Used Climatic Test Chamber for sale (16,481)

Condition: excellent (used), Weiss Here, we offer a Weiss emission test chamber. Mini - SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Bsdpfx Alezd Slko Ajln Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation; scope of supply: connecting flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3-phase + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ + 18-45 Condition: used Sale from our location Scope of supply: (Only the Weiss emission test chamber WT 5.1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system Bsdpfxozyndbj Al Ajln AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: excellent (used), Weiss TS 130 Thermal Shock Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: TS 130 Machine type: Thermal Shock Chamber Test chamber volume: approx. 130 liters For sale is a used Weiss TS 130 thermal shock chamber with a hot and cold chamber, a movable lift basket, SIMCON/32 touch control, and a separate air-cooled condenser/cooling unit. The system is suitable for temperature cycling and thermal shock testing, environmental simulation, material and component testing, electronics testing, quality assurance, as well as research and development. Technical data: Hot chamber: +60 °C to +220 °C Cold chamber: -10 °C to -80 °C Switching time hot/cold chamber: approx. 10 seconds Temperature stability: ±1 K Internal dimensions (W × D × H): approx. 500 × 600 × 450 mm Max. load lift basket: 20 kg Max. load per insert rack: 10 kg Refrigeration system: Air-cooled refrigeration cascade Separate condenser/cooling unit as shown in the pictures High-stage refrigerant: R404A / 2.2 kg Low-stage refrigerant: R23 / 1.2 kg Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standby pressure: 11 bar g Electrical data: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14.0 kW Rated current: 26.0 A Connection type: CEE 32 A Control / Equipment: SIMCON/32 touch control Hot and cold chamber Movable 130-liter lift basket Test chamber door with viewing window Separate air-cooled cooling unit Operating hour counter SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Dimensions / Transport data: External dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width incl. door hinge: approx. 1,850 mm Depth incl. removable door: approx. 1,155 mm Weight of test chamber: approx. 950 kg Separate cooling unit on pallet as shown in the pictures Freight / special transport possible Condition: Used - Year of manufacture 2008 Operating hour counter shows approx. 108.7 hours. Bjdpfxjzp D D Nj Al Aoln Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Weiss TS 130 thermal shock chamber Separate condenser/cooling unit SIMCON/32 touch panel SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2026, condition: like new (used), Binder KBF 720 E7 from 2026. Device is like new, 2-year warranty on spare parts. PRODUCT DESCRIPTION A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all important ICH requirements, from precision to programming and documentation. Features flexible water supply options for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber. KEY FEATURES Temperature range: 0°C to 70°C Humidity range from 10% to 80% RH Proven APT.line™ preheating chamber technology Energy savings of up to 40% compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Bsdpsy R Uaaofx Al Asln Cooling using environmentally friendly refrigerant R-600a Heated door to prevent condensate formation Adjustable fan speed Humidity control with capacitive sensor and fast-reacting steam humidification Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner doors made of metal oxide-coated safety glass Two stainless steel wire shelves 80 mm x 45 mm access port with silicone plug Freestanding unit with durable double casters and front brakes Intuitive controller with touchscreen and both segment programming and real-time programming Ergonomically adjustable control terminal Signal triangle with illuminated status indicator Internal data logger, measurement values in open format readable via USB Independent temperature safety device class 3.3 (DIN 12880) with visual and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Optional lighting modules for ICH photostability testing Optional LED lighting modules for plant cultivation

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Bsdpfjyit Hbjx Al Ajln

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Bsdpfx Alsy Dck To Ajln Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume Blsdpfxjy Dclqj Al Aen 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Bodpfxey El Tts Al Asln Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Bljdpozd Az Asfx Al Aen Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Year of construction: 2024, condition: like new (used), Memmert HPP 1060 eco chamber, manufactured in 2024. Ex-display unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 °C below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 °C below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Bjdpfx Ajzam E Sel Aeln Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity setting range 10 - 90% relative humidity Humidity humidity supplied via distilled water from an external tank using a self-priming pump Humidification humidification using a hot steam generator Dehumidification dehumidification using a desiccant unit employing Peltier technology Humidity setting accuracy 0.5% relative humidity

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, Bedpfxoy Dd Nqe Al Ajln total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Blodpjy Dciijfx Al Aen Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Bedpfsx Exmtjx Al Asln Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Maintenance documents available EC declaration of conformity available Application areas Bedszg U Tiepfx Al Asln Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Bodpfx Aljzam Hvj Aoln Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Condition: good (used), Year of construction: 1999, Nema corrosion test chamber for salt spray tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Bedpfju Ecrxsx Al Aoln Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters Bledpfx Aljzg Er As Asn For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Here we offer you a temperature shock testing chamber. Weiss temperature shock testing chamber, air-cooled Specification: Temperature range, warm chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Changeover time, warm/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): height 450 mm, width 500 mm, depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Blodpfx Alozp D A Ej Asn Type: TS 130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Bljdpozp D Alefx Al Aen Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Blsdpozp D Axofx Al Ajn Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Bledszp D Dispfx Al Ajn Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Switching time, hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Bedpfezp D A Sox Al Aoln Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Weiss Umwelttechnik GmbH Salt spray chamber / corrosion test chamber Used salt spray chamber Weiss SC/KWT 450 for corrosion, salt spray, and condensation water tests according to common industry standards. The system is suitable for material testing, coating testing, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters Bledpjzd Axbjfx Al Aen Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Salt spray test up to +50 °C Condensation water test up to +45 °C Humidifier up to +75 °C Power connection: 230 V / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment: Control unit Test chamber with sample holders Brine supply system Documentation / Service manual Accessories as shown in the pictures Scope of delivery Salt spray chamber Weiss SC/KWT 450 Documentation Accessories as shown in the pictures Condition Used, optical condition as shown in the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Bljdpezil T Sefx Al Asn Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: excellent (used), WEISS TECHNIK SC 1000 Salt Spray Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 1000 Machine Type: Salt Spray Test Chamber / Corrosion Test Chamber Test Chamber Volume: approx. 950 liters For sale is a used Weiss Technik SC 1000 salt spray test chamber. The system was developed for professional corrosion, salt spray, and condensation water testing and is ideal for testing laboratories, the automotive industry, research institutions, and industrial quality assurance. The system is equipped with a programmable color touch control panel, an Ethernet network interface, and a test chamber volume of approx. 950 liters. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of Manufacture: 2015 Test Chamber Volume: approx. 950 liters Power Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated Power: 2.6 kW Rated Current: 11.3 A Compressed Air Connection: 4–10 bar (max. 10 bar) Deionized Water: 3–5 bar Control System: Programmable color touch control panel Ethernet network interface RS232 interface Dimensions: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test Chamber Dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test Chamber Volume: approx. 950 liters Equipment: 950-liter test chamber Programmable color touch control panel Ethernet network interface RS232 interface Salt spray testing Condensation water testing Heated compressed air humidifier Integrated brine tank Compressed air connection Blodpfszlgyrsx Al Aon Deionized water Exhaust connection Transport Data: External Dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Transport Weight: approx. 220 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of Supply: Weiss Technik SC 1000 salt spray test chamber Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.