Used Log Bandsaw Mill for sale (11,986)

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Nedezua N Sjpfx Abuolh Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Nsdpfx Absyalc Asuslh Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Further milling machines from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system About the machine: Nljdpfx Abjyxc Unsush A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Nledpfx Aoy Sihzobush Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Year of construction: 2014, condition: like new (used), Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Nledpfx Abei A I Rxeujh Travel : 320x250x300mm Speeds : 40-2240 U/min Taper : SK 40 Table 600x210mm Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2240U/min Feeds 12-630mm/min Power supply 50 Hz 3x 380V Motor 12,2KW Weight ca. 1000kg Dimension 1200x1900x1000mm

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Nsdpfx Ajtdfbmebuolh Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Nodpozy Uh Tjfx Abuelh Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Nljdpfx Abez Svb Deujh Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW

Condition: used, mileage: 444,700 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, empty load weight: 14,650 kg, maximum load weight: 11,350 kg, overall weight: 26,000 kg, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel consumption (urban): 1,035 l/100km, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 10,350 mm, lifting height: 4,000 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, onboard computer, parking heater, trailer coupling, Color: green, unladen weight: 14,650 kg, permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 315/80 R22.5, seats: velour, interior color: gray, air suspension, digital tachograph, automatic climate control, comfort driver’s seat, driver’s seat with air suspension, radio, power steering, adjustable steering column, alloy wheels, electric windows, outside temperature display, fog lights, electric exterior mirrors, curb mirrors, wide-angle mirrors, central locking, underrun protection, sun visor, cooler box, light bar with lights, hill start assist, LED daytime running lights, 1x15-pin connection socket, cup holder, rubber floor covering, insulated cab, information and service system, speed limiter, wide tires, trailer brake connection (pneumatic), lower bunk, sprung cab, Palfinger Epsilon M10L80 trailer: Janzen System DA RH18 short timber... UVH260396 225, non-binding offer, subject to errors and prior sale. Image may not match the offer. Due to the large number of inquiries, this advertisement only refers to the truck; the trailer is advertised separately and costs 18,000.00. Nlodpj Aarnbsfx Abush

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 Nodpfx Ae Aduhlebujlh WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL RANGES Travel in X-axis: approx. 300 mm Travel in Y-axis: approx. 300 mm Travel in Z-axis: approx. 300 mm MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP1 Machine dimensions length: 1,000 mm Machine dimensions width: 800 mm Machine dimensions height: 1,500 mm Machine weight: 700 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Maho Model: MH600E Control: Philips CNC 3460 Nedpe Ad Aidefx Abuelh SPINDLE Spindle speed: 80–4,000 rpm Tool holder: SK 40 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,000 mm Height: 2,000 mm Weight: 1,000 kg

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Bandsaw Design: Sturdy cast iron construction Machine Weight: approx. 1.5 t Working Area Roll Diameter: 500 mm Overhang: 1,050 mm Workpiece Height: 400 mm Work Table Table Size: 750 × 800 mm Table Tilt: ±40° Nlodpfxs Aaz Spj Abush Cutting Speed Cutting Speed Stage 1: 15–79 m/min Cutting Speed Stage 2: 67–305 m/min Cutting Speed Stage 3: 207–940 m/min Cutting Speed Stage 4: 2,350 m/min Drive Variator Drive: infinitely adjustable Gear Stages: 4 Electrical Data Operating Voltage: 400 V Total Power Requirement: 5.5 kW Dimensions Space Required: approx. 2.4 × 1.0 × 2.2 m EQUIPMENT Band Tensioning Device Tiltable Work Table Rear Auxiliary Table Various Saw Band Guides Saw Band Grinding Device Work Light Foot Switch Accessories

Condition: excellent (used), Year of construction: 2014, Takisawa NEX - 908 – 6-axis machine Year of manufacture: 2014 Control system: - Fanuc Series 32i - Model B Tool turret: - 12 stations, all stations driven (powered tools) Main spindle: - Spindle bore 52 mm. Axes: - X, - Z, - C, - Y, - A, - B Accessories: - Various driven tools, axial/radial - Various collets - 1 collet chuck - Parts collection system - Chip conveyor - Coolant system Availability: - Immediate Special features: - The machine will be sold complete with all accessories (full equipment package). Nledpfe Adrf Usx Abujh - The machine can be inspected and tested under power.

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout Nedpjzwn Egjfx Abuelh - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Nljdpfxezyx E As Abuoh Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: used, This top-loading CNC milling machine, model: FP5A, is being auctioned off online as part of our industrial auction / machine auction, following the closure of the J&S GmbH Automotive Technology - BGA - warehouse and storage facility, including shelving and materials. Nedj Aa Tgfspfx Abuelh You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 1998, Available immediately from our location: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel ranges X/Y/Z 1100/300/520 mm SK 50 Spindle speeds 31.5 - 1400 rpm Drive power 7.5 kW Digital display Nlodpfe Aa Iizsx Abujh Hydraulic vise Weight 2.7 tons Many tools and milling cutters included Price: Euro 2,750.00 + VAT, ex works

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Nledpfx Aj Aa Il Aebuoh Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex-works: Tool milling machine MAHO Type MH 500 M Year of manufacture 1989 Heidenhain digital display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill travel 50 mm Travel distances X/Y/Z 500/380/350 mm Drive 3 kW Nledpfx Aj Aa Il Njbueh Feeds 10 – 1000 mm/min Coolant system Weight 1600 kg Accessories: Hydraulic vice Price: Euro 2,500.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Nljdpfxo Aa Imys Abuoh Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-works: Union table drilling machine Type BFT 90 / 2 Year of manufacture 1975 / Overhauled and fitted with digital displays in 2022 Spindle 90 mm Mounting SK 40 with adapter MK 4 Table 1120 x 1000 mm Table load 2500 kg Njds Aa Indepfx Abuolh Distance spindle – stop 2400 mm Travel distances X/Y Z 1000 / 1250 / 1000 mm Spindle speeds 8 - 1600 rpm 2 digital displays Stop Spindle travel 710 mm Weight 9 tons For the price of Euro 8,500.—plus VAT ex-works.

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Nsdpfx Abozd Tg Ajuelh Location: Nattheim.

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm Nedpfxsyxr Hmo Abuslh table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: used, BÄUERLE SFM spindle moulder - used - Planed cast iron table, Nlodpfowmctyox Abush Finely adjustable milling stop, Right/left rotation ----- Technical specifications ----- Table size: 1100 x 920 mm, Work table height: 830 mm, Spindle diameter: 30 mm, Speeds: 2,800, 4,500, 5,600, 6,000, 9,000, and 12,000 rpm.

Condition: used, machine/vehicle number: 37247, equipped with a 3-axis digital display, manufactured by HEIDENHAIN, with a coolant system, machine light, and angled milling head with counter holder. Nodpez Nhn Rsfx Abuolh