Travelling column machining center

Hedelius CB 80 – 2300

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Kledpfx Aboxwytcovep Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min Ksdpsulnbkofx Abvslp total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: good (used), Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 Kledpewbnvcofx Abvop 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Kledpfx Aswfddwjbvep Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2014, DOOSAN - MYNX 7500 - 2014 - system DOOSAN FANUC i series - in tool production only (not in mass production) - spindle running hours 27600 - spindle through cooling Kledpfx Aoyrrimsbvjp - spindle changes (including reserve spindle) - X/Y/Z=1630/762/650 mm - spindle taper BT 40 Big Plus - spindle 12000 RPM - spindle motor 18.5/15 KW (117 Nm) - ATC 30 - table 1630x760 mm - table load 1500 kg - weight 14000 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Klodpox Hzn Aofx Abvop X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Tool magazine: 30 MACHINE DETAILS Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling - without machine vices.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Klodpfxex Ap S Ee Abvjp Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.