Used Testing for sale (9,864)

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range for basic slide: 16,5 – 90 mm Vertical stroke: 50 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Weight of measured gear, max.: 0,5 kg Chsdowkhmtspfx Afljf Measuring force adjustment, manually adjustable: 0 – 8 N Measuring accuracy: up to 1 μm Standard master gear arbor, diameter: 12,7 mm

Condition: excellent (used), Laboratory testing equipment Technical characteristics: 1) Perkin Elmer Clarus 69 gas chromatograph Name: Gas chromatograph Model: Clarus 69 Year of manufacture: n/a purchased 2021 Manufacturer: Perkin Elmer Country of manufacture: Singapore CE marking yes ID number: 690S19111503 Number of units worked n/a Technical data: • Power supply 220-240 V / 50-60Hz • Dimensions 83 x 67 x 82 cm • Weight 69 kg • Scanning speed variable in the range of up to 12500 amu/sec • Mass range 1.0 - 1200 (amu) • Power 3120 VA 2) Set for spectrophotometric determinations and titration Name: Set for spectrophotometric and titration determinations Model: - Year of production: n.d. purchased 2021 / 2020 Manufacturer: Methrom Country of production: Switzerland CE marking yes Identification number: - Number of units processed n.d. Technical data: • OMNIS Titrator in stirrer • OMNIS per. mod.w/o • OMNIS Main module SR • Dosino • Dosino • Conductivity Module 3) Density meter DMA 501 Anton Paar Name: Density meter Model: DMA 501 Year of manufacture: n.d purchased 2021 Manufacturer: Anton Paar Country of manufacture: Austria CE marking yes ID number: 83293429 Number of units worked n.d Technical data: • Power supply 220-240 V / 50-60Hz • Dimensions 38 x 27 x 18 cm • Weight 13.5 kg • Measuring range Density: 0 g/cm3 to 3 g/cm3; Pressure: 0 bar to 10 ba • Accuracy Density: 0.001 g/cm3 ; Temperature: 0.3°C 4) Spectrum Two NIR InGaAs Parameter Constancy Monitor Name: Spectrum Parameter Constancy Monitor Model: DMA 501 Year of production: n/a purchased 2021 Chjdpfx Asv H Ruyjflsf Manufacturer: Anton Paar Country of production: Austria CE marking yes ID number: 83293429 Number of units worked n/a Technical data: • Power supply 220-240 V/50-60Hz • Dimensions 30 x 21 x 45 cm • Weight 13 kg • Detector type LiTaO3 5) Viscometer Visco QC 100 -R Name Viscometer Model: DMA 501 Year of production: n/a purchased 2021 Manufacturer: Anton Paar Country manufacture: Austria CE marking yes Identification number: 83264979 Number of units worked n.d. Technical data: • Power supply 220-240 V/50-60Hz • Dimensions 38 x 59 x 36 cm • Viscosity range from 1.6 to 40 million • Max. spring torque 0.7187 [mNm] Equipment: • Hydrogen generator PG H2 250 Plus PerkinElmer no. VPHG-000225 • Oil-free compressor DK 50 2V50S/M EKOM no. S6595-12-2020 • Zero air generator N-GC 1500 PLUS PerkinElmer no. NGC170215614 • PerkinElmer TURBOMATRIX 40 Gas Chromatograph Attachment No. HS40S1912284 • Dell OptiPlex XE3 C1PZF73 Computer • Dell OptiPlex XE3 C1X8G73 Computer • Dell Vostro 3681 F5TSF73 Computer • Signal Wiring • Power Wiring A set of laboratory devices used for: • separation of gaseous substances and those that can be converted to a gaseous state under chromatographic analysis conditions - by evaporation or by chemical changes • determination of the presence and concentration of a substance in a sample • analyses enabling quantitative determination of a specific substance dissolved in a sample • density analyses • control of parameter constancy • viscosity

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Cedpfx Afew T Rq Solohf

Condition: excellent (used), Year of construction: 2010, Material Testing Machine: ZwickRoell GmbH mod.Z005 TN Designed to perform standard tests on materials and components, allowing for precise measurements of strength, flexibility, and other material properties, which are crucial in engineering and material research. With advanced technology and intuitive software, these machines offer efficient and safe operation. The device includes accessories for measuring material tensile strength, compression, and bending. Cjdpfx Afouna Iujlshf Technical Specifications: • Year of production: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approximately 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption about 800VA The machine allows for the testing of various materials and components, including: • Construction materials: concrete, steel, wood • Plastics: flexibility, tensile strength • Metals: strength, hardness, and fatigue testing • Mechanical components: compression, bending, and tensile tests • Samples in various forms: thin-layered, block-shaped, tubular Thanks to the system's flexibility, tests can be adapted to specific requirements. TAG: Laboratory Equipment, Material Testing, EPS Styrofoam, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Construction Materials, Quality Control, Engineering Research

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Cjdpfoh D Ezgjx Aflehf

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 6770-22060, LEICA 6770 - Beam Aligner Chjdpfx Afothlauslsf The equipment is NEW, it has never been used!!!

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Csdpowkgr Isfx Aflehf Maximum distance between centers for clamping of measured part: 200 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Standard master gear arbor, diameter: 12,7 mm

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the Codpfx Aow N S E Aefljhf the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Cjdsxdfanopfx Afljhf Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 1,750 mm, input voltage: 380 V, table width: 1,500 mm, table length: 2,000 mm, clamping force: 3,000 kN, table load: 14,600 kg, 300T Die Spotting Press Clamping Force:300T Lifting Force:82T Worktable Size:2000*1500mm Max. Daylight:1750mm Min Daylight:0mm Stroke of Bolster:3000mm Overturn capacity:7.3T Overturn Degree:180° Chjdpfeug Ughex Aflsf Motor Power:30Kw

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: Chjdpfsul Efmox Aflsf The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 Chedpertrzdsfx Afljf RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm Chodevr Hf Ejpfx Aflsf inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Chsdpjxzfkbsfx Afljf Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17496, Year of construction: 2017, operating hours: 11,962 h, load capacity: 3,500 kg, lifting height: 5,450 mm, free lift: 1,870 mm, mast type: triplex, fork width: 1,240 mm, TECHNICAL DETAILS Lift height: 5,450 mm Free lift: 1,870 mm Fork length: 1,160 mm Fork width: 1,240 mm Maximum fork width: 1,240 mm Minimum fork width: 440 mm Csdpfx Afjx Ahw Tslohf Lifting capacity: 3,500 kg MACHINE DETAILS Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,600 x 2,720 mm Weight: 6,900 kg Fuel type: electric Year of battery: 2016 Battery capacity: 775 Ah Battery voltage: 80 V Travel direction: 4-way EQUIPMENT Attachment: Fork spreader Documentation CE marking Tested until: 12.2025

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Codpfx Ajx A A S Ejfljhf Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: used, Comprehensively tested, used Netzsch Max Shear 3 Inline disperser. Includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kW 3/50 2885rpm motor. Also includes double acting mechanical seal with 2.6 litre seal pot rated 10 bar at 60 deg.c. Mounted on stainless steel frame. Chedpfxjx Db Nlo Afljf

Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Chedpfox Ahcpjx Aflsf Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: unexamined, mileage: 42,752 km, Year of construction: 2021, DAF LF290 18t Marvtech Hot Box (2021, '71') Test to 30 November 2025 Chodpfx Afexxuvzjlef Usage at last test 42,752km (11/2024)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm Cedpfx Aoxzd Ixsflehf MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Chedpfxsx Db Ize Aflef Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Csdox Ag T Hspfx Aflshf

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Cedpfxjxyxl Aj Aflehf Click on the link below to see a video of the machine running.

Condition: used, Comprehensively tested and refurbished, used Morton model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Chjdpfoxyxlvsx Aflof Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted). Specifications: Bowl Volume: 158.5 gal Motor Power: 29.5 hp Material Of Construction: Stainless Steel Choppers (Y/N): N Number Of Choppers (1-10): 0 HP Of Unit: 29.502 Jacket (Y/N): Y Jacket Pressure: 5.5 Jacket Temperature: 162

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Chodpfoxyxlpox Aflef Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar