Used tilting spindle moulders for sale (59)

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls Iedpfx Ash Nvyzsh Ueik -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Isdevv H T Rspfx Ah Ueik Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: Iisdpfx Aor Hr D Nsh Uek - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: excellent (used), CATALOG NUMBER 6856 TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 110 mm - Spindle locking - Electrically adjustable up/down + angle, 0.18 kW - Original guide with full adjustment - 5 spindle speeds + forward/reverse: 2900, 4400, 6000, 8000, 10000 rpm - Table dimensions: 1200x900 mm - Cast iron table - With electric brake - Motor approx. 7.5 kW - Extraction nozzle diameter: 150 mm Iisdpfji Apg Hjx Ah Uok - Machine dimensions (L/W/H): 1750x1200x1750 mm - Weight: 990 kg ADVANTAGES – German-made – Tilting spindle – Brake – Used milling machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Isdpfx Ahjiknp Rj Ujik Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, Table dimensions 1.200 x 780 mm Motor output 7,5 kW Iiedpfx Aoxyafqjh Uek Spindle diameter 30 mm

Condition: good (used), Year of construction: 2006, SCM - spindle moulder - FORMULA T60F Used machine Year: 2006 Table length: 1200 mm Table width: 720 mm RPM: 3000 / 4500 / 6000 / 8500 / 10000 Iodpfxsx Elwrs Ah Uoik Manual spindle height adjustment

Condition: as good as new (ex-display), functionality: fully functional, 7.5 kW Motor, 400 V, 50 Hz Heavily ribbed cast iron table with table rings Electronic soft start and braking device Electric height and tilt adjustment with rapid and slow-motion modes, precise to 1/10, height adjustment approx. 145 mm, tilt adjustment +/- 45.5° 4 spindle speeds: 3,000/4,500/6,000/9,000 rpm Spindle fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut Left-/right rotation, machine socket outlet, arc milling guard type TAPOA, Hofmann "Centrex" Paintwork: grey white/signal blue Table size 2000 x 815 mm Extendable support Heavy-duty milling fence type 2620 Total adjustment via handwheel with indicator included Switchable to tool zero position. Digital display for individual jaw adjustment. Includes quick clamping system for the fence jaws Cast iron fence jaws Iiedpfxox Ey S Re Ah Uek Safety rulers and moulding board Interchangeable spindle MK5 Power feed unit, 4 rollers, 8 speeds with stand Control panel on top Tool compartment

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. Iedpfex Dmnaex Ah Ujik The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: used, Year of construction: 2013, 1 swivel spindle moulder, manufacturer Format, model Profil 45/07, serial no. 61.07.092.13, year 2013, sliding table approx. 2 m, fence, with digital readout, Haffner 4-roll feed, internal no. I440050 Isdpexzn Ebjfx Ah Ueik

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp Iisdpfecuwptsx Ah Ujk incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right/left rotation. Control panel on top. Table extensions and pull-out table support. Motor 4.7/5.7 kW. Spindle diameter 30 mm. Weight approx. 1000 kg. With feed unit WEGOMA VS 34, 3 rollers. Iodpfx Ahsxwxrqo Ujik

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds Ijdpexyfrpsfx Ah Uoik 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: used, Table dimensions 2500x 780 mm Motor output 7,5 kW Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min Iijdoxpi D Iepfx Ah Uok

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Iiedpfsxbq Ulex Ah Uok Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: used, Year of construction: 2012, 1 edge sanding machine, manufacturer Felder, model FS 900, serial no. FS01.07.12, year of manufacture 2012, 4-roller feed unit type F 48, internal no. I440047 Iiedpfx Ahexzn Aye Usk

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm Ijdpfxowu D A Es Ah Ueik CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: good (used), Year of construction: 1999, functionality: fully functional, height adjustment type: electric, table height: 860 mm, table length: 2,000 mm, power: 75 kW (101.97 HP), table width: 800 mm, total height: 860 mm, type of input current: AC, total length: 2,000 mm, total width: 1,200 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, opening width: 370 mm, input voltage: 400 V, rotational speed (min.): 10,000 rpm, clamping height: 125 mm, rotational speed (max.): 10,000 rpm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Suva matic Iiedpfxevn Rb As Ah Ujk

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor Iiodpfx Aswt A Iqoh Usk 4 spindle speeds Very good condition

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° Ijdevzghrjpfx Ah Usik spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Iedpfxsu Nz Ndo Ah Usik Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: used, Year of construction: 1993, Milling machine, Manufacturer: GEA Year of manufacture: 1993 Tiltable Motor 7 kW Spindle 30 mm with Wegoma 3-roller feed Stepless 3–24 rpm Ijdpfx Ajwufn Aoh Ujik 6 speeds up to 10,000 rpm

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: Iedpfx Ahed Etkhs Usik - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2003, functionality: fully functional, Work table dimensions 1,200 x 730 mm Spindle tilt -10 + 45 Max. clamping height on spindle 140 mm Max. tool diameter tool diameter 250 mm Max. diameter for tool lowering under table 300 x 130 mm Spindle speed 3300/4400/5600/7500/10000 rpm. Extraction nozzle on fence and rear stand, diam. 120 mm Pneumatic working pressure, min. 6 bar Iijdpovurhdofx Ah Uek Main engine 7.5 HP, 5.5 kW For further information about technical data. Contact us

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Iiedewztr Nopfx Ah Uok Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts