Used tool milling machines - univ.conv. 0-399mm X-axis travel for sale (127)

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Cjdpjx S Edlsfx Apbjrh Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Crodjxyc Tkepfx Apboh Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system Csdpou Tuk Hjfx Apberh - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant Codpfx Astqqn Ropborh

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm Cjdpfxswwwr Ee Apberh z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Codpfsv T Nqyex Apberh Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  -)coolant equipment -)machine lamp Csdpfx Aergvbpspborh Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Crodpjy Ddd Uefx Apboh

Condition: new, Year of construction: 2025, feed length X-axis: 300 mm, feed length Y-axis: 165 mm, feed length Z-axis: 280 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 330 mm, quill stroke: 70 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 40 rpm, overall weight: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. Crodpfx Aex H Nw Sjpbjh This is a true all-rounder for training workshops and small batch production. The Macmon provides a conventional base in combination with a Heidenhain TNC128 CNC path control system, making this model an absolute must-have in certain work environments. And the best part: With a footprint of just one square meter, this machine fits into any workshop! Technical Standard Specifications: • Heidenhain TNC 128 control (integrated into the control panel) • Ribbed cast-iron construction with hardened and ground guideways on the column and slide • 360º swivel vertical head • Extendable quill, stroke 70 mm • Removable vertical head for switching between vertical and horizontal milling operations • Dovetail guides on all axes • Precision ground leadscrews on all axes • Mechanical tool clamping for both vertical and horizontal spindles • Tool holder ISO 40 for tools according to DIN 2080 AT 3 with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical mounting surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN linear measuring systems, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling device, console and end bracket • Chip tray, blue RAL 5019 • Paintwork: blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD with TNC 128 programming instructions • 1 inspection log and basic circuit diagram • 1 hand-operated oil pump • With counter bearing, plain bearing bush ø 16 mm (sliding bearing) for milling arbor length 230 mm • Machine lamp • Chip guard system (required safety device according to EN 13128 for EU countries)

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, Credpovzhidsfx Apboh drill chuck, coolant

Condition: used, Year of construction: 1982, x-travel 300 mm Csdjvvnfujpfx Apberh y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions Crjdpfor En Dyox Apbsh used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 Cjdpecxxrvefx Apbsrh - Seperate power cabin

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm Csdpfx Apocxxp Tebsrh y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 T - slots - width:12 mm spindle speeds::20 - 2000 U/min turning speed range - vertical:60 - 1200 U/min turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) Credpfxocxxlie Apboh - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm Codpfecxxntox Apborh spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: used, Year of construction: 1978, x-travel 300 mm Credpfx Apewl N R Nsbeh y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Csdorn I Rzspfx Apbjrh Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen Cedpfxemhfrrj Apborh The machine corresponds technically to the state of the year of manufacture.

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Cjdpfxeyxy Sws Apborh Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: reconditioned (used), Year of construction: 1987, Universal milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 - refurbished, newly painted, RAL 7035 light grey / RAL 7012 basalt grey Machine No.: 2102-3429 with warranty Geometric accuracy check with test report Accessories: - 3-axis Active digital display HEIDENHAIN TNC 113 with Active function in the X, Y, and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Central lubrication, electric Credpohtrd Iefx Apbjh - Operating manual - used, sold as is -

Condition: reconditioned (used), Universal tool and cutter grinding machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Overhauled and CE certified Geometric inspection with test report Credpfxedvdc Io Apbeh Comes with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety features: - New machine electrical system with control cabinet - Electronically monitored safety guard on the vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start, and stop buttons - New documentation for the machine and control cabinet - CE declaration of conformity

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Codpfxjugv Hvs Apberh Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 Csdpfoy Nnw Nsx Apbjrh control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm Cjdpfod Tfciex Apbjrh z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg