Used Hand Spindle Press for sale (32,354)

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Year: 1978 Levelling straightner RASTER 12 180/19.150-1 New 1986 incl. Decoiler  incl. Feeder  Capacity Kg: 40000 Table Length:590mm Itsdpfex S H Ilex Addeb Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Gear ratio 1:6 Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Itodpfxjwz I Tbo Addjb Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned Itsdpfx Ajx A U Ncsddob • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Fensterpresse Orma Max. 4000x2700mm Isdpfx Adox Svw Nodotb 380V, 2,2kW - Documentation available: No - CE certificate present: No - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Itsdex Dd Idspfx Addjb Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Ijdpfx Adovtpq Hodotb Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2003, pressure . t throat . mm Itodew Syfcepfx Addeb stroke . mm total power requirement . kW weight of the machine ca. 4 t

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Iodow Syd Eepfx Addjtb

Condition: used, Year of construction: 1999, stroke 1000 mm Itodpfxow Sydfe Addjb diameter of piston 70 mm

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Itjdpfx Adjx Sx Spodjb

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Ijdpjqc S Nasfx Addotb

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iodpfex Sxukox Addstb

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Ijdpfex Sw Suox Addstb Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Ijdpfoulwzmjx Addetb Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Iodpfx Adek S Htxsdetb Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Ijdpeya Iaqofx Addstb Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a Itsdpfx Adjxpxhvjdsb bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1983, Pneumatic frame press, 4 vertical cylinders, 2 horizontal cylinders, cylinder stroke 110 mm, vertical pressing force 1100 kPa at 15 bar, horizontal 700 kPa at 15 bar, dimensions 3700 x 1850 mm, pressing/installation dimensions 4370 x 2330 x 730 mm, in good condition. Price ex-location. Transport available at extra cost! Ijdpfx Asyaywusddetb

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale Press Paal Konti 200 D, year of manufacture 2000, optional with matching conveyor belt Paal KEM-1400 Technical Specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Itsdsx Tflfopfx Addeb Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Full documentation available. Please note: All technical data are based on information from the manufacturer. We assume no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles Itedpfxeyath Tj Addjb - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 Itedpfx Adehlnzksdjb double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 Isdpfx Ajx R S Nrjddetb - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, total height: 2,200 mm, total width: 1,200 mm, total length: 2,680 mm, Empty weight: 950 kg Price: On request Table milling machine Itodpfx Aowl I E Eoddsb Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, condition: good (used), Offered is a stainless steel hand wash basin with sensor, measuring 400 x 310 x 240 mm, 220V. Entirely made of V2A. In very good condition. Year of manufacture: 2021. Further details upon request! Payment in cash or in advance. Sale only to commercial customers, no warranty or guarantee. Itedpfxsya Imwo Addeb

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Offered is a stainless steel hand wash basin with sensor, 470 x 410 x 240 mm, 220V. Fully made of V2A (AISI 304) stainless steel. In very good condition. Year of manufacture: 2012 Further information available on request! Payment by cash or advance payment. Iedpfx Adjya Imdodjtb Sale to commercial customers only. No guarantee, no warranty.