EMCO Emcomat E-200

EMCO Emcomat E-200

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Duodjvvtpxepfx Ag Tsp Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm Dujdpfjwffymox Ag Tep

Condition: good (used), Analog with electrical scanner. - Including several options. Length surface: approx. 990 mm Max height optics glass table (removable) approx. 200 mm (Only the device without the table) dimensions: L / B / H 110 x 115 x 80cm Weight: approx. 400 kg Dsdpfx Agjdy Eyns Teup

Condition: used, Milling Machine Manufacturer: DECKEL Type: FP2 Technical Specifications Manufacturer: DECKEL Model: FP 2 Table Size: 700 x 330 mm X-Axis: 490 mm Y-Axis: 390 mm Z-Axis: 200 mm Spindle Mount: ISA 40 18 Spindle Speeds: 40 – 2000 rpm 18 Feed Rates: 8 – 400 mm/min Motor Power: 2.2 kW External Dimensions: Approx. W1100 x D1400 x H1600 mm Weight: Approx. 1100 kg Equipment • 3-Axis Digital Readout ACU-RITE • Various Collets • Accessory Package as shown in photos Dsdpfxsv Uzzto Ag Toup All information is subject to change. A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment Djdpjx D Hwnsfx Ag Teup • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) Djdpfoxzq Ncex Ag Tjup C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2012, turning diameter over cross slide: 250 mm, turning length: 405 mm, turning diameter: 85 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 300 mm, total height: 1,800 mm, total length: 1,700 mm, total width: 1,270 mm, turning diameter over bed slide: 250 mm, overall weight: 1,400 kg, EMCO Turn E25 Year of manufacture: 2012 Bar feeder Top Load 4-25 Year of manufacture: 2014 Duodpfxjyi Hk Tj Ag Tep Without AWZ Loaded free on truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Control: 840 D With chip conveyor Djdpex Tbcyefx Ag Tjup

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 430 mm, turning diameter: 600 mm, spindle bore: 65 mm, rotational speed (max.): 5,000 rpm, feed length X-axis: 270 mm, feed length Y-axis: 100 mm, feed length Z-axis: 750 mm, High-pressure pump for both tool changers. Chip flushing for main and counter spindle. The tool changer for the counter spindle is as new, replaced about 2 years ago. Duodpfx Asx A Dnhsg Tsp

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Djdpfxsxxakws Ag Toup