah Uok

Condition: ready for operation (used), Year of construction: 1995, BAD DUBEN Model PRX 32 E - CNC Used - in excellent condition Bad Duben: 2 The Cylindrical Thread Roller Brand: BAD DUBEN Model: PRX 32 E - CNC Type: Threading Machines, Thread Rollers, Cylindrical Die Condition: Used, good condition Serial no.: 17 Year: 1995 Max rolling pressure: 16 T Workpiece diameter: 6 - 24 mm. Thread Length: 200mm. Roller diameter: 195 mm. Max pitch: 3mm. Speed Range of roller splindles: 40-315 Diam: 210 mm. Laodpsv Imqysfx Ah Uek Weight: 4,500 kg. Visible c/o H.B.R. srl - Calolziocorte (LC) - Italy

Condition: used, Thread rolling machine ORT RP30U Laedst H Ty Uspfx Ah Uok 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm Lajdjt Hw N Tjpfx Ah Uok threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Max. part length : 1350 [mm] - Max. teeth length : 1200 [mm] - Max. teeth diameter : 120 [mm] - Power : 18,5 [kW] Laodpfx Ajuhb Unsh Uek - Machine dimensions : 2840 x 1700 x 1420 [mm]

Condition: used, 2 Used Thread Rolling Machines WMW UPW25 Lodpox Dmnyefx Ah Usak ---Only 10.000,00 Euro---

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Ljdpjv Tqdbsfx Ah Ujak Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Lodpfx Ahjxbfwzj Uoak Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Lsdpfxowwmiyj Ah Uoak LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Year of construction: 1974, condition: reconditioned (used), Capacity (mm): M8x60/80 Production (max): 300 ppm Laedpeh Rabkjfx Ah Usk

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg Lodpfevyyyxex Ah Usak

Condition: used, GEWINDEROLLMASCHINEN VEB WMW GWR 80GR Lasdpsig Txmefx Ah Usk WITH A LOT OF TOOLS

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Lodpfxjfnk Ehj Ah Uoak Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Year of construction: 2004, CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new Lsdpfx Ast Ek Sfoh Ueak under power in our warehouse Mimu Machine Tools (Italy)

Condition: good (used), Max Diameter: M6 Max thread length: 42mm Lsdpfx Ahjhtal Re Ueak Max length of rods: 75mm Year: 80's

Year of construction: 1989, condition: excellent (used), Capacity (mm): M8x60/80 Max Production: 300 ppm Lodpfx Ajliqf Njh Ueak Year: 1989