Used Paint Dry Dare for sale (6,500)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. Guedpfx Aswzl Hxekhji • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, workpiece weight (max.): 750 kg, working width: 380 mm, working height: 950 mm, input voltage: 400 V, power: 2.5 kW (3.40 HP), IPM380 Industrial Brushing Machine – For Planing Mills and Large Timber Construction Wherever even more performance or convenience is required, the hybrid brushing machine IPM380 steps in. This machine delivers results that are hard to match: 8 axes, infinitely adjustable, paired with 4 different brush types that can be finely tuned for outstanding finish quality. Your advantages at a glance: Fast: 20–120 m/min feed speed Minimal downtime: 5 minutes setup // 20–45 minutes full cleaning Solid PP material: Almost nothing sticks – easy to clean Hybrid design: Can be converted into a profile spray machine using a quick-swap insert Durable: Made in Denmark, electronics from Germany Godsw Av T Eopfx Akhjui Expandable: With matching drying technology, automation, and sanding units – we supply complete finishing lines Expert support: We know what we’re doing – and we’re here to advise and assist so that you’re 100% satisfied And for those who need more: We also build this model series in larger formats: 640 mm height × 380 mm width 1,300 mm height × 900 mm width What configuration do you need? You’ll find more details on the Bruhn Lackieranlagen website as well as in the attached video. And of course, we’re personally available to assist you. Simply get in touch to receive a solution tailored specifically to your needs. We look forward to impressing you!

Condition: used, Year of construction: 1986, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Engine : hydraulic Reactor volume: 280 L Shell circuit : Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Working pressure (half shell): 6 bar steam Gedex Rz Iqjpfx Akhjui Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: - 20°C + 160°C Welding coefficient : 0,7

Condition: used, maximum load weight: 13,190 kg, overall weight: 16,000 kg, first registration: 12/2020, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 46 m³, Year of construction: 2020, Krone WK 7.3 WK7.3ST Steel Swap Body Box VIN: W0957476 Body: * Steel box body with perforated walls * EN12642 Code XL certification * Dimensions (LxWxH): 7.30m x 2.48m x 2.52m * Volume: 46 m³ Weights: * Gross weight: 16,000 kg * Payload: 13,190 kg * Unladen weight: 2,810 kg Other information: * German vehicle * Excellent condition New general inspections, safety checks, or weight downgrades/upgrades can be arranged upon request. We are happy to assist with the procurement of export/temporary registration plates and with transporting your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors. ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 sqm premises you will find a large selection of vehicles. Our company philosophy is characterized by fairness and professionalism. As customer satisfaction is very important to us, we offer our customers an all-inclusive service package and provide a dedicated contact person to support them throughout the purchasing or selling process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transport services. Short-term/export registration plates We are happy to assist you with obtaining export or short-term license plates. Gujdpsyg Tcdefx Akhsi Completion of customs formalities We are happy to help you with customs clearance procedures.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Guedpfxowcznbo Akhsi Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Condition: used, Drying oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 23101297680 unused 2023 price: €27,842 Godpjx Tg Rcsfx Akhsui 22081297330 used 2022 price: €14,182

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Gujdpfx Ajw I Uygskhsi Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Availability: short-term Location: Hochheim

Condition: good (used), Year of construction: 2020, operating hours: 340 h, Technical specifications: • Year of manufacture: 08/2020 • Operating hours: 340 • Dry ice capacity: 18.2 kg • Feed rate: 0–2 kg/min • Dimensions: 91.4 × 50.8 × 101.6 cm • Weight: approx. 117 kg • Air consumption: 1.4–4.7 m³/min at 5.5 bar • Blasting pressure range: 1.4–17.2 bar Gsdpfx Akoywawwjhsui Includes hose package, gun, and round nozzle. Net price plus 19% VAT.

Condition: ready for operation (used), Stork dry breader No nameplate Belt width: 63 cm Gjdpfxsykkkge Akhsui Dimensions: 300x130x180 cm

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 Guodjyffqqspfx Akhoi The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: new, overall weight: 249 kg, input voltage: 400 V, We offer a brand new, unused Güntner dry cooler, complete with an independent temperature control system featuring fan speed regulation. This unit is typically used to dissipate heat from a process or system into the surrounding air without using water. It is suitable for applications where a closed water/glycol circuit needs to be cooled. Gsdpezl H Dwsfx Akhjui

Condition: used, Dry board sorting line Gedpfsxyixaox Akhoui ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Electric cabinets renovated 2022

Condition: used, IL 2 control unit for ILSA Multimatic. Gedpfx Akey Uv Uaohoui

Condition: good (used), We offer guns , cabins , complete plants , used and reconditioned Gedpfx Aeri R Rljkheui

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Gusdpfx Akexl Eltjhsi

Condition: as good as new (ex-display), Year of construction: 2014, overall weight: 98 kg, total height: 4,950 mm, total width: 5,100 mm, total length: 7,300 mm, Vacuum dryer VS-50 C Gedpfoqmm Npjx Akheui Internal dimensions (LxHxW) in mm: 405x340x370 Wattage: 230 V 50/60 Hz. 1.52 KW Additional shelf 1 pc. The machine is from 2014, but has never been used. Suitable for drying processes at temperatures up to 200°C with connection for a vacuum pump. The vacuum pump is not included. Further technical data can be found in the technical data sheet. A total of 3 shelves are available.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Godpfx Akjzinzlshsui Good condition

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix spray gun PerformAA 50 - Chassis mounting - Incl. spray gun air-material hose, material filter - Permissible material operating pressure: 207 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Sales notes: Sales exclusively to business customers. No sales to private customers. Sales and delivery exclusively within the EU – no sales to third countries. Delivery conditions and shipping costs based on individual effort and agreement. The sale is made with the exclusion of any warranty. Gjdpozv S T Eofx Akhsui Are you looking for other machines or similar products? Please do not hesitate to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical product range available. We will gladly check if we can offer you a suitable alternative.

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1-Mercury Pump: - Wall-mounted - Includes suction hose, material filter - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Mercury pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to third countries. Gedpfxszwb Nrs Akhjui Delivery conditions and shipping costs will be determined individually based on effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please feel free to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical range available. We will be happy to check if we can offer you a suitable alternative.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS Gedozq Axzopfx Akhjui The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, Mobile Paint Drying Racks – Double-Sided, 6 / 12 Levels Heavy-duty mobile drying racks for storing and transporting freshly painted, lacquered, or coated workpieces during the drying and finishing process. The racks feature a robust, welded steel frame with support arms on both sides. Individual levels allow painted parts to be stored separately, preventing contact between the workpieces. Mounted on casters for easy movement between painting, drying, and production areas. Suitable for furniture and woodworking production, paint shops, metalworking, printing, and other industrial coating applications. Two versions are available: 12-level version Quantity available: 12 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 12 support levels Double-sided construction Mobile on casters Price: €450 excl. VAT / pc. Ref.: 47444-132 6-level version Quantity available: 2 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 6 support levels Double-sided construction Mobile on casters Price: €390 excl. VAT / pc. Ref.: 47444-132/1 Total quantity available: 14 pcs. Godez I Tynspfx Akhjui Used industrial equipment in good working condition with normal signs of use. Available individually or in larger quantities. Located in Gatciems, Latvia. Inspection is possible by appointment. Loading assistance is available. Delivery within Europe can be arranged upon request.

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking Godpoz Nd I Tefx Akhsui

Year of construction: 2026, condition: new, functionality: fully functional, drying rack for painted parts double-sided shelf length 690 mm Gjdoz Rm Edspfx Akhjui maximum spacing 2600 mm rods covered with rubber mobile design height 178 cm new, unused

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: Gedpfxezc Hvpj Akheui General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. Guedpfx Akoz Daukehji During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.