Used Edm for sale (513)

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Fully functional machine in good condition for its age, equipped with a guiding system (sliding guides). Gsdpfxszcww Re Akhokd The Matra Fanuc Tape Cut W2 is a classic and highly reliable CNC wire EDM machine manufactured in 1988. This machine combines the advanced technology of the Japanese Fanuc control system with the precision of the German Matra machine tool manufacturer.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Gjdoxwmacjpfx Akhskd Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Gkjdpfjw Ig A Hex Akhsd Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Incl. drawbar Gkjdpfxew E Hico Akhsd Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Unit price: €200

Condition: used, Year of construction: 2005, AGIECUT Challenge 2 eCut Godpfeua Uzfox Akhekd Year of construction 2005 TECHNICAL DETAILS X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 256 mm U/V axis: ±70 mm Cone angle: 30°/100 mm Cutting rate: > 300 mm²/min Quality: Ra 0.1 µm Thread height: 250 mm Tapping die: 1/2 mm Wire diameter: 0.1 - 0.33 mm Workpiece height: 250 mm Workpiece width: 550 mm Workpiece length : 750 mm Workpiece weight with/without bath: 200 / 450 kg MACHINE DETAILS Bath size : 700 l Dimensions : 2215 x 2215 x 2220 mm Net weight : 3600 kg

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm z 310 mm Includes cooler Machine is in excellent condition. Gjdpjzcdwwjfx Akhokd

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 Gedpszdinkefx Akhskd workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: good (used), Hello, we are offering a used Erowa alignment pallet D 115 for sale. The pallet has been inspected and is fully functional. Gedpfx Ajiryx Iokhskd

Condition: good (used), Hello, Gjdpfx Aksih Smajhjkd we offer used Erowa clamping beams in the following dimensions: 220mm 300mm 380mm 460mm Other dimensions would also be available. Delivery possible for an extra charge. If you have any further inquiries, we will be happy to address them.

Condition: used, EDM machine Sodick AQ 327L, year of manufacture 2006 EDM machine Sodick AG60L, year of manufacture 2020 Coordinate grinding machine Hauser 3 SM Gjdpfx Akszacrbshokd Surface grinding machine Okamoto, year of manufacture 1996 Cylindrical grinding machine Weiss W11, year of manufacture 2009

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° Gksdsy T It Espfx Akhjd X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Gkodpfozlx A Sjx Akhsd Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,497 h, travel distance X-axis: 320 mm, overall weight: 3,450 kg, number of axes: 3, This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details. • Operating Hours: Only 1,497 h (used as a training machine) • Measuring Resolution: 0.5 µm Gkjdpfszvplfsx Akhed • Machine Weight: 3,450 kg • Max. Workpiece Dimensions (L × W × H): 880 × 550 × 225 mm • Max. Machining Current: 64 A • Phases: 3 • Frequency: 50 Hz • Voltage: 380/400 V • Current: 16 A • Power: 5 kVA • CE Marking: Yes • With accesories as shown in the pictures

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 510 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, controller manufacturer: MITSUBISHI, number of axes: 5, This 5-axis Mitsubishi FX 20 wire edm machine was manufactured in 1999. It offers precision and efficiency for complex wire EDM tasks. Consider the opportunity to buy this Mitsubishi FX 20 wire edm machine. Contact us for more information. Gkjdpfx Akszvvcdjhjd

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, total height: 2,600 mm, total length: 1,940 mm, total width: 2,300 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 3,460 kg, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned, overhauled, and tested at our facility after receipt of your order. We would be happy to perform a customized test cut for you. Gkjdpfx Aezwl R Hekhsd You will receive a warranty of 6 months on all machine parts. We would also be happy to offer commissioning and training.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, overall weight: 7,400 kg, table load: 4,000 kg, number of axes: 3, This 3-axis ONA NX6 die-sinking EDM machine was manufactured in 2007. It features a working table dimension of 1,000 × 700 mm and an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 400 mm. With a maximum table load of 4,000 kg, this machine is designed for high-quality machining capabilities. If you are looking to get high-quality die-sinking capabilities, consider the ONA NX6 machine we have for sale. Contact us for further details. • Working table dimensions: 1,000 × 700 mm • T-slots: 3 × 12 mm, 210 mm spacing • Maximum distance between table and head holder: 730 mm Gkodpjzuzafofx Akhjd • Maximum workpiece dimensions: 1,700 × 950 × 650 mm • Maximum electrode weight: 500 kg • Tool clamping system: EROWA • Dielectric tank dimensions: 1,700 × 1,000 × 650 mm • Machining accuracy: 0.05 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Total installed power: 9 kW • Electrical power rating: 20.3 kVA • Voltage: 400 V • Frequency: 50 Hz • Current: 29.3 A • Required air supply: minimum 6 bar • Total weight: 7,400 kg • Generator unit weight: 1,300 kg

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Gksdpfxszxq Iyj Akhed Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, VOLLMER QXD 250, 6 CNC axes, Vpulse EDM, automatic workpiece loading. Disc eroding machine for complete machining of PCD-equipped rotary tools – measuring, eroding, grinding, and optionally polishing in a single clamping. Technical data QXD 250 + HC 11 CNC axes: 6 Max. workpiece diameter: 320 mm Max. workpiece length: 250 mm Max. workpiece weight: 25 kg HC-11 capacity: 64 workpieces Max. HC-11 loading: 1,200 kg Erosion/grinding wheel diameter: max. 200 mm Main spindle: 4,500 min⁻¹ Torque: 6 Nm X1 / Y1 / Z1: 520 / 970 / 420 mm Coolant tank: 310 liters Machine connection power: approx. 8.7 kVA / 6.8 kW Machine weight QXD 250: approx. 7,200 kg net Dimensions QXD 250 + HC 11 Gsdpfxoz Eympo Akhjkd approx. 4,012 × 3,730 × 2,400 mm

Condition: used, Hello, we are offering two used Erowa precision holders 15 including clamping pins. They have been disassembled and cleaned by us and a functional test has also been carried out. The holders have the usual signs of use but are technically in very good condition. Price for both holders with clamping pins plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Gsdoq Hu S Depfx Akhokd

Condition: like new (used), Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg Gkedpfowa Rhxjx Akhed Coolant R410A. 1000 g 5 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Gkjdpfx Aksycckcehed Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: excellent (used), functionality: fully functional, We are offering a variety of used 3R systems here. The systems are in very good condition and fully functional. Inspection is possible by appointment. Pos. 1 System 3R-203, Rotating element WEDM 360° Pos. 2 System 3R-201J, Adapter WEDM 90° Gkodpfx Aexqn Ubskhsd Pos. 3 System 3R-201J, Adapter WEDM 90° Pos. 4 System 3R-201J, Adapter WEDM 90° Pos. 5 System 3R-202, MiniBlock Pos. 6 System 3R-202, MiniBlock Pos. 7+8 System 3R-204, Height adjustment adapter WEDM Pos. 11 System 3R-602.21, Manual chuck Macro, System 3R-200-4J-2, 470mm Pos. 18 System 3R-239–545, 0006-V01 System 3R-239–495 Shipping and inspection are possible!

Condition: good (used), We offer here a used UPC chuck with airdock ER-139501 / ER-078728. Additionally with an adapter pallet compatible with ER-115304 for use on milling, grinding, measuring, drilling and die-sinking EDM machines. The chuck has been cleaned and relubricated by us and is in very good technical condition. Gsdpfx Akjviul Ijhokd Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Gjdpfxez Hzz De Akhskd

Year of construction: 1995, condition: ready for operation (used), Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible. Godpfxoyugmfj Akhokd