Used Testing for sale (10,745)

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C Bwjdpjxbgrgsfx Aiwsw - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption Bsdpfx Aiox Exmtjwoww No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Bsdpfez Iqh Aex Aiweww Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Bsdozp E Dkspfx Aiwsww Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Zwick   Type: BZ1.0 / TH1S   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Bodpozdryzjfx Aiwsww Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength measuring machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression direction: 2.5 kN Bjdpfx Ajzdry Ioiwoww Height (h1): approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting pin) Connection values: Electrical connection: 115/230 V, 4/2 A, 1-phase/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive Bwjdpju Egz Rofx Aiwow · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Automation Assistant Oy Linear Guided Free Fall Tester Automation Assistant Oy LG2750 Professional linear guided free fall test stand for reproducible drop and impact tests For sale is a used Linear Guided Free Fall Tester from the manufacturer Automation Assistant Oy. The test stand is suitable for reproducible drop and impact tests in research, development, quality assurance, and industry. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Machine type: Linear Guided Free Fall Tester Made in Finland Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Bedjzn Uqdepfx Aiwoww Impact material: Concrete garden brick 300 × 300 × 50 mm Dimensions (approx.): Width: 850 mm, Depth: 900 mm, Height: 2750 mm Total weight: approx. 210 kg Test tower: approx. 155 kg Impact table: approx. 55 kg Equipment: Touchscreen control panel Enclosed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Accessories as shown in the pictures Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Scope of delivery: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Bjdpfxszkhxto Aiwoww Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Bodpfszkgqnex Aiwsww Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Article No.: 60885637 Temperature chamber Bwsdeuuin Rjpfx Aiwow Temperature range: -70°C to +180°C Supply voltage: 400V Rated current: 24A Rated power: 9.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Year of manufacture: 1998 Chamber: W x D x H 670 x 640 x 750 mm TK 09 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Andreas Schmid Climate Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3 Air conditioning unit Regulation and Control Climate program controller SE 502 The climate controller includes 4 control zones Program Generator 8 setpoints 32 control tracks 400 segments 25 programs 8 loops per program Temperature range: -40°C to +130°C Temperature stability: +-1.0 K over time Average temperature change rate from -40°C to +80°C: approx. 3K/min Cooling system: Refrigeration compressor, water-cooled Refrigerant: R23 / R 404 A Cooling water inlet temperature: 15 Ambient temperature: 35°C Heating system: electric resistance heating Electrical connection: 240/400 V, 3 PH, N, PE Power consumption Cooling mode: 24 A Bodpfxjuuibke Aiwjww Heating mode: 18 A Dimensions: W x D x H 1600 x 800 x 2250 mm Chamber: W x D x H 670 x 640 x 750 mm Internal: TK16 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Resato HBU-B160 Gas High-Pressure Workshop Testing System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of the plants to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components used for oil and gas extraction. By injecting a chemical fluid, the well is stimulated. With the controller, high-pressure systems control and regulate counter-pressure and fluids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Testing System Type: HBU-B160 Max. Pressure: 200 bar Max. Capacity: 1570 cc Max. Pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Bwedpsr Hmihofx Aiwjw You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) Bodezd Rvzjpfx Aiwjww (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 4055 Temperature Chamber Temperature range: +180°C Rated voltage: 380V, ±10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Test chamber: (L x W x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Attention: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan Bjdpfx Aouuilvjiwsww 15K6 Blind heating Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Zwick / Roell Type: BDO-FB0.5TH Zwick / Roell tensile testing machine, table-top testing machine Material testing machine BDO-FB0.5TH Testing load in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of test area: infinite Test area depth: 100 mm Max. working distance without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Bwsdpfx Aijzdr Hnjwjw Weight: 47 kg Condition: used Scope of supply: (autosampler as shown in the picture) (Subject to changes and errors in the technical data; details are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Bodpfx Aijzd Slkjwjww Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Bwedpezhadcjfx Aiwow Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Bodpfxou Ecrxo Aiweww Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 +- 5.6 kW External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Weight: 390 kg More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Bwsdpfjzd R Auex Aiwjw Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Bwjdpfx Aiezg U Tiowjw Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss climate testing chamber, -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Supply voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A Used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 - 32-bit technology - Graphical display of setpoint and actual values - Digital display of setpoint and actual values for temperature and relative humidity (%) - Digital input for temperature (°C) and relative humidity (%) - Integrated programmer - Program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 Climate chamber Weiss Bedjph U Ayspfx Aiwoww Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm More climate chamber items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, RS Simulators Type: TS 600/45 RS Simulators Temperature Test Chamber, Water-Cooled Temperature Range: -40°C to +180°C Test Chamber Dimensions: Width 850 mm x Height 850 mm x Depth 800 mm External Dimensions: Width 1100 mm x Height 1850 mm x Depth 1500 mm Power Consumption: 13.5 A Refrigerant: R404A Bwedpezdn Stofx Aiwjw Connection Voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Coating testing Material testing Quality assurance Automotive industry Research and development Condition Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery Bwodpfx Aszclxvjiwew 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: Bodszlp Ixspfx Aiwoww To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.