Condition: used, filter area: 60 m², suction capacity: 5,000 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. PLYMOVENT MDB Multi Dust Bank Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Duob Eowbtczecrzhet 5.5 kW fan complete with noise silencer Efficiency 5000 m3/h Filtration area 60 m2 Filter inserts 4 pcs. Inlet diameter 315 mm The device is in very good technical condition.

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: S26802, type of input current: three-phase, input voltage: 400 V, frequency: 50 Hz, input current: 8 A, Equipment: type plate available, Grinder Centrifuge, not put into service, practically new, attached to the transport pallet. Djb Esu Agicjcrzhjut

Condition: reconditioned (used), Year of construction: 2002, operating hours: 28,055 h, Functionality: fully functional, laser power: 2,500 W, Equipment: cooling unit, Round tube min 12 mm max 140 mm - Square/rectangle tube min 120x120 mm - Bar weight max 15 kg/m Dujb Ecer Iz Nbsrzhot

Condition: ready for operation (used), Functionality: fully functional, 2 Merkle RedMIG 3000 K welding machines for sale. The machines are maintained and in working order. Only sold together, not separately. The combined price of the two machines is 800 Eur. Dueb Ecet Tducerzhot Description: Welding current adjustment in 14 steps. Operating modes: 2-stroke / 4-stroke / section and spot welding. Continuously adjustable welding and pause time. Accurate wire feed unit. Standard EUR connector Wire burnback is factory-set The transformer and choke unit are equipped with copper windings and thermal protection A stable galvanized holder ensures the placement of the bottles. Easy to move (rotating stool, large axle rubber wheels)

Condition: new, neu ca. 4 Wochen ab Auftragse 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling Duebsvzh Nke Ecrzhot - Substructure with stiffeners

Condition: new, Year of construction: 2025, Here are the main features, functions and benefits of the welding positioner: Characteristics: 1. Versatility: The PS-360 positioner is a versatile auxiliary tool that can be used in various types of assembly and welding works. 2. Automated processes: The machine can be used in partially automated production processes, which contributes to increased work efficiency. 3. Welding in the optimal position: The device allows welding of cylindrical elements in the optimal position, which translates into safe, fast and accurate welding. 4. Solid construction: The solid construction of the machine ensures its durability and strength, which increases the quality of the work performed. 5. Tilt adjustment: The rotator disc can be tilted from 0 to 90 degrees, giving you the flexibility to adapt it to a specific job. 6. Regulation of rotational speed: The possibility of smooth regulation of the rotational speed of the turntable allows it to be adapted to a specific application. 7. Pedal control: The device is equipped with a pedal that allows the welder to control the positioner's operation. Advantages: 1. Increased work efficiency: Thanks to the ability to rotate cylindrical elements in the optimal position, welding works become more effective. 2. Reduce production costs: Automated or facilitated part rotation can reduce production time and costs. 3. Repeatability of work: The device helps maintain the repeatability of the joints made, which is important in production. 4. Flexibility: The positioner is flexible in use and can be adapted to various tasks. 5. Improved working conditions: Allows the welder to work more comfortably and ergonomically, which translates into improved working conditions. Set contains: 1. PS-360 positioner device. 2. Control pedal. 3. Power cable. 4. User manual. 5. Mast with welding fixture. The CORMAK PS-360 positioner is a useful tool in industries that require rotation and positioning of elements in assembly and welding processes. This helps increase efficiency, reduce costs and improve the quality of work performed. Technical parameters: Rated load 100kg Worktable size φ360 mm Tilt angle 0°～＋90° Rotation speed 0.2 ~ 5 rpm Rotational power 120W Manual tilt Voltage 220V-1PH-50HZ Weapon support Dimensions 530x550x500 mm Dusb Eerigmgjcrzhet Weight 49 kg *three-jaw chuck is not included in the set

Condition: good (used), Year of construction: 2021, operating hours: 5,400 h, Functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, - Power source Hypertherm Powermax 65 - Piercing up to max. 16 mm Deb Ecrzetlq Rieheut - Needle marker - TEKA filter system Machine on: 5400 h Cutting times: 590 h Table size: 6000x2000 mm Permissible sheet thickness: up to 100 mm material thickness High-quality linear guides

Condition: new, Year of construction: 2024, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Dueb Ecsi Apfzorzhet Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: good (used), stick electrodes 3.2 x Type: Phoenix SH Yellow B -Price: per package Deb Ecrzsv Ab E Uoheut -Quantity: 2 packages available -Weight per package: 4.4 kg

Condition: good (used), Functionality: fully functional, load capacity: 18,000 kg, total height: 3,650 mm, rotary table diameter: 2,130 mm, overall weight: 13,000 kg, table load: 18,000 kg, pivoting range: 135 °, disc diameter: 2,130 mm, For sale: 1 used welding positioner Dob Ecrzerpmzmshjut Manufacturer: Worthington type: 400P Table diameter: 2.130mm max. weight on the table: 18.000Kg Rotation of the table: 360degrees Table inclination 135degrees Variable table speed: 0.2 - 3 rpm Mass approx.: 13.000Kg Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: new, neu ca. 4 Wochen ab Auftragse 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg Dujb Ecjvn Altjrzhjt 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Year of construction: 1986, Condition: ready for operation (used), machine/vehicle number: 1602097, A used flame cutting machine (3000 x 1800 Corta) from the manufacturer Messer Griesheim. Dobed Eg Tle Ecrzhsut Type: CORTA KS 1500/2000 Machine number: 1602097 Year of construction: 1986 Machine connection: 220 V, 50/60 Hz, 1.0 kVA

Condition: used, Year of construction: 2004, filter area: 132 m², suction capacity: 7,300 m³/h, negative pressure: 3,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: ESTA Model: DUSTEX XF-132 Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Dujb Ecswa R U Eorzhst Efficiency - 7300 m3/h Negative pressure - 3800 Pa Filtration area 132 m2 Cartridge filter inserts - 6 pcs. 7.5 kW engine. inlet diameter - 350mm Dimensions of the device: width - 1.90 m depth - 1.40 m height -3.60m no. warehouse: 0845

Condition: used, Spot welding machine, projection welding machine ARO type MA 50 SC Mach. No. 0723122BA0001 Year of manufacture 2007 Output at 50% duty cycle 50 kVA Output at 100% duty cycle 35 kVA Maximum welding output 156 kVA Thrust 350 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar) continuously adjustable Operating air pressure 3.5 to 6 bar Mains connection 400 volts, 50 Hz Connection power 117 kVA / 100 amps / cable cross-section 3x 35 mm² - Welding control ARO Micro 2X16 III version 10T16P (6 times - 16 programs) - Continuous welding current adjustment via Thyristor module - parallel electrode guide - single stroke welding cylinder - single stroke and series spot operating mode - electrode force infinitely adjustable via air pressure - water cooled by external water cooling (water cooling device not included) - electric foot switch - control cabinet with control permanently attached to the machine - PC interface RS 485 - welding spot counter - operating instructions and electrical plan available space required L x W x H 650 x 950 x 1770 mm weight 330 kg Dob Ecsv Hruhjrzheut good condition

Condition: good (used), Fronius TPS 400i ✅ Scope of delivery: ➤Fronius TPS 400i PMC power source AND LSC software! ➤Fronius WF 25i wire feeder ➤Fronius CU 1100i water cooling system ➤Fronius hose package ➤Ground cable ➤Pressure regulator Scope of delivery = Photo This powerful and versatile 320-ampere welder impresses with its precise welding process and consistent quality of all results. Available via WhatsApp / Viber ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! Dsb Ecrswbwdpszhout ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, working range: 3,100 mm, working width: 1,500 mm, table length: 3,100 mm, For sale: Dusb Ecstnc Sferzhet 1 used plasma cutting machine Manufacturer: Air Liquide Type: Plasmatome 20B YEAR OF MANUFACTURE: 2014 Table size: 3.1000 x 1.500mm Burns up to 20mm mild steel Incl. documentation, very well maintained condition. Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: new, neu ca. 4 Wochen ab Auftragse 1940 € 2000 x 1000 mm 850 mm 450 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) Duob Ecrzjvn Algohet - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Deb Ecrzsv Sql Nohjut Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Additional control unit 1036

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New MIG OKIO AB6-C1400 welding robot Deb Ecreqnt Hajzhjut -Country of origin: China -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum load capacity: 6 kg -Switch cabinet -Tech Pandant -Wire feed unit -Welding source: MIG Ehave-CM350

Condition: new, neu Duobovn Alaj Ecrzhjt ca. 6-8 Wochen ab Auftrag 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, Year of construction: 2023, OKIO AB-1410G laser fiber welding robot Robot reach: 1400 mm Dujb Ejpq Nw Tjcrzhst Load capacity: 10KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: MAX PHOTONICS 3000 (Supply voltage: 220V, 1 phase, 50 Hz)

Condition: new, neu ca. 6-8 Wochen ab Auftrag 1190 € 1000 x 1000 mm 850 mm Dusb Ecrovn Akpszhet 450 kg 25 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, Never used Year of production: 2017/2018 Quantity: 5 pieces Never used Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Dueb Estu Udiocrzhjt Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: new, neu ca. 6-8 Wochen ab Auftrag 6400 € 132.48 € 3000 x 1500 mm Deb Ecrzevx Dv Uehjut 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 4 Wochen ab Auftragse 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Deb Ecrjvzh H Aszhout