Used Climatic Test Chamber for sale (15,016)

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled Cedpfx Aajyglb Se Nogp The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: good (used), Year of construction: 1996, Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Item no.: 60885637 Temperature chamber Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of manufacture: 1996 Csdpfx Aewbpzmoa Negp TK 07 Financing through our bank is also possible. komplett-konzept.leasingo.de You will find further articles - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a known environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a variety of environmental conditions for scientific studies, product testing and process control. Data for temperature tests in single chamber operation Hot chamber: Temperature shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation in space ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cgsdpjwbdv Sjfx Aa Nsp Cold chamber: Temperature shock test chamber Test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation in space 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 1.5 K/min Cooling 4K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 % , 50 Hz Rated power: 30 kW Rated power: 50 A Refrigerant: R-404a /R-23 Chiller: Water-cooled Weight: approx. 940 kg Year of construction. 1998 Test room dimensions: Width 770 mm x depth 650 mm x height 610 mm Housing dimensions: Width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 -70°C to +180°C 1035 liters Cgsdpfx Aoph Uzxsa Nop Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. Codpfswwg Uvex Aa Njgp This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Cgsdpfsx Exmtsx Aa Nep Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Csdpfxjxal Hao Aa Njgp Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1999, Nema corrosion test chamber for salt spray tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg Cgjdpfxou Ecrxe Aa Nsp Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Cgodsh Rvh Sjpfx Aa Nep Year 2012 Weight 1400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window Cgsdpfx Aoycvd Nea Nep - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Codpeya Ev Nofx Aa Nsgp Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Cgodjrt U Nuspfx Aa Nop Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Cgedpfxjyit Hbj Aa Njp

Condition: used, Year of construction: 2013, 1.0 pc. used conditioning chamber Manufacturer: CONDIMAT Cgedpjyat Tiofx Aa Njp Model: P12 AD Year of manufacture: 2013 Loading: With automatic platform for 12 mesh box pallets Comprising the following components: - Chamber with door and platform trolley, dimensions (approx.): 3.60 m x 2.90 m x 2.90 m - Control cabinet - ECO Heater heating system - Reverse osmosis unit - Vacuum pumps

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco climate chamber. Chamber directly from the manufacturer, fully tested and functional. Codpfx Aasymy Ute Negp Climate chamber ICH 750L, 115 V, lighting module ICH Q1B option 2, light intensity 8000 lux, 4 fluorescent tubes with cool white light – 2 tubes with UV lamps. Temperature range from -10°C to +60°C without humidity, with humidity 0-60°C, RH 10–80% – ICH750L. Included: software on USB stick.

Condition: excellent (used), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, Air-Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependence on temperature range and humidity fluctuations: ± 2.5% RH over time, ± 3.0% RH Internal dimensions (WxHxD): 500 × 750 × 600 mm External dimensions (WxHxD): 910 × 1590 × 973 mm Microprocessor control with 10 pre-set international test standards and 20 freely programmable memory slots, as well as built-in timer with programmable start/stop automation and error code display. Programming via touch screen. Alarm display (audible and visual). Device protection against overtemperature: Overtemperature protection with two switching contacts Illumination of testing chamber Operating hours counter Test chamber volume: 225 liters Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A, max. current: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Buyer information for your security: The following procedures are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and technical details subject to change and errors!) Codpfx Aaox Iu I So Negp If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Cgjdpfxstr Dinj Aa Nsp Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. Outer dimensions: W x H x D: 860 x 1795 x 1000 mm Codpfxjpdm Uyj Aa Negp Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 l Voltage 230 V 1/N 50 Hz Rated current 37A Fuses 250 V , 2 x 3 A Type: EHS-221MD Temperature range: + 105°C to + 142.9°C Humidity range 75 to 100 % r.H. Temperature constancy: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heat-up or pressure build-up time: from 0 to 2.0 kg/cm² in about 60 minutes 390 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS Simulators Here we offer a test cabinet. Water cooled Cgsdpfx Aog Urq Ioa Nsp Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800mm (WxHxD) Outer dimensions: 1100mm x 1850mm x 1500mm (WxHxD) current consumption: 13,5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion proof operation not tested but Max 160°C in this Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS Simulators, water-cooled The chamber can be dismantled into 3 parts for transport (bolted) Temperature range: -30°C to +100°C Refrigerant: 20kg R-404A + 20kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test room dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68kW nominal power Voltage: 3x400V/PE; Current: 135A Type: KKM 40 / 45 S Further technical data will follow! For your security as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information are reserved!) We are happy to answer further questions by phone for you. Cedpoqw U Aajfx Aa Njgp

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Cgedpfek E Htyox Aa Nop Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Codpfou H U Twsx Aa Nsgp We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone. Cgjdpfewfddwex Aa Nop

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Cgedpfx Ajwfdniea Nep Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! Csdpowxc I Uofx Aa Nogp The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.