Vertical machining center

HAAS VF-4SS

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Spindle taper: BT 40 Max spindle speed: 12,000 rpm Table width: 457 mm Table length: 1,321 mm Max table load: 800 kg. Kdodpfx Aoylw Uzefajh Machine dimensions: 3,300 x 2,330 x 2,570 mm Machine weight: 6,200 kg.

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Kdjdpfx Aeph Uk Nsfajh Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2016, x-travel 1270 mm Kdsdpfx Afeyfw Dcjajh y-travel 508 mm z-travel 635 mm control Haas

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: na, total height: 2,770 mm, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VF4SS vertical machining center was manufactured in 2019. It features a spindle with a maximum speed of 12,000 rpm and a power of 22.4 kW. The machine offers a travel range of X=1270 mm, Y=508 mm, Z=635 mm, and a rapid feedrate of 35.6 m/min on all axes. The table can support up to 794 kg. Consider the opportunity to buy this HAAS VF4SS vertical machining center. Contact us for more information. Additional equipment Kdedsyalkyjpfx Afaeh • Technical manuals and documentation • Chip conveyor • Optional tools included • Loading at our facility available Machine Benefits Technical Machine Benefits • Max torque: 122 nm @ 2000 rpm • Liquid cooled – air/oil lubrication • Size: 1321 x 495 mm • Type: smtc – 30+1 tool positions • Tool change time: 1. 8 s • Rapid: 35. 6 m/min on all axes • Max thrust z-axis: 17459 n • Voltage: 220/440 v – 3 • Phase max current draw: 70 a (at 220 v) Extra Information Machine still under power Dimensions Machine Depth 3870 mm

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, rapid traverse Z-axis: 45,000 m/min, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h Kdodsxcp R Ijpfx Afaeh - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm Kedpjx D Irmjfx Afaodh This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, Kodpfx Afsxpw Rvsasdh coolant, Haas TR210 5 axis trunnion table

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Ksdpox I A Hvefx Afasdh Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Kdedjxtbtijpfx Afajh Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Kodpfxjxb Uhij Afajdh Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders

Condition: used, Year of construction: 2007, machine/vehicle number: 1056795, functionality: fully functional, operating hours: 13,432 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 24, controller manufacturer: Haas, overall weight: 6,000 kg, controller model: Haas, coolant supply: 20 bar, feed rate X-axis: 21 m/min, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Hello,\n\nDue to business closure, the entire company is being sold.\n\nMachines are in good condition, and tools can be negotiated. Kedpfxewccpae Afaedh