Machining center

Deckel Maho DMU 70 V

Condition: ready for operation (used), Technical Data – DECKEL MAHO CNC Machining Center General Information Manufacturer: DECKEL MAHO Machine type: CNC Vertical Machining Center Axes: X / Y / Z (optionally with B and C axes depending on configuration) Control: Heidenhain TNC 426/430PB Working Range: Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Feed Drive Drives: AC servo motors Feed rate X/Y/Z: infinitely programmable up to 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Setup mode: 20 – 2,000 mm/min Input increment: 0.01 mm Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance: with direct measuring system: 0.010 mm Main Spindle – Version 1 (Standard) Max. speed: 12,000 rpm Drive: AC servo motor / motor spindle Motor output: 10.0 kW at 100% duty cycle 15.0 kW at 40% duty cycle Speed range: stepless: 20 – 12,000 rpm Setup mode: 20 – 800 rpm Torque: available at the spindle, efficiency considered (see power diagram) Main Spindle – Version 2 (Option) Max. speed: 30,000 rpm Motor output: 15.0 kW at 100% duty cycle 20.0 kW at 40% duty cycle Speed range: stepless: 20 – 30,000 rpm Setup mode: 20 – 800 rpm Power diagram Power and torque charts available for: 12,000 rpm spindle 30,000 rpm spindle Designed for continuous operation (S1) and short-time operation (S6 – 40%) Working Spindle – Tool Interface SK version Tool holder: SK40 to DIN 2079 Steep taper shank: DIN 69871 A Tool clamping: hydraulic / mechanical Pull stud: DIN 69872 Form A or ISO/DIS 7388/2 Type B HSK version Tool holder: HSK-E50 to DIN 69893 Tool clamping: hydraulic / mechanical Tool Changer – SK Magazine positions: 24 (optionally 60) Max. tool length from spindle nose: 315 mm Max. tool weight (automatic change): 6 kg Max. total magazine weight: 80 kg (optionally 180 kg) Tool Changer – HSK Magazine positions: 24 (optionally 60) Fedsxzvn Dopfx Abujpc Max. tool diameter: 40 mm Max. tool length from spindle nose: 150 mm Required compressed air: 5.5 – 8.0 bar Work Table Clamping surface (standard): 1,000 × 600 mm Permissible table load: 800 kg NC rotary table (optional): Clamping surface: Ø 700 × 500 mm Load: 350 kg Weight & Transport Machine weight (standard): approx. 5,500 kg Max. installed weight (incl. workpiece, coolant, etc.): approx. 8,100 kg Transport weight: approx. 5,500 kg Transport dimensions (L × W × H): 2.75 × 2.02 × 2.73 m Media / Connection Values Compressed air: Minimum pressure: 5.5 bar Max.: 8.0 bar Room temperature: Operation: +15 to +35 °C Optimal: +20 to +25 °C Relative humidity: 20 – 75 % Noise level: < 80 dB(A)

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021) Fpjdpfxowkd Efs Abusc

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Number of machining axes: 5 Simultaneous CNC axes: 3 Clamping area table: 700 mm Workpiece weight: 350 kg Tool holder: HSK A63 Drive power S1 100%: 15 kW Max spindle speed: 18,000 rpm Spindle type: vertical Max tool diameter: 40 mm Magazine type: chain magazine Number of tool positions: 32 Fodpowqgrhsfx Abujpc MACHINE DETAILS Overall height: 2,760 mm Overall weight: 6,000 kg Required length: 2,710 mm Required width: 2,750 mm Connected load: 32 kVA Spindle hours: 27,000 h Operating hours: 83,450 h EQUIPMENT - Coolant system - Fully enclosed working area - CE compliant

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fpodpfeur Hfzox Abuoc Fanuc 310is controller

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Fpsdpfxsfqmx To Abuoc Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: good (used), Robot Manfacturer: Staeubli Fedpfx Abobrhtdjuepc Type: RX170

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Fjdpfxsg N Nl De Abuspc Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Year of construction: 2019, Suitable for the additive manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chromium alloys, titanium, aluminum, precious metal alloys, and Inconel. Accessories: Total enclosure, rePLUG "Standard" powder unit for powder storage and powder feed, extraction of metal powders from the process chamber, and automatic sieving. CELOS for LASERTEC SLM Fire extinguishing system al-deco-STD - Extinguishing unit: 5-liter argon cylinder CELOS App II OPTOMET (Basic) software package for automatic prediction and optimization of process parameters for selected materials: Max. travel X-axis: 325 mm Fjdpfx Aewhiycjbuspc Max. travel Y-axis: 325 mm Max. travel Z-axis: 400 mm Installation space size: 300 x 300 x 300 mm³ Layer thickness: 20 - 100 µm laser type: Ytterbium laser Laser power: max.: 400 W Focus diameter min: 35 µm tank volume: 50 dm³ Connected load approx.: 400 V / 50 Hz Weight approx: 1200 kg colour: Light grey, dark grey, red

Condition: good (used), Waelz piston blower Fpjdpfeb Rnfisx Abuoc Manufacturer: Leybold Type: RUVAC WAU 1001 Cat.-No.: 11741 suction capacity: approx. 1000m³/h Status: Refurbished Warranty: 12 months Delivery time: ex stock

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Fpedsw Ht Ibopfx Abuoc Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4