Used Climatic Test Chamber for sale (16,149)

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: SB11/300/40, For sale is a Weiss climate test chamber. Designation: SB11/300/40 Cooling-heating operation: -40...+180 °C Climate operation: +10...+95 °C Humidity range: 10...98 % RH Temperature stability The temporal temperature stability in climate mode is ±0.1...±0.5 K The temporal temperature stability in cooling-heating mode (without climate) is ±0.2...±0.5 K Humidity stability The temporal humidity stability across the entire operating range is ±2...±3 %RH Condenser: air-cooled Rate of temperature change: Hfjdpew Dygfjfx Ag Nen Cooling: approx. 3.1 K/min Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg / Power supply: 4.8 kVA Electrical connection: CEE plug 16 A Connection voltage: 400V/3Ph+N+PE/50 Hz (+6%/-10%) Refrigerant: R404A! Version: mobile Type: SB11/300/40

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. Hedpfxsph U Dhs Ag Njfn At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller Hjdpfxjihb Ams Ag Nefn LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: like new (used), functionality: fully functional, Year of construction: 2018, PK clima – Clean Rooms We can offer three different cleanroom configurations. Please let us know your required size: A x 150 m² (3 chambers) B x 320 m² (7 chambers) – 112 m² + 55 m² + 34 m² + 38 m² + 40 m² + 25 m² C x (please specify) Item 1) Cleanroom Block 1 approx. 150 m² Inlet with the following technical specifications: Hsdpfx Aow Dddzsg Nofn - Cleanroom Class ISO6 - Lighting: 300 lux - All doors equipped with electric locks Manufacturer and model: MGB - Clear room height: 2,500 mm throughout On-site extraction system: 500–2,000 m³/h Inlet slot: 1,800 x 50 mm Outlet 1: 3,700 x 50 mm Outlet slot: 1,800 x 50 mm 2 double doors 1 maintenance door • DIG Cell: Solvent extraction via industrial exhaust fan Manufacturer: Ghrd, with external drive motor and frequency converter Approx. 5 g/m² solvent applied to the panel Exhaust duct outlets 2 m above the cell Roof penetrations and sealing to be provided by the customer Negative pressure monitoring included 2 double doors • T Cell: Extraction via industrial exhaust fan Manufacturer: Ghrd, with external drive motor and frequency converter Exhaust air combined with that of the DIG cell Negative pressure monitoring to prevent solvent leakage to exterior 2 double doors Comprising: - Approx. 175 m² tongue-and-groove panel walls, RAL 9002, smooth finish, with eccentric fasteners - Multiple window elements integrated into the panel walls as per specification 6 doors with windows (double-leaf, clear opening 1,800 x 2,000 mm) 1 operating room door (single-leaf, clear opening 2,000 x 2,200 mm) 6 electric door locks as described 22 filter fan units (1,140 x 1,140 mm each), with F7 pre-filter, H14 main filter, EC speed-controllable motor Air volume: 2,350 m³/h Nominal power: 350 W Sound power: approx. 55 dB(A) Approx. 40 lighting units with cover (no LED) Approx. 200 m² cleanroom ceiling, make: O – metal ceiling 1 set of suspension structure for the metal ceiling, including maintenance grid for service and filter replacement from above 1 exhaust fan with ductwork 1 switch cabinet section for control Additional option: Item 3) Additional Air Conditioning for DIG Room To achieve the specified room temperature and humidity, an additional air conditioning unit is required: - Target room temperature: +20°C ±2K - Target humidity: 60% ±10% - Control integrated into main control cabinet

Condition: excellent (used), Feutron TPK 3403/15 Temperature test chamber -40 to +100°C Hsdpof E N Sxofx Ag Njfn

Condition: like new (used), Year of construction: 2025, Binder MKT 240 E5 Climate Chamber Chamber manufactured in 2025, only 66 operating hours. One-year warranty on spare parts PRODUCT DESCRIPTION Featuring a temperature range from -70°C to 180°C and highly realistic simulation capabilities, the BINDER MKT series stands out in its class. This chamber meets the highest standards of precision and performance in cyclic temperature testing. KEY FEATURES Temperature range: -70°C to 180°C 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated viewing window with interior LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with visual and acoustic alarm Intuitive touchscreen controller with segment and real-time programming Internal data logger; measurement values can be exported via USB in open format 50 mm access port with silicone plug, left side Independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm 4 castors, two with brakes PC connectivity interface: Ethernet Ramp function option Built-in linear recorder Real-time clock Hfedpfx Ajw U Rv Rjg Non Door heating Stainless steel wire shelf Stainless steel interior Halogen-free refrigerants R-452A and R-23 Cascade compressor cooling unit ensures optimal cooling

Condition: used, Description: Temperature test chamber Manufacturer: RS-Simulators / VTS 1200/75/S Temperature range: -75 to +180°C External dimensions: 2.30 x 2.30 x 2.80 m (L/W/H) Test chamber dimensions: 1.10 x 1.00 x 1.00 m (L/W/H) Hjdpfx Ajwp Ip Eog Nefn Unit: 2.30 x 1.30 x 2.00 (L/W/H) Average heating rate: approx. 5 K/min (from -40 to +150°C) Average cooling rate: approx. 5 K/min (from +150 to -40°C) Current: 38 A Connection voltage: 3 x 400V/NPE 50 Hz Weight: approx. 2700kg Item condition: used item Contact us if you have any questions Shipping: the stated shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany on request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to commercial customers without warranty or guarantee. Deviations from technical data as well as errors in the description of the items may occur and are reserved.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Hfjdpfx Agjph U Ays Nen Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Heraeus Vötsch climatic chamber Here we offer you a Heraeus Vötsch climatic chamber. Vötsch climatic chamber VCS 7033 water cooled Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min. Cooling 6,5 K/min. Hodepz H Hxspfx Ag Nsfn Humidity range: 10% to 98% r.H. Temperature deviation temporal ± 0.5 K Temperature deviation time-related ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x depth 1565 mm x height 1840 mm Lateral feedthrough 90mm ∅ approx. 330 L Weight: 600 kg voltage: 3/N/PE AC 400V ±6/-10% 50Hz rated power 9,5 kW Rated current 17 A Refrigerant R404A / R23 Type: VCS 7033 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2016, operating hours: 9,195 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Hedpfx Aot Txtteg Njfn Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Vötsch VT 7030 S2 temperature shock cabinet Test chamber / climate chamber -80 to +220°C Hodpfjwqb Ttex Ag Nsfn Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm

Condition: excellent (used), operating hours: 100 h, PERFECT CONDITION, purchased in December 2016 Used for about 100h New price is 46808 EURO The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests, carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC. High operating comfort and extensive standard equipment have obvious advantages in everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% relative humidity Hjdpfxovldnqs Ag Nefn Integrated 20 L water tank 4 potential-free relay contacts e™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostics system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB 2 access ports with 80 mm silicone plug, left and right Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes 230 V socket on the side panel on the right Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by a compressor unit

Condition: excellent (used), Year of construction: 2005, Vötsch Shock Test Chamber VT 7012 S2 Systems for Extreme Temperature Changes Temperature shock testing tests the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are exposed to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and the accelerated aging caused by temperature changes can reveal weak points in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the elevator car Car load capacity: 50 kg for the VT3 7012 S2 All-round gratings in the elevator car secure the test specimens High air circulation rate, short temperature cycling times, and even temperature distribution in the test chamber Hot chamber can be used as a temperature storage device, while the cold chamber can be used as a temperature cycling device Touch panel for convenient editing of simulation programs with graphic display Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A External dimensions Width: 930 mm Depth: 2115 mm Hedsph Uz Uopfx Ag Nofn Height: 1970 mm Test room dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Year of manufacture: 2005 Protection class Device: IP 42 Control panel: IP 20 Control cabinet: IP 54 Characteristics for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in steady state Temperature deviation over space: +_ 2 K in steady state in the elevator car Heating rate of hot chamber: 11 K/min Cooling rate of cold chamber: K/min Heating rate of cold chamber: 2 K/min Cooling rate of hot chamber: K/min Observation window: 355 x 355 mm Pipe penetration: 67 mm Weight: 1000 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Hjdpfx Agsv N Hc Ee Nefn Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Hfsdpfxet Txqrs Ag Njn Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: ready for operation (used), Heraeus Vötsch VC 0033 Climatic test chamber +10°C to +90°C with humidity Hfedpfx Ajrpi Nbjg Njn Humidity range: 30 - 95 Test chamber dimensions: Width 570 x depth 540 x height 570 mm

Condition: good (used), Year of construction: 1996, Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Hsdpfxowbpzme Ag Nsfn Item no.: 60885637 Temperature chamber Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of manufacture: 1996 TK 07 You will find further articles - new and used - in our store! International shipping costs on request!

Condition: excellent (used), CTS CW-60/6 – Climate Test Chamber, Water-cooled The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber allows for the testing of functional or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test specimen. The air conditioning compartment is located at the rear of the interior section. The technical assemblies are housed in a separate frame behind the unit, allowing easy access. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan. Technical Performance Data: Temperature Testing: Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate linear with test specimen, measured in supply air: Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Test specimen: 700 kg steel Thermal radiation: 2 kW during temperature change 5 kW steady-state at -40 °C Climate Testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% RH In dew point mode: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% RH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without irradiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 6,000 liters (6 m³) Internal dimensions (approx.): Height: ~2000 mm Width: ~2000 mm Depth: ~1500 mm (slight variations possible depending on configuration) External dimensions: Height: ~2300–2500 mm Width: ~2400–2600 mm Depth: ~1800–2200 mm (depending on door, frame, accessories, etc.) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 44.4 kW (incl. 5 sockets) Rated current: 84.7 A Protection class: IP54 Technical Design: Cooling unit: water-cooled, low noise, semi-hermetic, Hfodpfx Aewu Epgog Njn stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes Inspection possible by appointment (46325 Borken) Shipping by freight carrier possible – costs & organization upon request Scope of delivery: (see image) (Specifications subject to change and error!) For further questions, please contact us by phone.

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Hsdpet E Sfgofx Ag Njfn Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), Vötsch VC 7150-3/S Temperature and climate test chamber 1540 liters Vötsch VC 7150-3/S Temperature and climate test chamber Temperature -70°C to +180°C with humidity 10 to 98 Test chamber capacity: 1540 liters Temperature calibration values: +23 to 80 °C Temperature climate test: +10°C to +95°C Dew point temperature range: +4°C to +95°C Test chamber dimensions: Height: 950 mm Depth: 1475 mm Width: 1100 mm Weight: 1130 kg Electrical connection: 400 Volt Rated power: 13.8 kW You can find more items - new and used - in our store! International shipping costs on request! Hfedpfx Agephprfj Nen

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a known environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a variety of environmental conditions for scientific studies, product testing and process control. Data for temperature tests in single chamber operation Hot chamber: Temperature shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation in space ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber Test chamber 300 l Temperature range -80 °C to +70 °C Hfsdpfewbdv Sjx Ag Nsn Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation in space 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 1.5 K/min Cooling 4K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 % , 50 Hz Rated power: 30 kW Rated power: 50 A Refrigerant: R-404a /R-23 Chiller: Water-cooled Weight: approx. 940 kg Year of construction. 1998 Test room dimensions: Width 770 mm x depth 650 mm x height 610 mm Housing dimensions: Width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Further items - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Hfsdpfjph Uzxox Ag Non Temperature test chamber VT 7100 -70°C to +180°C 1035 liters Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Manufacturer: LIEBISCH Hedpfxepbv Dpo Ag Nsfn Type: 42016001 Test chamber : 1000 liters

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Hfodoxantcepfx Ag Njn Good condition

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) Hedoxanrxepfx Ag Njfn The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition