Used Arburg 221 55 250 for sale (318)

Condition: excellent (used), Year of construction: 2009, ARBURG 370 S — 600-290 Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Hfedszrv N Nopfx Aqiok Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2014, Equipment: documentation/manual, Arburg 470C 1500 400 (2014) Golden edition Clamping force: 150 t Screw diameter: 45 mm (wear resistant) Hfsdpox Elqrofx Aqijk Distance between tie bars V: 470 mm Distance between tie bars H: 470 mm Type: Horizontal Drive: Hydraulic Air blow 2 units Euromap 67 for robot 2 pumps machine Injection pressure incrased 10% (2500bar) HOURS: 54914

Condition: excellent (used), Year of construction: 2006, Arburg 370 S 600-290 (2006) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Hjdpfx Ajzrv Ireqijfk Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar Hjdpfxswugczs Aqijfk 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Year of manufacture: 2010 Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg Hedpozpzh Ssfx Aqijfk

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Hfjdpfezt Ikbjx Aqijk Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t Hsdsvkqfaopfx Aqisfk dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Hedpoznx Hisfx Aqisfk

Condition: excellent (used), Arburg Type: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, larger freeformer 300-3X processes three components in ARBURG's freeforming process (AKF) and enables – for the first time worldwide – the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation "300" refers to the available component carrier area in square centimeters. Compared to the freeformer 200-3X, the build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters. "3X" always refers to the three axes of the component carrier that can move in the x, y, and z directions. For additive manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Hfedozd Tiwspfx Aqisk Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 400 kN, This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details. Hfsdpezh Ey Ajfx Aqijk - Model: ALLROUNDER 270 C 400 - 100- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor Rated Current: 59 A- Heating Rated Current: 31 A- Total Rated Current: 90 A- Total Connected Load: 54 kW- Control System: Selogica Control Panel- Additional Equipment: Integrated part discharge conveyor belt- Space Requirement / Footprint: 3.2 qm- Total Power Requirement: 15 kW- Lubricating Oil Type: Hyspin SP32 (Hazard class A2)- Oil Capacity: 160 l- Standards Compliance: CE Marked- Equipment: Integrated conveyor belt, control panel terminal- Optional: A cooling system and a second machine are available for an additional charge.- Until now, both machines have been running on the same cooling system.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Hfedpfx Aew Hpwrjqijk The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Hfedpfxerthkuo Aqiek Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: used, Year of construction: 2008, operating hours: 20,113 h, power: 42 kW (57.10 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 79 A, We are offering this used Arburg 470 C 1500-400 injection molding machine, manufactured in 2008. Machine No.: 208586 Year of manufacture: 05/2008 Operating voltage: 400 V Operating voltage frequency: 50 Hz Control voltage (AC): 230 V Control voltage frequency (AC): 50 Hz Control voltage (DC): 24 V Motor rated current: 59 A Heater rated current: 20 A Hedpfxjzn H Axs Aqisfk Total current: 79 A Total connected power: 42 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, Arburg 1200T 1000-290 / Vertical machine with a rotary table Year of manufacture: 05.2012 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical machine with a rotary table Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 2 Control with hot runner system x 18 Injection unit hardened - bimetal Servo motor on the injection unit – fast suction and fast injection Proportional valve on the injection unit – precise injection Self-closing nozzle Primus sensor - tool pressure control Rotary table diameter: 1200 mm Dimensions: Weight: 7200 kg Length/Width/Height: 4.36x1.71x3.66 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Hodpfjzpal Ajx Aqijfk Price: On request

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: Hfsdpfxoxf T I Nj Aqiek * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo possibly available at an extra charge. Hfodpfx Aeyl Syrsqijk

Condition: used, Dear Sir or Madam, We offer for sale: Assembly line for inserting a gasket into a jerrycan cap incl. 2 feeder belts (for jerrycan caps and gaskets) Assembly unit Hfodozi A Uyepfx Aqisk as well as carton feeding and finished product discharge conveyors

Condition: good (used), Year of construction: 2010, 420 C 1000 - 290 Thermoplastic cylinder, complete, 40 mm, highly wear-resistant Selogica direct control system Hydraulic system with 2 control pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle, 40 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blow-out device 1 Selection unit, lateral installation, including connection Core pull, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket distribution: 1 CEE, 1 Schuko, additional Interface for printer, serial USB CompactFlash interface for data set storage User authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Extended monitoring Equipment package: Extended movement sequences Equipment package: Production control Equipment package: Optimization / operating aids Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and parts list Hfodpfx Aqezi A N Doisk Without granulate hopper 50 L

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Hjdpfx Asx Eitboqiefk Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Hsdjx Eiq Hjpfx Aqisfk Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm Hfodpfxsx Eithj Aqiek

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Hodpfxox Eirqo Aqisfk Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Hfedpfx Aqoy Snapsijk Ausstattung: .Kernzug -Roboter

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. Hfsdjv D Nxljpfx Aqisk The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: excellent (used), Year of construction: 2003, operating hours: 68,963 h, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 1,620 bar, injection weight: 97 g, mold height (min.): 200 mm, Arburg 370S-600-150 injection molding machine (258) Number: 258 Availability: in stock Year of production: 2003 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 97 Injection pressure [bar]: 1620 Closing force [kN]: 600 Column spacing [mm]: 370 x 370 Plate size [mm]: 570×570 Min. mold height [mm]: 200 Control type: Selogica Tongue: german Installed power [kW]: 22.5 Working hours [h]: 68963 Weight [kg]: 3630 Hfsdpfx Aqezhm N Soisk Dimensions [mm]: 4000 x 1500 Robot socket: Yes Air valve: 1x Core string: 1x Feed hopper: NO