Used Hot Press For Veneer for sale (37,893)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1500x2000 mm Weight 6500 kg Dksdpfjv A Hl Tjx Adasw Total power requirement 22,5 kw

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm - 2.75 x 1.60 m Dkjdpfxov Hhudj Adasw - with 3 heating plates 2 levels incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, without warranty or guarantee

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 800 kN Setting range 10 – 100 % Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 265 bar Dksdpfefhqhdex Adasw Daylight height 400 mm Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9555, working width: 1,300 mm, product height (max.): 40 mm, product height (min.): 8 mm, product length (max.): 3,000 mm, product length (min.): 400 mm, product width (max.): 1,300 mm, product width (min.): 200 mm, working height: 940 mm, TECHNICAL DETAILS Machine model: BÜRKLE thermal laminating line FFAII 1300 Machine no.: 9555 Application: Single and double-sided continuous laminating of foils and decorative papers on MDF and chipboard using urea adhesive. Working range Working width max.: 1,300 mm Dkodpfx Adou R R S Djaew Panel dimensions Width: 200 - 1,300 mm Length: 400 - 3,000 mm Thickness: 8 - 40 mm, ±0.2 mm Film dimensions Max. width: 1,320 mm, lateral protrusion up to 20 mm Max. roll diameter: 500 mm Sleeve diameter: 76 mm or 152 mm (3" or 6") Overall height Working height above floor: 940 mm Output System speed: 15 - 45 m/min Rotary drum drive: with Vector-Control EQUIPMENT Brushing machine DBM (warp brushes) Preheating and smoothing calender GKL, diameter 500 mm Thermal oil heater 36 kW Hardener application machine DAH, complete hardening mula system with monitoring Transport section with IR zones and temperature sensors DAK adhesive application machine with automatic level sensing Cooling unit for DOW cooling Glue feed TKE cone transport section Laminating calender EKM, diameter 500 mm with film unwinding stations and automatic splicing system FVE, vacuum bars, symmetrical clamping shafts, safety folding cheeks with pneumatic brakes, separating station STR with film clamping roller, TRB belt transport section with operating bridge for FVE expansion shafts Smoothing calender GKL, diameter 500 mm arranged at the outlet of the conveyor belt Thermal oil heater 96 kW Central switchgear with separate control panel on the laminating calender

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Dodpfxow U Nvpj Adaokw Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: good (used), functionality: fully functional, heating capacity: 14 kW (19.03 HP), Machine types: U 60 Machine no: 78/3103137 Power: 3/380V/50Hz Total power 14 Kw Press area: 2200X1250X400mm Dkjdpewb Skkefx Adajw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3980x1500x2000 mm Weight 6000 kg Dkedpfx Adov A Hl Heaew Total power requirement 22,5 kw

Condition: used, with new Mylar film used, in good condition Brand: Joos Dkedpfeww Nd Hjx Adaew Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: as good as new (ex-display), - pressing force: 700 kN - pressing surface: 2500 x 1250 mm - medium heated (water) with heating unit max. temperature 85 °C - incl. Joos-A.B.S.-Safety-System to protect the heating platens in case of incorrect loading or forgotten parts Djdpowaznofx Adaokw

Condition: excellent (used), Orma shelf press 2500x1300mm Shelf length 2500mm Shelf width 1300mm Maximum loading height 400mm Dkjdpfjw Az Eyox Adasw Press with 4 hydraulic cylinders Cylinder diameter 75mm Maximum operating pressure 300 bar Shelves heated with water from the central heating system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine Dsdpfswdn S Aex Adaskw • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm.,

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. Dsdpfxev Sthgo Adajkw The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4300x1650x2520 mm Dkjdpfx Adsv A Hlyoaow Weight 7900 kg Total power requirement 108 kw

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty Dodpfx Aswrtlqedajkw

Condition: ready for operation (used), Shelf length 250 cm Shelf width 110 cm Clearance 40 cm Motor 1.1 kW 4 hydraulic cylinders Dkodpfx Adswx H Hboaew

Condition: ready for operation (used), Year of construction: 2025, Main Drive Pressing force 1200 kN Additional Equipment Mylar Foil Attached to Upper and Lower Press Plates Electronic Flatness Control (EFC) for Incorrect Loading Protection This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Dkodpfx Adewvm Rbjaow Application Types Pressing / Laminating

Condition: used, Veneer press OTT Dsdpfxevdayme Adaskw Type JU 60S Pressing area max. 225x120 cm Electric

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic pistons Piston diameter: 70 mm Safety switch – emergency pull cord Electric oil heater Weight: 3300 kg New aluminium shelf coverings Dkedpsw Nqnvefx Adasw Year of manufacture: 2013

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2250 mm Dsdpfsv A Hltsx Adajkw Weight 7900 kg Total power requirement 54 kw

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Dkodpfxet Eq E Ss Adajw Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: excellent (used), functionality: fully functional, HOT PRESS model ITALPRESSE SCF 6 with hot platens second hand machine for wood, veneer, composite materials, furniture, panels etc plates useful size mm. 3000 x 1300 n.06 pistons diam.mm. 70 max. thrust Ton. 90 opening mm. 400 hot water plates heating with wood fired boiler Dkedpfxjq Slt Io Adajw weight kgs. 5000 volt. 380/50

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2150 mm Weight 7500 kg Total power requirement 54 kw Dkodpfov A Hlgox Adaew

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x1620x2130 mm Dkjdpfxsv A Hlae Adajw Weight 5760 kg Total power requirement 32,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1500x2000 mm Weight 5500 kg Total power requirement 22,5 kw Dodpfx Ajv A Hk Asdaokw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x1650x2150 mm Weight 6500 kg Dksdpfev A Hi Ssx Adajw Total power requirement 52 kw