Used Tempering Furnace for sale (1,152)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Bdedpfx Aofzccneaaea 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Bdsdpfxsfx Nfms Aaaea 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), functionality: fully functional, total height: 1,150 mm, total length: 2,300 mm, total width: 1,860 mm, All commercial workshop machines and equipment from the mechanical engineering shop are being sold as part of a liquidation: Band Saw FENDO 250 A €2,900.00 - Dimensions (LxWxH) 2300x1860x1150 mm Frame Saw AEG AG63K €1,500.00 - Dimensions (LxWxH) 1650x700x2000 mm Pipe Threading Machine Rems, 2 units. 1 unit defective, can be used for spare parts. Dimensions (LxWxH) 950x700x1250 mm. Both machines together €500.00. Lathe, 360 mm swing diameter at €2,900.00 - Dimensions (LxWxH) 5000x950x1620 mm. Small Hardening Furnace €900.00 - Dimensions (LxWxH) 900x650x1350 mm Notching Machine Comaca €1,900.00 - Dimensions (LxWxH) 1150x900x1350 mm Various exhibition stand elements, dimensions shown in the photo. Bsdpfxjyrdtdo Aaaoda Among others, a robust and precise VDF A208 lathe is for sale, ideal for workshops, metalworking, or training facilities. Technical Data (approx.): Lathe A208 Swing over bed: approx. 430 mm Centre height: approx. 210 mm Distance between centers: depending on version (e.g. 1000 / 1500 / 2000 mm) Leadscrew and feed shaft for thread cutting Sturdy cast iron machine frame Precise and reliable German quality machine The machine is heavily constructed, runs smoothly, and is ideal for precision turning work up to 360 mm. It has only been operated by the same person for the last 15 years. VDF machines are renowned for their durability and high manufacturing quality. Condition: used, fully functional. Viewing by appointment possible.

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Bdedjxp Rbhopfx Aaaea

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Bdodpfxjyfv N Re Aaasa

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Bodew Igvtepfx Aaasda

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Bdedpfx Aswkiipsaaea

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Bjdjvxvgrspfx Aaaoda

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Bdedpfx Aaoygw S Aeasa

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Bdodsxt Rmljpfx Aaaja

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Bedpow Emyzsfx Aaasda

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Bjdetxb Avspfx Aaaoda

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Bsdpotxb Apofx Aaaeda

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Bdodpfetndwuox Aaaea

Condition: new, Pit furnace, make VEI type: SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm Bdedpfx Aaeg R Snhsaja outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW Bjdpofbgz Iefx Aaaeda fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: new, El. heated chamber furnace, make VEI type: KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm Bdodpfxoipvgij Aaaea heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7 Bsdpfx Aod Sg Hhjaasda

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Bdodpjid Im Eefx Aaaja Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Bjdpfx Asydl Iaoaaoda Max. temperature: 750 °C Connected load: 84 kW Weight: 3.7 t

Year of construction: 1996, condition: ready for operation (used), Useful dimensions: 700 x 650 x 1,100 mm Bjdpfx Aeydlqhoaaeda Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Bdodpfoydll Sox Aaaea All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Bsdpfx Asydlllsaasda All technical data for the individual systems can be found in the attached pictures.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Bsdpfx Asd Nfq Isaasda Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Bdjdpfew Ec Egsx Aaasa Feature / Value Model: Nabertherm N 2260/S Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.