Used Sterilizer for sale (223)

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel Bsdez E Rv Ujpfx Aiwsww

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: Like New / Unused Technical Data Product Type: ELUTION / Solution Tank Volume: 3,200 liters Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20°C to +150°C Pressure vessel according to PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at pressure fluctuation ranges of 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate No.: Z-EU-SI-LJU-20-08-2350154-14124056 • Inspection report available • Pressure test with water successfully completed • Approval by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual acceptance • Turn-Over Package (TOP) fully available Complete Documentation Available The complete technical documentation package is available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Nameplate documentation • Assembly drawings • Detailed drawings • Welder lists and weld process qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gases • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check Bwsdpfsykkbxox Aiwew • Roughness protocol • Surface treatment report • Operating and maintenance manuals (equipment and components) The documentation scope meets project standards for pharmaceutical plants. Design Features • Double jacket for heating and cooling • Manufactured entirely from stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes / inspection openings • Clamp and flange connections • Instrumentation pre-installed (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media Special Feature This is not a standard tank, but a high-quality BRINOX project-built vessel in genuine pharmaceutical quality featuring: • PED Module G individual inspection • TÜV SÜD approval • FAT performed • Complete welding, material, and inspection documentation • Documented surface treatment • 316L construction for sterile applications Project quality for demanding GMP applications – immediately available.

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). Bwjdpfxexv Dv Eo Aiwsw - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Elution / Solution Vessel Volume: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Operating pressure: -1 / +3 bar Test pressure: As per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: As per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Single unit inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel was tested as part of a documented FAT. The tests included, among others: • Verification of welding documentation • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness inspection • Sensor calibration check • Layout and dimensional inspection • Documentation review The complete FAT report including test protocols is available. SPECIFICATION • Double jacket for heating/cooling • Entirely made of stainless steel 316L • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation ready (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project overrun • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available DOCUMENTATION – complete and structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy check • Internal pressure test • Calibration certificates • Assembly records Bwodpfx Asykkhroiwew • Drawings (detail and overall) • Operating and maintenance manuals Complete documentation file available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project build in true pharmaceutical quality with verified pressure design, full PED conformity (Module G), documented FAT testing, and comprehensive quality documentation. Project-level quality for sterile applications – available immediately.

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Bwjdpoygmcdofx Aiwsw

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Bwjdpfxoq I Sgys Aiwow

Condition: used, Packo PHP 2 Pharma Process Pump The Packo EHEDG and 3A-certified pharma process pumps of the PHP2 series are used for the most demanding sterile applications in the pharmaceutical, biotechnology, and semiconductor industries. These perfectly cleanable pumps feature pump housings made of thick, cold-rolled stainless steel 316L, which are 100% pore-free and extremely smooth. The pumps have fully machined, open impellers made of material 1.4435. Thanks to their gap-free design and final electropolishing, the PHP2 series pumps are perfectly cleanable and therefore a reliable component in your production process. Application areas: These perfectly cleanable process pumps are the ideal solution for purified water circuits, cleaning applications, etc. Typical fluids are purified water, WFI, CIP, syrups, etc. Your advantages: High pump efficiency leads to lower energy consumption Low NPSH values: reduced risk of cavitation Electropolished: perfectly cleanable Simple design and maintenance: less downtime Standard components Fully certified (roughness value, FDA, USP, 3.1 for parts in contact with media, certificate of conformity, etc.) Suitable for SIP Robust design according to ASME BPE guidelines Parts in contact with media < 0.4 µm Manufacturer: Packo Type: PHP 2/40-1857752 Bwodpsw Hc Hmefx Aiwew Q: 14 m³/h H: 59 m Weight: 91 kg You can find more items – new and used – in our shop! International shipping costs on request!

Condition: like new (used), BARRIQUAND STERIFLOW Laboratory Rotary Autoclave – 1 Cage BARRIQUAND STERIFLOW laboratory rotary autoclave with a capacity for 1 cage, designed for the development, testing, and validation of sterilization and pasteurization processes for packaged food products. Its single-cage configuration and rotary system make it particularly interesting for pilot plants, R&D departments, technology centers, and manufacturers who need to conduct thermal treatment tests on a smaller scale before transferring the parameters to larger-capacity industrial equipment. The system allows for controlled rotation of the load during the thermal cycle, which can promote heat transfer and homogeneity of the treatment in certain products and formats. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Laboratory/pilot rotary autoclave -Capacity: 1 cage -Load rotation system -Application: Sterilization/pasteurization -Batch thermal processing -Horizontal chamber -Stainless steel construction -Large-diameter front door -Safety locking system -Motorized rotation drive -Internal process distribution system -Process pipes and valves -Designed for testing and development of thermal processes Bwedpfxozbi U Es Aiwew -Suitable for pilot plants and small-batch production PROCESS The BARRIQUAND STERIFLOW 1-cage model allows for the reproduction, on a reduced scale, of industrial processes for the thermal treatment of packaged foods. The products are introduced into the chamber and subjected to the programmed cycle of heating, thermal holding, and cooling. During the process, rotation can be applied to the load, allowing evaluation of its influence on thermal transfer and product behavior. This configuration is particularly useful for conducting product testing, recipe development, cycle optimization, process validations, and trials with new packaging formats. APPLICATIONS Especially suitable for R&D departments, laboratories, pilot plants, technology centers, and food industries that need to develop or validate processes before their implementation on an industrial scale. Depending on its configuration, it can be used for trials with cans, jars, and other packaging compatible with thermal treatment and autoclave rotation. Its combination of BARRIQUAND STERIFLOW technology, rotary system, and 1-cage capacity offers a flexible solution for research, development, and pilot production. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2015, condition: ready for operation (used), A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible. Bwodjyuyvyepfx Aiwew

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Supports – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: Like new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 liters Total volume: 33,213 liters Product contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT carried out including: • Dimensional, visual, and identification inspection • Weld seam testing and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality inspection FAT successfully completed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Interior surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety, and process connections Mechanical configuration: • Original BRINOX stainless steel saddle supports included • Heavy-duty design • Lifting points for crane handling present CONDITION • Absolutely as new • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also as new and included in delivery. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED certificates • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Part drawings and parts lists Bedpfxeykngfs Aiwjww • Operation and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new-build project with complete FAT, PED compliance, and GMP documentation. Large-capacity BRINOX 30,000 L pharma process vessel in as-new installation quality, incl. saddle supports – immediately available.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, We have two units in stock. Price is for one unit only. Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability. Integral 140°C high-temperature sterilization function, 14 hr duration. Optimized airflow system will not interfere with samples or incubator function. In-chamber HEPA air filtration continuously removes particulates for Class 100 quality conditions. On-demand 140°C sterilization cycle eliminates contamination from internal surfaces. Audible alarm activates if outer door is opened during the cycle or if temperature reaches 60°C or greater. Access code prevents accidental initiation of the cycle. Alphanumeric messaging center clearly displays temperature, CO2 and RH. Audible/visual alarms with silence button. Setpoints for temperature, overtemperature, CO2 and RH. Configurable audible ON/OFF, access code, HEPA filter change reminder, remote alarm contacts, tracking low temp and high and low CO2 and RH alarms. Temperature Range: Ambient +5°C to 50°C Bods Aaw Rbopfx Aiwjww Relative Humidity: 95%, controllable Humidity Source: External humidity reservoir CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: IR Sensor Capacity: 322.8 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 523 x 732 x 838 mm Dimensions (DxWxH): 686 x 1092 x 1002 mm Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. Bedoy Rk Igjpfx Aiweww The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Height: 1500 mm Bedpfevcqlwsx Aiwoww Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Year of construction: 2005, Compact roll production line WP Rollprofi Year of manufacture: 2005 Condition: refurbished, cleaned & inspected Suitable for the production of sliced rolls, plain round rolls, long-rolled rolls, and double rolls Bwsdpjz A Sd Uefx Aiwow Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounding machine, Multimatic Pre-fermentation time: 12 min (6 min before the long-rolling station and 6 min between the long roller and the cutting station) Proofing drying Maintenance-free proofing chain with automatic tensioning Variable depositing device for proofing trays of the 3 Euro sizes: 400x600 / 580x780 / 580x980 mm Sterilization station Siemens touch screen control Dimensions (LxWxH): 3000x1250x2550 mm

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Bwsdpfx Aieykqmzowjw Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES Bjdozw A Shjpfx Aiwjww -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Product preparation equipment Dosers Can sealing machines Inspection systems Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Bodpfoz Snfcex Aiweww Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: M329, Used ELOPAK sks-s60S shikoku monoblockTechnical Specifications & Performance DataThis aseptic carton filling monoblock is engineered for high hygiene beverage packaging within a used bottling line or second hand industrial packaging environment. Manufactured by Shikoku Kakoki, it is built for reliability and precise dosing in beverage production applications where asepsis and product integrity are critical.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear: 2007Operating hours: 3339Operating mode: AsepticSupported formats: Compatible with 0.5L, 0.75L, 1.0L carton packagesContainer type: Designed for Carton handlingMachine weight: 6000 kgElectrical: 400 V, 50 Hz, 3-phaseCompressed air: Min. 550 kPa, Max. 930 kPa, Consumption approx. 2,460 NL/minAdvanced Automation & Control SystemsThe monoblock integrates precise filling control for aseptic operations, ensuring accurate volumes across multiple carton sizes. It is designed for automated production with centralized controls and operator-friendly interfaces. Safety interlocks and guards protect operators while maintaining rapid access for adjustments and cleaning. Quick format adjustment supports efficient changeovers between 0.5L, 0.75L and 1.0L.Centralized control with clear status indicationAutomated aseptic cycle managementSafety guarding with interlocked access pointsRapid changeover design for multi-format productionProduction Line Integration CapabilitiesDesigned to integrate seamlessly within industrial packaging and beverage production lines, this aseptic filling monoblock interfaces with upstream carton forming/sterilization modules and downstream closure application, coding, and case packing. It can operate as a standalone station or as part of a complete packaging line.Inline or standalone operationFlexible interface to conveyors and downstream packaging machineryMulti-format capability: 0.5L, 0.75L, 1.0LSuitable for integration in used bottling line and second hand bottling equipment layoutsMachine Condition & Maintenance HistoryThe machine shows low operating hours for its class, indicating limited wear. It is presented in working condition suitable for recommissioning into beverage production. Preventive maintenance-friendly design minimizes downtime and supports predictable operation in second hand packaging machinery environments.Low hours: 3339Well-preserved aseptic filling hardwareReady for operation subject to standard line integration checksOperational Performance & VersatilityPurpose-built for aseptic packaging, the unit maintains sterile conditions throughout the filling cycle. Its format range supports popular retail carton sizes, enabling versatile product portfolios without complex changeovers. The precise filling system ensures consistent fill accuracy and package quality.Aseptic process integri... Bwodey Epktepfx Aiwjw

Condition: used, Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The device is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and Function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a single unit, with all its components housed in a closed casing. The casing features removable, epoxy-coated sheet metal covers. All external connections, as well as the ON/OFF switch, are located on the rear of the device. All components that can be serviced and replaced by the user are accessible via the front door. The trolley for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be attached to three sides of the device. Performance Features and Capacities The RPU-2100R is designed to optimize reagent management for laboratories with high throughput: Reagent concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per concentrate: With a 10L container, up to 8,250 complete blood counts per month can be performed without changing the reagent. With a 20L container, up to 16,500 complete blood counts per month are possible. Shelf life: The mixed reagent has a shelf life of 30 days after opening. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog number: NARP109010 External connections Power supply, Euro plug Ethernet/USB (only NARP109010) RJ45/USB-B RS-232 (only NARP109000) 9 Pin SUB D connector External connections (liquids) Water connection: G ¾" inch thread Reagent outlet connection (4x) Push-in hose connection, outer diameter 6 mm Waste connection (1x) Hose sleeve, hose inner diameter 12 mm Reagent concentrate Maximum size: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Reagent draw rate: 0.5 liters/minute, max. 6 minutes (with full supply and overflow container and new pre-filter) 1 liter/minute, max. 2 minutes Filtration Air filter, bacterial filter, pore size 0.2 µm Liquid pre-filter, particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter, bacterial filter (sterilized), pore size 0.2 µm, self-venting System dimensions Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Volume Water tank: 2.5 liters Supply tank: 2.5 liters Mixing tank: 0.6 liters Overflow tank: 0.6 liters Language selection available: de, en, es, fr, hu, it, nl, sk, sv (expandable) Bjdpfeyk U Dwjx Aiwjww Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: LC615, Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile environment. Its three-phase industrial electrical configuration ensures stable operation and straightforward integration with plant utilities. Format changeovers across 0.5L, 0.75L, and 1.0L cartons are engineered to be efficient, helping reduce downtime and improve overall equipment effectiveness in second hand or refurbished installations.Industrial-grade controls for consistent aseptic performanceProcess parameters optimized for sterile packaging operationsOperator-friendly interface for setup and monitoringInterlocked access points and safety circuits for protected operationProduction Line Integration CapabilitiesThis aseptic carton filler integrates seamlessly within a used bottling line or new packaging configuration. It is well-suited for pairing with upstream carton preparation or sterilization modules and downstream cap closing, date coding, case packing, and palletizing equipment. The machine supports inline or standalone operation depending on plant layout.Interfaces with conveyors and downstream packaging machineryFlexible line positioning for greenfield or retrofit projectsMulti-format capability for 0.5L, 0.75L, 1.0L cartonsMachine Condition & Maintenance HistoryWith only 3339 operating hours, this second hand aseptic filler presents low wear relative to typical lifecycle expectations for industrial packaging equipment. Its configuration and utilities align with common European plant standards, supporting rapid recommissioning by qualified technicians.Low operating hours indicating limited duty cycleWell-preserved aseptic configurationOperational Performance & VersatilityOptimized for aseptic beverage production, the machine is ideal for long-shelf-life products commonly packaged in gable-top cartons. Its multi-format capability enables agile product scheduling and SKU changes without extensive retooling.Aseptic filling for extended shelf lifeSupports standard gable... Bodpfxsyz R E Te Aiwjww

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL SPECIFICATIONS Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel compliant with PED 2014/68/EU Category IV Module G – Single Unit Inspection Notified body: TÜV SÜD Notification number: 0036 FAT – Factory Acceptance Test Full factory FAT conducted and documented. Testing includes pressure test, NDT (non-destructive testing), dimensional inspection, surface roughness inspection, and documentation release. FEATURES • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Interior electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and instrument connections • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified • As-new industrial condition Bjdpjykt T Rofx Aiweww • Immediately available DOCUMENTATION – complete and available Comprehensive structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT documentation • Material certificates • Welding lists and WPS/WPQR • NDT reports • Surface roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Calibration certificate (pressure gauge) • Component drawings • Assembly parts list • Operation and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gases Complete digital documentation file available. APPLICATIONS • Pharmaceutical industry • WFI / PW • GMP-compliant plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical version with PED Cat. IV Module G single unit inspection by TÜV SÜD, complete FAT, and full technical documentation. Immediately available.

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPH Technical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation. Line Volume Speed Equipment Description Bedpfozdipuox Aiwoww Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025 Manufacturer: SIG Model: HMR - 7478 Rated Speed: 26,500 BPH Fill Volumes: 65 ml, 125 ml, 200 ml Sterilization: H2O2 system (SIG COMBI 2024) System Compatibility: SIG-2 Combibloc 1224 filler platform Upgrades: Filler speed-up conversion kit (SIG-2 2025) Formats: Compatible with 0.065L, 0.125L, 0.2L package sizes Advanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production. Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts. Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents...

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: Like new / unused Empty weight: 866 kg TECHNICAL DATA Product type: Main filling vessel / process vessel Design: cylindrical with dished ends Working volume: 1,500 liters Total volume: 1,785 liters Product-contact material: 1.4435 Bwodpsykuhijfx Aiwow Jacket material: stainless steel (double jacket design) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel in accordance with PED 2014/68/EU Module: G Fluid group: 1 SURFACE & EXECUTION Internal surface: high-gloss polished, pharmaceutical design Product-contact areas made of 1.4435 Weld seams finely ground Pharmaceutical CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stock item • Interior absolutely like new • No corrosion • No signs of use • Immediately available DOCUMENTATION – complete • EU Declaration of Conformity • TÜV acceptance documents • PED Module G documentation • Material certificates 3.1 • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-volume BRINOX main filling vessel, 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical-grade surface finish, and pressure test at 5.4 bar. Project quality for sterile applications – immediately available.

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: Bodpfx Ajzbt Szeiweww -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 1998, functionality: fully functional, filling weight (min.): 250 g, filling weight (max.): 1,000 g, Equipment: documentation/manual, MIROMATIC MDA 2-1-C2 Format-independent bucket filling system General information: - Manufacturer: Miromatic - Type: MDA 2-1-C2 - Year of manufacture: 1998 - Condition: Used, good condition - Application area: Filling of thin to pasty food products into buckets and containers - Equipped with a Miromatic fruit mixing system (including pumps, valves, flow meters, etc.) Performance and container sizes - Filling range: 250 g - 1,000 g - Output: up to 1,800 kg/h - Dosing accuracy: ± 0.5 % - Format-independent transport system - Fast format change without special tools Equipment and functions: - Automatic bucket feed - Automatic lid feed - Product selection via stored programs - Quantity recording per container and product - Magneto-inductive flow meters with self-correction - Low-foam product filling - Hygienic stainless steel design (V2A) Hygiene equipment Bedpfx Ajzav A Hsiwsww - Integrated CIP cleaning system - Automatic cleaning of feed tank and conveyor chain - Steam sterilization of product feed and dosing valves - Laminar flow module with HEPA filtration (cleanroom class 1000) - UVC disinfection of containers - UVC disinfection of lids Application areas The system is particularly suitable for filling: - Yogurt - Sour cream - Fresh cheese - Quark - Desserts - Fine food products - Sauces and dressings - Creamy and pasty food products