Used Calibration System for sale (869)

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Ijdexhf Tiopfx Ag Nstn Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: excellent (used), REF: MM6203 1 x Fortress Technology metal detector with flip-arm reject into 2 x reject bins. Technical specification ⚙️ ✅ Model - Stealth. ✅ Aperture dimensions - 450mm wide x 150mm high (115mm useable). ✅ Belt dimensions - 2000mm long x 380mm wide. ✅ Last calibrated - March 2023 Ijdpjxdincsfx Ag Nstn

Condition: used, Ulma FR-305 flowpacker Itsdpfxexnklkj Ag Non recently acquired and in fully operational condition. The system requires minor service or calibration to prepare it for full-scale production, but all components are complete and functional.

Condition: ready for operation (used), Year of construction: 2016, Main Drive Isdsxllplopfx Ag Notn Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 1500 mm Z-Axis Movement 700 mm Additional Equipment Renishaw PH10M Plus head Air Supply: Clean compressed air required Ambient Temperature: Stable temperature (20 °C ±1 °C) required This 5-axis LEADER Miracle NC8157 was manufactured in 2016. It features a Renishaw PH10M Plus head and a range of 1500x800x700 mm, fully calibrated for precise measurements. Consider the opportunity to buy this LEADER Miracle NC8157 CMM machine. Contact us for more information. Application Types Measuring

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 1438016140010, Checkweigher Itedpjxnmy Rsfx Ag Njn Mettler Toledo / Garvens Model C3570 Year built: 2020 Weighing capacity: 360–1400g Calibration still valid Software included

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 19-00455, Equipment: type plate available, Werth Messtechnik Tomoscope XS 160 Source: werth.de/en/products/devices/d/computed-tomography/device/tomosc ope-xs.html "Measurements using X-ray tomography for production and inspection room The transmission tube—used here for the first time in a monoblock design—enables a small focal spot even at high tube power, allowing for rapid measurements at high resolution. The monoblock design for the tube, generator, and vacuum system has also been implemented as an open construction for the first time. This results in extended maintenance intervals and a theoretically unlimited service life. Application areas include 3D measurement of connectors, plastic housings and covers, 3D printed workpieces, packaging materials, PET bottles and preforms. The TomoScope® XS (utility model) can also be used for tool correction. Measurements taken on the workpiece allow for verification of both tool functionality and wear. Workpieces can be inspected for indications of tool breakage and burr formation, for instance." "Additional advantages - The transmission tube’s monoblock design results in a small focal spot even at high tube voltage, enabling measurements up to five times faster than conventional CT systems, with high resolution - The TomoScope® XS uniquely combines features from multiple device classes - The X-ray source unites the benefits of both closed and open microfocus X-ray tubes - Downtime and operating costs are minimized - Rapid return on investment due to low acquisition costs - Local subvoxel computation reduces probing deviations - OnTheFly tomography and real-time reconstruction enable fast measurements - Future-proof design for easy on-site upgrades of tube voltage and power—up to 160 kV or 80 W - Built as a fully shielded device compliant with radiation protection regulations - Standards-compliant calibration according to VDI 2617 for reliable and traceable measurement results, with DAkkS certificate option available" "Technical data Design: 3D CNC coordinate measuring machine with computed tomography sensor technology Measuring range: Max. workpiece dimensions D = 277 mm / L = 149 mm (depending on aspect ratio of the workpieces) Accuracy: Permissible length measurement deviation up to 4.5 µm" +++++ Application: Medical Device Manufacturer Itjdoxbgclspfx Ag Njn The system was inspected annually and approved according to §88 of the German Radiation Protection Ordinance (StrlSchV). Due to the low number of special production parts, the machine saw very little use overall.

Condition: used, This listing is for the Rainin E4 XLS Electronic Single Channel Pipette The unit is in full working condition and is ready for immediate use Large color screen with 360° trackball/joystick and carousel menu for easy navigation Iedexhf E Sopfx Ag Njtn Multiple pipetting modes: Standard: e.g., basic, multidispense, mix Advanced: titration, dilution, fixed‑volume, reverse pipetting True Manual mode: real‑time control over aspiration/dispense speed Independently adjustable speeds for aspirate, dispense, and mix RFID-enabled for tracking service info, calibration, and protocols (supports GLP/GMP)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 7,475 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, emission class: euro6, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 chassis 8x2H-4 Vehicle frame (wheelbase, overhang, ...) Itjdpfx Aoxplq Dsg Nsn * 3,505 mm main wheelbase * 1,795 mm wheelbase between front axles * 1,350 mm wheelbase between rear axle and trailing axle * Vehicle rear, straight frame end Axles * MAN HydroDrive, hydrostatic axle drive * Steering ratio, standard * Steering oil tank with electrical measuring probe * Front axle, 9,200 kg, not driven, cranked, steered, not liftable * Front axle fender * 2nd front axle, 9,200 kg, HydroDrive without drive-through, cranked, steered, not liftable * Transfer fender 2nd front axle * Rear axle HY-1350, 13,000 kg, HY axle without drive-through, straight, not steered, not liftable * Transfer fender rear axle * Trailing axle, 9,000 kg, non-driven, straight, steered, liftable * Fender extension * 9,500 kg spring load capacity front axle * 9,500 kg spring load capacity 2nd front axle * 13,000 kg spring load capacity rear axle * 8,000 kg spring load capacity trailing axle Driver's cab and driver's cab exterior * Driver's cab NN * Driver's cab suspension, Comfort * Driver's cab tilting device, manual * Lifting roof, mechanical * Bumper, steel, 3-part * Front access, integrated, with holding option * Windscreen, laminated safety glass (VSG), tinted * Sun visor, in front of windscreen * Windscreen washer system for windscreen * Windscreen wiper operation, manual * Entry, fixed * Central locking, with remote control * 4 vehicle keys * Door windows, tinted * Door window, safety glass * Rear wall Driver's cab, without windows Lights and signal tones on the outside of the driver's cab (headlights, horn, ...) * Without light and headlight package * Headlights, H7 * Daytime running lights, LED * Fog lights, H7 * Cornering lights, H7 * Indicators, side, LED * Headlight range adjustment, manual * Driving light switch, manual * 2 clearance lights, LED * 2 compressed air horns on the driver's cab roof * Preparation for rotating beacons * 2 rotating beacons on the driver's cab roof, 1 right and 1 left * 2 work lights on the driver's cab roof, 1 right and 1 left * Work lights, LED, white * Switch for work lights * Preparation for lighting in the cargo area Driver's workplace * Multifunction steering wheel, height and tilt adjustable * Steering wheel, with parking position * Steering wheel lock, with electronic immobilizer * Instrument cluster, basic km/h * Tachograph, digital, with remote communication (according to DSRC), CONTINENTAL * Tachograph/ Tachometer, calibrated * Remote download for digital tachograph * Preparation for toll collection system Toll Collect * Display of driving times, instrument cluster * 2 sockets, driver's cab in the middle, 12 V and 24 V * 2 pull-out cup holders in the instrument panel * MAN EasyControl Long Haul control panel, 4 functions, can be operated from outside when the door is open * Preparation for radio with CB radio antenna on the driver's cab roof * 4 single-DIN slots, roof rim Cab air conditioning * Air conditioning, Climatronic 0P2NT * Additional water heater, 4 kW Driver's cab interior * Moon Grey color ambience for driver's cab interior 0P2I6 * Interior styling analogous to color ambience 0PGBT * Sun visor for windshield, inside, foldable 0P2FE * Roller blind for door side windows, inside, mechanical, driver's side 0P2FH * Interior light, reading light (both sides) 0PKMZ * 2 reading lights, 1 on driver's side and 1 on passenger side * Entry lighting 0P2IO * Entry handles, standard 0PHPK * Interior door panel, not washable 0P2IB

Condition: used, Year of construction: 2009, For Sale: Full Yamato–Audion Packaging Line A complete Yamato–Audion packaging line, recently acquired and in fully operational condition. The system may require minor service or calibration to prepare it for full-scale production, but all components are complete and functional. Line Components - Yamato 14-Head Weigher (Rigidized Materials) - Model: Yamato ADW-314SW - High-precision multihead weigher, suitable for granular or small-piece products. - Audion Packaging Machine - Model: AVMS-190HS-2 - Designed for small and narrow bags, ideal for food, hardware, or specialty items. - Stainless Steel Platform with KEY Vibratory Feeder - Integrated platform with a KEY vibratory feed chute, ensuring smooth and consistent product infeed to the Yamato weigher. Iodpfx Agoxni U Ro Notn - Safeline Metal Detector - Complete with Safeline metal detection system, integrated into the line for reliable product quality and safety control. Key Details - Fully integrated and synchronized system. - Compact footprint — suitable for production or pilot-scale operations. - Originally used for small-format packaging applications. - Located in Emmeloord Condition Operational, complete, and in good mechanical shape. Requires light servicing before production use. Availability Immediate. Inspection possible upon request.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) Iodpsg N Nlvsfx Ag Netn 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Year of construction: 2008, functionality: fully functional, MEASURING ARM FARO FUSION Year of manufacture: 2008 Measuring range: 2400 mm Software: Polyworks (please download the current version from the Polyworks website, ours is for Win XP) Dongle for the software is present and included Accessories: measuring spheres, tools, spare battery, cables, charger, and original transport case Last calibration: 2020 REV 26.8 Single point: 0.0510 mm Volumetric: 0.710 mm Further details can be found in the pictures Itodpfexmrymjx Ag Nsn

Condition: used, This listing is for the Astoria Pacific Chemistry Analyser The unit is in full working condition and is ready for immediate use The Astoria-Pacific Chemistry Analyser is the standard single‑rack sampler module designed for the Astoria segmented flow analyser system—a precision instrument used in environmental, industrial, and research labs. Key Features Iodpfsxhft Aox Ag Njtn Random‑Access XYZ Probe Moves in X, Y, and Z axes to target individual samples with a 12-place dedicated standards/calibrant rack Single Wash Station with Dedicated Pump Maintains probe cleanliness and avoids cross-contamination using an independently controlled wash reservoir and pump Supports Multiple Rack Types Compatible with both sample cups (2 or 4 mL) and test tubes (12–16 mm), and supports up to 102 total positions (90 samples + 12 standards)

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for 1. Astoria-Pacific 311 AutoSampler Itodpfoxhftijx Ag Nen 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Support Modules For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Condition: used, This listing is for the Adam Solent Precision Analytical Balance The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Iodpfsxhfrxjx Ag Netn Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Itjdpfx Agsxhfqbs Non Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Itsdpfsxhfl Esx Ag Nsn Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Itsdpfx Agsxhflxs Njn Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: used, This listing is for the Leibherr Mediline LKPv 6520 Refrigerator Itodpfxexhfiqs Ag Njn The unit is in full working condition and is ready for immediate use Overview: Liebherr LKPv 6520 MediLine Laboratory Refrigerator The Liebherr LKPv 6520 MediLine is a high-performance laboratory refrigerator crafted for the demanding environments of hospitals, pharmacies, and research labs. Here's a comprehensive breakdown of its features and specifications: Key Specifications Type: Lab refrigerator with professional electronic (Profi) controller Dimensions: 216 cm (H) × 70 cm (W) × 83 cm (D) Capacity: Gross: ~602 L Net: ~430 L Temperature & Cooling Temperature range: Adjustable from –2 °C to +16 °C Cooling system: Dynamic (forced-air) cooling ensures rapid and even temperature distribution Temperature control & accuracy: Electronic controller with digital display Precise 1-point temperature calibration (increments of 0.1 °C) Compliant with EN/IEC 60068‑3 temperature stability standards

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Itedjxhfgvopfx Ag Non Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification

Condition: used, This listing is for the VWR Digital Heatblock 11 Drybath The unit is in full working condition and is ready for immediate use Itjdpfx Agsxhfgpj Nsn Core Features & Capabilities Precision Temperature Control Uses PID microprocessor control, typically offering stability and uniformity as precise as ±0.1 °C. Temperature range often spans from ambient +5 °C up to approximately 120 °C, with some models reaching 150 °C, depending on configuration. Flexible, Modular Design Supports interchangeable modular aluminum blocks, accommodating a wide range of vessel types—microtubes, PCR strips, centrifuge tubes, vials, and microplates. These blocks often include a thermometer well and are engineered for close tube-to-block contact to maximize heat transfer. Digital Interface & User Safety Features LED or touchpad controls, with separate displays for set-point and actual temperature, plus a timer function with audible alarm when the set time or temperature is reached. Equipped with safety enhancements such as a “Hot” warning light when the block temperature exceeds around 40 °C. Calibration mode often allows you to calibrate using an external temperature device (RTD probe). Versatility & Applications Ideal for a broad range of lab uses including enzyme reactions, immunoassays, DNA denaturation, ELISA, melting/boiling point determination, activation or incubation of cultures, protein denaturing, and other routine laboratory protocol

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Isdpfx Agjxhfffj Njtn Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, This listing is for the Mettler Toledo 5 Easy FE20 Benchtop Meter The unit is in full working condition and is ready for immediate use The FiveEasy FE20 is a reliable, user-friendly benchtop meter designed for routine laboratory pH and mV/ORP measurements. It is celebrated for its simplicity, compactness, and solid precision. Key Features & Design Compact, bench-saving footprint: With dimensions of approximately 227 × 147 × 70 mm (9 × 5.7 × 2.7 in) and a weight of just 0.63 kg, this meter fits neatly into tight lab spaces. Removable sensor holder: The probe arm can be detached and magnetically stored on the side, freeing up space when not in use. Large, segmented 4.3-inch LCD display: Clearly shows measurement, temperature, calibration status, and icons for electrode and endpoint conditions. Intuitive control: Five self-explanatory buttons make for straightforward operation—ideal for quick measurements or calibration. Measurement Capabilities pH range: 0.00 to 14.00, with a resolution of 0.01 pH and accuracy of ±0.01 pH mV/ORP range: –2,000 mV to +2,000 mV, with 1 mV resolution and ±1 mV accuracy Temperature range: 0 °C to 100 °C (32 °F to 212 °F), 0.1 °C resolution, ±0.5 °C accuracy Temperature compensation: Supports both Automatic (ATC) and Manual (MTC) modes Calibration: Up to three-point linear calibration, using four predefined buffer groups Ijdpfxjxhd Nis Ag Nstn Connectivity, Memory & Output Sensor inputs: Accommodates BNC, Cinch/RCA, and NTC 30 kΩ connectors Analog output available, plus automatic/manual endpoint recording and acoustic/visual signals for endpoint detection Memory: Retains only the current calibration data—no archival of past readings. Power & Build Versatile power supply: Accepts 100–240 V AC (50/60 Hz) and supplies 12 V DC internally Durable ABS construction: Lightweight yet sturdy, designed for regular laboratory use. Typical Applications Used in a wide variety of environments including environmental testing (water, lakes), agriculture (soil pH), industrial processes (cooling/cleaning water, product QA), and food and beverage production (yogurt, cheese, sauces, etc.) Its straightforward operation suits both advanced labs and educational settings.

Condition: used, This listing is for the Sievers M9 TOC Analyser + Sievers Autosampler The unit is in full working condition and is ready for immediate use The Sievers M9 is a versatile Total Organic Carbon (TOC) analyzer designed for monitoring water quality across various applications—from ultrapure water systems to process and environmental streams. Offered in laboratory, portable, and online configurations, it excels in accuracy, efficiency, and automation. Key Features: Ultra‑wide detection range: From as low as 0.03 ppb to as high as 50 ppm (0.03 ppb–50 ppm) Scribd Fast analysis: Standard TOC results in about 2 minutes, with an optional Turbo mode enabling results every 4 seconds Membrane Conductometric Detection: Relies on UV/persulfate oxidation to convert organics to CO₂, measured with a sensitive membrane-based conductometric sensor—a method known for stability and precision Low upkeep: Minimal preventive maintenance required; calibration remains stable for up to 12 months Ease of use: Large touch-screen LCD, streamlined protocols, built-in error troubleshooting, intuitive database and data export capabilities Regulatory compliant: Supports major pharmacopeias (USP, EP, JP16, CP, IP) and designed for applications in pharmaceutical water (PW/WFI), cleaning validation, microelectronics, power, and more Versatile sample types: Accepts grab samples, sipper systems, or continuous online sampling (On‑Line model) Iedpfx Aoxhdybsg Notn Optional Enhancements: Stage 1 Conductivity Measurement: Can measure conductivity alongside TOC from the same vial—time-saving and efficient Inorganic Carbon Remover (ICR): Improves accuracy for samples with high inorganic carbon content DataPro2 Software: Enables advanced sampling protocols, integration of up to four analyzers, automated calibration/validation workflows, and compliance features like DataGuard for 21 CFR Online (On‑Line) capabilities: Provides continuous monitoring via USB, Ethernet, 4–20 mA outputs, and Modbus TCP/IP; robust IP‑45 rated enclosure for challenging

Condition: used, This listing is for 1 of 2 Cecil CE1021 Spectrophotometers The units are in full working condition and ready for immediate use The Cecil CE1021 is a single‑beam UV/Visible spectrophotometer in the Series 1000 line from Cecil Instruments. It’s designed for general laboratory work, including educational, quality control, and routine analytical tasks Features & Functionality Automatic functions at switch‑on: self‑test and calibration. The instrument calibrates itself on Lamp / filter switching: Automatic lamp and filter selection coupled to the wavelength chosen. For example, if you select a UV wavelength, it will switch in the deuterium lamp; if you stay in visible, that lamp can be turned off to save life. Absorbance Zero and 100% Transmission setting: Zeroing via button, both at absorbance zero (0 A) and full transmission (100 %T) automatically or by pressing buttons. Iedpfx Aexhduleg Notn “Peak Seek”: It has a function for automatically finding peaks, with baseline flattening. Useful for scanning spectra. RS‑232C Interface: There is a serial interface for connecting to a PC or printer in many units

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Itedpfx Agexhdqto Nsn Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis