CNC turning and milling center

EMCO EMCO HYPER-Turn 665 Plus

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Iedpfxjqn E U To Addstb

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Itedpfoxcp Sljx Addeb Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information. Itsdpfx Adew Hxi Dodeb

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Itsdpex Hy R Nofx Addeb Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat Isdpfx Adswh U D Hjdstb

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Itjdpfxex Ih Dgj Addjb

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Iedpfow Tg Adex Addjtb Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface Itsdpfxox E Dncs Addeb - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Ijdpfx Aewmdv Asddjtb

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm Iodpfxsvx U A Sj Addstb forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear