Debarker

Cambio 75

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. Giedpfx Anow Emhfsleu In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 135 h, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fuel type: diesel, first registration: 12/2022, color: red, overall weight: 3,350 kg, total height: 2,450 mm, total length: 3,500 mm, total width: 1,980 mm, machine/vehicle number: VBLA4T40020750413, Equipment: air conditioning, cabin, front power take-off, hydraulics, power shift gear, Compact, maneuverable – yet powerful and extensively equipped: Lindner Lintrac 75 LS – Financing options available. Gedpfxozb N Hnj Anloiu Engine: PERKINS Syncro 55 kW, 75 hp, 350 Nm 4 cylinders, 3600 cm³ Turbo-diesel engine Emission stage 5 Transmission: 15/16-speed ZF Steyr Power2 power shift transmission, 40 km/h Power take-off: load-sensing rear power take-off, 430/540/750/1000 rpm; front hydraulics with power take-off Top link with quick coupler, additional lift cylinder Hydraulics: Bosch Rexroth high-performance pump, separate oil circuit Design fenders instead of rubber fenders, DAB+ radio, USB, Bluetooth Subject to prior sale – all information is non-binding. The accuracy and completeness of the information provided here are not guaranteed. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement will be exclusively the motor vehicle in its actual condition.

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Gedpfxov Irvus Anljiu

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Gjdpfx Aexr Ityonlsiu Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg Gedpfeb Auu Rox Anleiu

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Gsdjwlaxkepfx Anljiu Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Giedpjwxdimsfx Anlou Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Gsdpofi Tg Hjfx Anloiu Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, Year of construction: 1995, Used van Aarsen C750 Pelletmill / Pelletpress Incl. Feederscrew, mixer 160kW IE3 WEG Main motor Automatic rolleradjustment Godpfxov Skrie Anljiu Incl. rollers and frame Mainshaft refurbished 2-3 years ago

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 Giedpfxjuqynmo Anlou vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW