Hwacheon Sirius III

Hwacheon Sirius III

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm Pgodpfohktd Nex Am Top 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Podpfx Ameim R A Ie Tjgp After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° Pgjdpjydmuuofx Am Tep B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis Psdpfx Aox I A Awsm Tjgp With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Psdpfjrpk Rmjx Am Tegp Cutting tools not come.

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Pgedpfxjy Ipp Rj Am Top Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Pgedpfx Aex N Atfom Tep

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Workpiece Clamping & Table: • Pallets according to DIN 55201, maximum load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential moment (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage slots (4 drums), max. tool diameter 250 mm, max. length 450 mm, max. weight 35 kg Travel & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Main Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optional 10,000 rpm, 2-stage gearbox) • Tool interface: SK50 (DIN 69871), optional BT50 or HSK-A100 • Through-spindle coolant, max. 70 bar Pjdpfoyzr Ayex Am Togp Coolant System: • Coolant unit with gravity fleece filter • Supply pressure: 10–70 bar, tank volume 3,400 l • Temperature stabilization and compensation for high precision • Optional: Sag and spindle expansion compensation, spindle warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power consumption as per installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm o Umax = 0.004 mm General Data: • Net weight (complete): approx. 26,500 kg • Color scheme: Light grey RAL 7035 / Mouse grey RAL 7005 / Ruby red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German language

Condition: used, Year of construction: 2020, Two machines from year of manufacture 2020 (G5 i) and one machine from 2022 (G5) available. Includes hydraulic unit, oil cooler, and air dryer Initial commissioning of the 2020 machines in March/May 2022, the 2022 machine in March 2023. The machining center can be used for grinding, milling, and drilling of metallic workpieces. A standard integrated dressing unit is included. This machining center is used for hard grinding and finish boring of holes in discs and flanges of precision planetary gear units. Machine Description: Makino Model G5 i Grinder Universal Machining Center With creep feed grinding function Makino Professional 5 Control System Machine Specifications (according to manufacturer): Travel: Column X-axis: 520 mm Spindle Y-axis: 560 mm Table Z-axis: 600 mm Spindle center to top of pallet: 80 – 640 mm Spindle nose to center of pallet: 70 – 670 mm Feed rates: Smallest increment: 0.001 mm Jog operation: 1 - 8,000 mm/min Machining feed: 1 - 48,000 mm/min Rapid traverse: 48 m/min Spindle: Spindle taper: ISO 40 Spindle motor (high torque): 18.5 / 22 kW AC Speed (2 ranges): 50 – 12,000 rpm Automatic tool changer Machine weight: 8,450 kg Controlled Axes: 5-axis simultaneous Special equipment for VIPER grinding: Dressing unit Rotary dressing unit (quick-change) – electric, incl. holder (52 mm) Electrical interface for dresser Workpiece clamping: Erowa ER-029392 Power Chuck Clamping/release control including pressure display Coolant preparation and supply: Water-based coolant filtration system Transfer tank High-pressure pump Self-tilting chip bin Coolant supply bridge Extraction unit including ductwork Makino interface for coolant system Makino interface for extraction system Coolant monitoring (pressure, flow, temperature) Programmable coolant nozzle (PCN) – through spindle, nozzle, base, and shower PCN nozzle assembly Other: Automatic workpiece measuring device (RMP600) Point Master unit (manual measuring probe) Bench Master Air dryer Special I/O interface Machine anchoring set FANUC warranty (2 years) C&F costs UK/Euro transformer High-speed rotary work spindle (100 rpm) Time-delayed splash guard Oil lubrication system for ballscrews and linear guides Programmable coolant nozzle for grinding wheels (PCN) Reinforced splash guard door Automatic front door (AWC) with light curtain Signal lights (3-color) Halogen work lamp (1 pc) Safety interlock package Optional equipment: Easy-Grind Max NC incl. HMI and Machine Manager Scale system X, Y, Z axes (0.05 μm) Pgsdpsywgh Nsfx Am Tep Switching the display language from English to German Freewheel function of rotary axes during operation Project management by NCMT and Melior Motion Easy-Grind Max+ (single station solution, custom configured)

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm Pgjdpswvblasfx Am Top total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *