Used Colchester Mastiff 1400 for sale (64)

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm Nsdpfx Ahetuut Uo Ujwr TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Njdpfxow Uigus Ah Uowr Technical details shown on picture.

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret Nwjdpfsxgtrkjx Ah Usr - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: ready for operation (used), lathe Colchester Master Nwoded Hdqvepfx Ah Ujr

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm Nedpfxeuqkf No Ah Uowr spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm Nedpfxeufud Re Ah Ujwr total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Nwedpfxstr Ud Se Ah Uer Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Technical details shown on picture. Nedpoww Iriefx Ah Uswr

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC cycle lathe Year of manufacture: 2003 Control: Fanuc 210i-T Spindle bore: 102 mm Chuck: 315 mm Turret: 4-position Travel: X 300 mm / Z 2,000 mm Nwodewww Ndspfx Ah Ujr Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Tool package: 32 tool holders Various accessories, documentation

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm Njdpfx Aounruysh Ujwr

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 Nedpewavqxofx Ah Uowr The machine is working can be seen in production

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Njdjva Ef Tepfx Ah Uowr Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Operating instructions

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Parts shown by hand not come. Nwjdpfjww Haxsx Ah Ujr

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Nodpfxsv Tpane Ah Uowr Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Parat type tool holders Under power in our warehouse.