Used Homogenizer for sale (321)

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 75, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,262 kg, Tonelli PN200 planetary mixer with 2 bowls and 3 attachments. The Tonelli PN200 is an industrial planetary mixer designed for the preparation and mixing of various food products. Its robust design allows for intensive use in production while ensuring a homogeneous and consistent mix. The machine is supplied with 2 bowls and 3 mixing attachments, offering good versatility depending on the preparations. Year of manufacture: 1995 Suitable for the production of: Pastes Creams Fillings Various food preparations Main features: Bowl capacity: 200 liters 2 bowls 3 mixing attachments Stainless steel construction Knedpfjzu S Rnsx Abvsc Planetary mixing system Technical specifications: Model: PN200 Manufacturer: Tonelli Voltage: 380V

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Ksdpfx Aox Antuebvonc Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: used, This listing is for a IKA RCT CL S2 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT CL S2 Heating Magnetic Stirrer is a reliable laboratory device designed for efficient stirring and heating of various substances. Part of the IKA RCT series, it combines precision, safety, and durability to meet the demands of modern laboratories. Kodpfoxxz Udsx Abvjnc Key Features: Precise Temperature Control: Offers a temperature setting range of 0 - 310°C with a resolution of 1 K, ensuring faster and accurate heating of the medium. Wide Speed Range: Adjustable speed from 50 to 1500 rpm, with a setting accuracy of 10 rpm, making it versatile for different stirring needs. Safety Features: Equipped with a hot top indicator, digital error code display, and an adjustable safety circuit for heating plate temperatures (50 - 360°C) to prevent overheating and ensure safe operation. Efficient Magnetic Stirring: Utilizes a strong motor, capable of stirring volumes up to 20 L (H₂O), suitable for large-scale or intensive laboratory tasks. Durable Heating Plate: Constructed from aluminum alloy, the heating plate delivers optimal and homogeneous heat transfer for consistent results. Advanced Connectivity: Includes USB and RS232 interfaces for easy control and documentation of test parameters using a PC, and compatibility with labworldsoft laboratory software. Technical Specifications: Dimensions: 160 x 85 x 270 mm (W x H x D) Weight: 7.29 pounds Wattage: 600 watts Material: Aluminum alloy Brand: IKA Manufacturer: IKA WORKS, INC

Condition: ready for operation (used), functionality: fully functional, Industrial meat slicing machine for boneless meat The EBAKI 1 V horizontal slicer provides consistent cutting of boneless meats. It is particularly suitable for the poultry industry, but can also process pork, beef, turkey, or certain processed meats. This allows for obtaining multiple fillets or slices parallel to each other from a single piece of meat. Knodjzv N Rzopfx Abvsc This technology meets the needs of cutting workshops, meat processing companies, and manufacturers of processed products. Furthermore, horizontal cutting provides a more consistent thickness while improving the presentation of the finished product. Precise horizontal cutting The product moves between a lower conveyor belt and an upper conveyor belt. These two conveyors hold the meat in place as it passes through the cutting area. Then, the blades perform an alternating movement in opposite directions. This ensures that the product remains stable and the resulting fillets are consistent and parallel. This system also minimizes material loss during cutting. Consequently, it helps to better utilize the meat and standardize portions. Diverse applications The EBAKI range can perform horizontal slicing of chicken breasts, turkey, beef, pork, sausages, or bacon. The manufacturer also offers applications for cordon bleu, cooked chicken breasts, and certain extra-thin cuts. Thanks to this versatility, the machine can be integrated into various production lines. It can be used after the preparation or trimming of the meat. Then, the fillets can be transferred to a marinating, cooking, coating, packaging, or freezing line. Cleaning and production integration The EBAKI design provides easy access to the cutting elements and conveyors. In this range, guides and belts can be disassembled without tools to simplify cleaning and maintenance. The EBAKI horizontal slicer is therefore a suitable solution for companies seeking consistent cutting, better utilization of raw materials, and more homogeneous production. Technical specifications: Brand: EBAKI Model: 1 V Type: Horizontal slicer for boneless meat Year: 2022 Serial number: 22 234 12 20 Power: 1.5 kW Voltage: 400 V Power supply: 3 phases + neutral + ground Frequency: 50–60 Hz Current: 5 A Weight: 460 kg L4MFJ3V6

Year of construction: 2015, condition: ready for operation (used), A hydraulic three-roll mill Lehmann for fine grinding, dispersing and homogenizing is available. Working width: 600mm, roll diameter: 300mm, weight: approx. 1900kg. Including electrical control cabinet and accessories. Documentation available. An on-site inspection is possible. Kodpfx Abszli Uxjvonc

Condition: used, This listing is for a Fisher Scientific TopMix FB 15024 Knedpfxexzh R De Abvec The Fisher Scientific TopMix FB 15024 is a laboratory vortex mixer designed for mixing small to medium-sized sample tubes. It is commonly used in research and clinical laboratories for applications such as sample preparation and homogenization. The Fisher Scientific TopMix FB 15024 Vortex Mixer offers precision and reliability for thorough sample agitation. Ideal for laboratories requiring consistent mixing, the TopMix FB 15024 is designed to handle tubes and containers of various sizes with ease, ensuring uniform sample preparation across a range of applications. Its robust construction and user-friendly interface make it a staple piece of equipment in any scientific research setting.

Condition: used, Year of construction: 2021, Overview  This inline dosing system was manufactured in 2021 by AGATHA (Italy). The AGATHA PRO is a compact automatic unit for precise dosing of liquid stabilizers such as Gomasol and Estabicel in wine production. It can be integrated directly into bottling or filtration lines and ensures accurate, homogeneous dosing through its flow-controlled injection system. The machine is in good condition and ready for use. Kodpfx Abeyb Tafsvjnc Technical data  - Application: Dosing of liquid stabilizers in winemaking - Structure: Stainless steel AISI 304 - Dimensions (L × W × H): 160 × 60 × 80 cm - Weight: 140 kg - Control: Touchscreen with dosing software - Power Supply: 230 V, ≈500 W - Features: Flow sensors, alarms, IP65 protection, easy line integration

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. Ksdpfxjz Nk T Ne Abvonc - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER

Year of construction: 2026, condition: new, New portable homogenizer with a 145 mm diameter rotor, made of AISI 316L in all parts in contact with the product, and with a polished finish Ra < 0.80 μm. Kedpjzktgcsfx Abvsnc It can withstand vacuum and a working pressure of 16 bar, and its motor has a power of 7.5 kW, providing a rotation speed of 2,930 rpm. It includes an atmospheric system for solid intake, which allows the direct injection of powdered solids into the homogenizer's intake. This process solves the problems of incorporating floating solids and improves processing time if all other ingredients are loaded through the hopper, as they are added directly to the homogenizing chamber. The hopper has a capacity of 50 liters and features a butterfly valve, which allows it to be closed and the inlet flow rate to be regulated. All components are mounted on a wheeled cart to facilitate mobility. Production: 5,000 L/h Motor: 7.5 kW at 2,930 rpm 50 Hz Intake: DN50 Outlet: DN50

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. Knsdpfxjy Aggpj Abvsc 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: used, for lacquered, high-gloss furniture fronts Front size: minimum 180 x 90 x 10 mm, maximum 4000 x 1300 x 50 mm Maximum workpiece weight: 80 kg One tool head Front shape: Rectangle with automatic size and thickness detection, no setup time required Fast sanding and polishing of high-gloss furniture fronts and Corian® Optimal, homogeneous high-gloss surface Low running costs due to standard sanding and polishing agents Easy to operate / self-assembly possible Length: 2500 mm, width: 1790 mm, height: 1500 mm Frame height: 960 mm ± 25 mm Machine weight: 1000 kg Kodpfozzdmzox Abvjnc Connection data: 400V / 4.0 kW / 5 bar

Condition: ready for operation (used), functionality: fully functional, The Wolfking TSMIG 850 grinder-mixer is a versatile machine designed to meet the needs of the meat processing industry. Thanks to its dual grinding and mixing function, it ensures homogeneous and consistent processing, even at low temperatures. Indeed, this grinder is equipped with robust paddles that ensure optimal distribution of the ingredients, resulting in a perfect texture for each production batch. Furthermore, this machine is ideal for companies looking to maximize their output and improve the efficiency of their production line. With its robustness and ease of maintenance, the grinder-mixer easily integrates into demanding industrial environments while ensuring high long-term reliability. In summary, the Wolfking TSMIG 850 is an essential choice for professionals seeking to optimize their meat production processes, while ensuring better management of raw materials and increased productivity. Kedszqdw Sepfx Abvenc Specifications: TSMIG 850/225 Mixer Paddle mixer Weight: 1800 kg Power: 41 kW Amperage: 71 A Voltage: 3*400 V Frequency: 50 Hz Dimensions (L x W x H): 1900 x 1900 x 2650 mm IP.65 5XWFPSKX

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Stackable up to 3 chambers Ksdpfx Abezx Dztovsnc General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Knsdpfx Ajzzavfebvoc Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, "304 Cr N􀇕" quality􀇕types produced. It 􀇕s produced from 100 Liters to 1000 Liters. It 􀇕s used to homogenzer liquid products ALSO WE CAN PRODUCE WHICH TYPE AND LITER YOU WANT Ksdpfx Abjzg Eb Rovonc

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material mixer from a pellet production line. Thanks to the mixer, the raw material fed into the pelletizers is homogeneous. Capacity of the line in which the mixer was used: approximately 8 tons/hour. Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Kodowxatbopfx Abvenc Rib diameter: approximately 1400 mm, 22 kW motor, Mixer price: 23,000 Euros, We offer a bag filter for the mixer, visible in the photos of the production line. Filter price: 7,000 Euros, The machine can be viewed in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 4018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Device type: Climate testing chamber / Temperature testing chamber Testing chamber volume: approx. 190 liters Testing chamber dimensions: approx. 580 x 450 x 750 mm (W x D x H) Housing dimensions: approx. 870 x 1550 x 1800 mm (W x D x H) Weight: approx. 470 kg Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation (climate operation): approx. 400 W Refrigerant: R404A Refrigerant quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Testing chamber lighting: Halogen, 2 x 24 V / 50 W Feedthroughs available Operation via touch panel / controller Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Testing chamber lighting Side feedthroughs Knjdpfx Abjztu Nqjvec Shelves / Testing chamber equipment as shown in the pictures Documentation / Operating manual Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötsch VC³ 4018 Climate testing chamber Documentation / Operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful check The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate testing chamber / Temperature testing chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from Vötschtechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Kodpfxozrwyio Abvjnc Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Lateral cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Applications Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Visual condition as shown in the pictures Scope of delivery 1x Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from the manufacturer Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Knsdpfxjzrtz Ae Abvsc Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Side cable entry Several shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Knjdpfx Abozhm Ihjvoc Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization Knedpozbt Szjfx Abvjc -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Knedpsim Ik Sofx Abvec Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Knedpfxoz Akcfs Abvoc Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), KARL SCHNELL 740 HORIZONTAL MIXER – STAINLESS STEEL KARL SCHNELL 740 industrial horizontal mixer, designed for mixing, homogenizing, and preparing food products in industrial facilities processing meat, prepared foods, and pet food. The equipment incorporates a large-capacity horizontal tank with a mechanical agitation system, which allows for uniform distribution of ingredients and the creation of homogeneous mixtures of solid, pasty, or semi-solid products. Its stainless steel construction, robust industrial design, and bottom discharge system facilitate integration into production lines that require controlled and repetitive mixing processes. MAIN FEATURES - Manufacturer: KARL SCHNELL - Model: 740 - Type: Industrial horizontal mixer - Application: Food mixing and homogenization - Stainless steel horizontal tank - Internal mechanical agitation system - Mixing of solid and pasty ingredients - Motorized drive - Mechanical transmission system - Top product feed - Bottom discharge system - Discharge valves and connections - Visible pneumatic drives - Protective side panels - Robust industrial structure - Access for inspection and maintenance - Integrable into complete food processing lines OPERATING PROCESS The ingredients are introduced into the horizontal tank of the KARL SCHNELL 740 using the top feed system. During the process, the internal mixing elements perform a mechanical movement that allows the ingredients to be distributed, different components to be incorporated, and the product to be homogenized. The mixing time and conditions are adjusted according to the characteristics of the raw material and the required formulation. Once the cycle is complete, the product is discharged through the bottom discharge system to continue to the next production operations. It can be integrated with industrial grinders, emulsifiers, product pumps, cooking systems, feed tanks, fillers, and packaging lines. APPLICATIONS Especially suitable for meat industries, wet pet food manufacturers, and prepared food producers. Depending on the installed configuration, it can be used for: - Ground meat mixtures - Meat preparations - Products for sausages Knjdoz R Tmpopfx Abvoc - Wet food for dogs and cats - Mixtures of meat and by-products for pet food - Pâtés and food pastes - Preparations with proteins and fats - Semi-solid and pasty products - Other compatible food formulations The KARL SCHNELL 740 provides an industrial solution for the preparation and homogenization of food mixtures, facilitating the uniform incorporation of ingredients before subsequent processing operations. The useful capacity of the tank, installed power, agitation speed, and internal configuration should be confirmed through the equipment's technical documentation. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Knsdpozznx Iofx Abvec Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.