Used Brandt Ktd 51 for sale (95)

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control Codpfsy Av A Hsx Abwohd - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Chjdpfjzux T Aex Abwod Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Chodpfxjvvkfwo Abwsd Storage location: Nattheim

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit Chsdpfxjzuyp Se Abwsd One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Chodpsxdy Slsfx Abwsd

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Codpfxezyahxj Abwohd Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: excellent (used), Gluing machine Guillotine cross-cut saws milling cutter Scraper Polishing machine Cedpfx Abettu Riowehd

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-261-04-5659, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 14 m/min, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Codpjydim Tsfx Abwohd Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Codpjyzm E Njfx Abwjhd Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Cjdpfx Aszyaiisbwjhd Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Chjdpsvvkd Tjfx Abwjd Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Cjdpfx Absxw Tngswohd Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Codpfxjq Ehpae Abwohd Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Cedpfoy N Ukiex Abwshd

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Chjdpfx Ajqy Em Tjbwjd

Condition: used, machine/vehicle number: 008554, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Cedpfx Aezg D Ezebwjhd

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Cedpfx Aszmtivobwohd Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Csdpfxsh U Nzpe Abwohd Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Chjdpfx Aboynhwfjwod Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, machine/vehicle number: 008552, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Cedpezg D D Defx Abwshd Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 1988, used, good conditionmanufactured by Brandttype F10 + EK 11 - trimmingbuilt in 1988Masch.-No. 0-260-01-2188/0-260-01-2746required space ca. 1100 mm x 1100 mm x 1700 mmlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revision,without guarantee and warranty Csdpfxsvwf Txe Abwehd

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Csdpfx Asy Nk Ahebwehd Grooving Unit: yes Max feed speed: 18 m/min

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm Chodpeyzm R Sofx Abwjd MACHINE DETAILS Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit - Glue scraper unit - Brushing unit External reference: MMG013

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm Codpfxsgylrlo Abwehd -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Chedpfsxw Tugox Abwjd Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking