Used lowboy semi-trailers / low loaders for sale (196)

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS Giodpjx Efznsfx Abmet - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches Giodpfxorgzv Nj Abmot * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm Gijdpfoxbmplsx Abmot * 2 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system Gsdpfov Sw E Aex Abmsit * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, maximum load weight: 91,640 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full specification available upon request. Gooseneck * Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook couplings front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical bolt coupling for front connection of a low-bed, rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection * Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication system for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication system for one 3-axle bogie * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart * Steel mattresses with rubber flooring approx. 12 mm thick * One 7-pin socket left and right, front and rear of the rear bogie for warning signs * BEKA-MAX central lubrication system for one 5-axle bogie Gedpfx Abouvbdtsmeit * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve Giedetx Nwnspfx Abmet * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: Gjdpow Tpq Djfx Abmoit - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted Gsdpfxswx Dbie Abmsit * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF Gsdpjxf Silefx Abmsit - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Elongated slots for insertable and repositionable bridging elements at the front of the platform * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side Giedpfxoxtc Uho Abmot * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) Gsdpfx Aov Etx Eobmeit * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red Giodpew Tprzjfx Abmot * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion Gjdew Tpqwepfx Abmjit - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display Gjdpfx Absu Sd U Usmeit * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Gedpfx Aolthgusbmsit Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: new, empty load weight: 8,785 kg, overall weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,311 mm, loading space width: 2,500 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 14,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone Cool Liner Multitemp deep-freeze semi-trailer – New vehicle | Double-deck without beams – beams available on request | Floral width, lift axle | Krone axles with disc brakes | Toolbox | Spare wheel holder | ThermoKing SLXi refrigeration unit | Tyres: 385/65 R22.5 | Diesel hours: 3h | Semi-trailer from current production! Multiple units available | Subject to errors, input mistakes and prior sale. Gjdpfxoyi S R Es Abmoit

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 01/2024, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! Giodpfx Aoyf E E Uobmst With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles Gedpfsxu Nnwjx Abmoit * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg Gsdpfx Abewxm Ilomeit * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low-Loader Extendable with Wheel Wells (NEW) ---- Equipment & Highlights Technology & Construction - Extendable low-loader trailer with wheel wells - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height only 875 mm for a low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles - 4 BPW axles: front 2 rigid, rear 2 self-steering axles - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring system per R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel wells and bridging plates included - Excavator arm recess at the rear Load Securing - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / wheel well area - 5×2 stake pockets, detachable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft Equipment & Comfort - 1× toolbox (700×400×360 mm) - Stake box - Beacon light - LED side marker lights, LED work lights Gedpfx Aox Ix Rqebmeit - Wheel chocks - Width indicator panels with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Colour: Red ---- Special Features - New & immediately available - High payload, extremely versatile - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust design, high-quality BPW components We are happy to provide further information on request.

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer SLAR3 Extendable Lowbed with Wheel Wells Technical Specifications: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel wells, suitable for the transport of vehicles and heavy machinery. Dimensions * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm Gisdpfx Absx Epaqomjt * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tons per axle) * King pin capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 fixed at the front, 1 trailing axle at the rear) * Lift axle: Manually selectable load-dependent lift (1st axle) * Axle type: BPW axles with drum brakes Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre ratings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Improves fuel efficiency and extends tyre lifespan * Number of rims: 12 (steel rims with offset ET120) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line pneumatic WABCO brake system, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, ASPÖCK multi-chamber lights, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² interconnect cables (3 m length) Ramps * Ramp type: Foldable hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp floor: Made of hardwood * Safeguards: Ramp protection chain included Load Securing * Lash rings: - 2 x 2 each with 5,000 daN load capacity - 1 x 2 each with 10,000 daN load capacity on the gooseneck - 4 x 2 lash rings with 6,000 daN capacity in the deck area * Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel floor with tear drop pattern * Wheel well bridging: Removable hardwood bridges with steel supports to cover the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colors * Chassis: Traffic red (RAL 3020) / also available in black * Partial metal coating of load surfaces Condition: New and immediately available. * Perfectly suited for heavy-duty transport and use in construction or machinery relocation.

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Gjdpfxex Efzuo Abmoit Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons Godoxy Ddkopfx Abmjit * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 19,080 kg, overall weight: 28,480 kg, axle configuration: 2 axles, first registration: 08/2025, next inspection (TÜV): 08/2026, CAUTION: To be operated only with tipping hydraulics! BPW 10t axles, 2 steering axles, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, CAUTION: To be operated only with tipping hydraulics! Fifth wheel height 1.25m, hydraulic 1400x700 + manual 700, Giodpfxjykgkce Abmet

Condition: new, maximum load weight: 38,953 kg, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, MAX100-N-3B-9.30-U Technical data Speed: 80 km/h Total weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Empty weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading area length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height with max. load: 860 mm Total width: 2,540 mm Suspension travel: -55/ +145 mm Technical description Gooseneck: Gooseneck with bevelled corners 45° at the front and with a rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring 30 mm thick. Loading area: Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm, with a rear bevel of approx. 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings that can be folded inwards on the central support at the front (LC 10,000 daN). Cutouts in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N). Hardwood flooring approx. 48 mm thick, checkered sheet flooring over the axles. Ramps: Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood flooring. Ramp with hydraulically foldable and unfoldable ramp sections, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair: 40,000 kg Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Tires: 235/75 R 17.5 tires as selected by the manufacturer. Axle: SAF axles, air-sprung, with drum brake, with lifting/lowering function. The last axle is self-steered with an electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Gijdpfxjg Sk Trj Abmot Accessories included 2" kingpin A galvanized steel bulkhead approx. 400 mm high. Yellow-red air couplings on the galvanized connection strip at the front. 4 pieces of chocks with holder on the bulkhead. (± 5kg) Cable for supplying the electro-hydraulic unit and/or the electric cable winch (35mm², 3.5 m long, max. 250A) between the trailer and tractor unit with plug connection (ANDERSON-ANDERSON) Galvanized folding supports under the slope of the loading area. A bracket for a rotating beacon at the rear of the trailer. Control valves for the ramps attached to the right-hand side of the trailer. (± 4kg) Yellow reflector tape in accordance with EU regulations on the side and rear of the Trailer.